______________________________________________________________________
26 Numerics library [lib.numerics]
______________________________________________________________________
1 This clause describes components that C++ programs may use to perform
seminumerical operations.
2 The following subclauses describe components for complex number types,
numeric ( n-at-a-time) arrays, generalized numeric algorithms, and
facilities included from the ISO C library, as summarized in Table 1:
Table 1--Numerics library summary
+--------------------------------------------------------------+
| Subclause Header(s) |
+--------------------------------------------------------------+
|_lib.numeric.requirements_ Requirements |
+--------------------------------------------------------------+
|_lib.complex.numbers_ Complex numbers <complex> |
+--------------------------------------------------------------+
|_lib.numarray_ Numeric arrays <valarray> |
+--------------------------------------------------------------+
|_lib.numeric.ops_ Generalized numeric operations <numeric> |
+--------------------------------------------------------------+
|_lib.c.math_ C library <cmath> |
| <cstdlib> |
+--------------------------------------------------------------+
26.1 Numeric type requirements [lib.numeric.requirements]
1 The complex and valarray components are parameterized by the type of
information they contain and manipulate. A C++ program shall instan
tiate these components with types that satisfy the following
requirements:1)
--T is not an abstract class (it has no pure virtual member func
tions);
--T is not a reference type;
_________________________
1) In other words, value types. These include built-in arithmetic
types, pointers, the library class complex, and instantiations of
valarray for value types.
--T is not cv-qualified;
--If T is a class, it has a public default constructor;
--If T is a class, it has a public copy constructor with the signature
T::T(const T&)
--If T is a class, it has a public destructor;
--If T is a class, it has a public assignment operator whose signature
is either
T& T::operator=(const T&) or T& T::operator=(T)
--If T is a class, its assignment operator, copy and default construc
tors, and destructor must correspond to each other in the following
sense: Initialization of raw storage using the default constructor,
followed by assignment, is semantically equivalent to initialization
of raw storage using the copy constructor. Destruction of an
object, followed by initialization of its raw storage using the copy
constructor, is semantically equivalent to assignment to the origi
nal object.
[Note: This rule states that there must not be any subtle differ
ences in the semantics of initialization versus assignment. This
gives an implementation considerable flexibility in how arrays are
initialized.
[Example: An implementation is allowed to initialize a valarray by
allocating storage using the new operator (which implies a call to
the default constructor for each element) and then assigning each
element its value. Or the implementation can allocate raw storage
and use the copy constructor to initialize each element. --end
example]
If the distinction between initialization and assignment is impor
tant for a class, or if it fails to satisfy any of the other condi
tions listed above, the programmer should use vector (_lib.vector_)
instead of valarray for that class; --end note]
--If T is a class, it does not overload unary operator&.
2 In addition, many member and related functions of valarray<T> can be
successfully instantiated and will exhibit well-defined behavior if
and only if T satisfies additional requirements specified for each
such member or related function.
3 [Example: It is valid to instantiate valarray<complex>, but opera
tor>() will not be successfully instantiated for valarray<complex>
operands, since complex does not have any ordering operators. --end
example]
26.2 Complex numbers [lib.complex.numbers]
1 The header <complex> defines a template class, and numerous functions
for representing and manipulating complex numbers.
Header <complex> synopsis
namespace std {
template<class T> class complex;
class complex<float>;
class complex<double>;
class complex<long double>;
// _lib.complex.ops_ operators:
template<class T>
complex<T> operator+(const complex<T>&, const complex<T>&);
template<class T> complex<T> operator+(const complex<T>&, T);
template<class T> complex<T> operator+(T, const complex<T>&);
template<class T> complex<T> operator-(const complex<T>&, const complex<T>&);
template<class T> complex<T> operator-(const complex<T>&, T);
template<class T> complex<T> operator-(T, const complex<T>&);
template<class T> complex<T> operator*(const complex<T>&, const complex<T>&);
template<class T> complex<T> operator*(const complex<T>&, T);
template<class T> complex<T> operator*(T, const complex<T>&);
template<class T> complex<T> operator/(const complex<T>&, const complex<T>&);
template<class T> complex<T> operator/(const complex<T>&, const T>&);
template<class T> complex<T> operator/(T, const complex<T>&);
template<class T> complex<T> operator+(const complex<T>&);
template<class T> complex<T> operator-(const complex<T>&);
template<class T> bool operator==(const complex<T>&, const complex<T>&);
template<class T> bool operator==(const complex<T>&, T);
template<class T> bool operator==(T, const complex<T>&);
template<class T> bool operator!=(const complex<T>&, const complex<T>&);
template<class T> bool operator!=(const complex<T>&, T);
template<class T> bool operator!=(T, const complex<T>&);
template<class T, class charT, class traits>
basic_istream<charT, traits>&
operator>>(basic_istream<charT, traits>&, complex<T>&);
template<class T, class charT, class traits>
basic_ostream<charT, traits>&
operator<<(basic_ostream<charT, traits>&, const complex<T>&);
// _lib.complex.value.ops_ values:
template<class T> T real(const complex<T>&);
template<class T> T imag(const complex<T>&);
template<class T> T abs(const complex<T>&);
template<class T> T arg(const complex<T>&);
template<class T> T norm(const complex<T>&);
template<class T> complex<T> conj(const complex<T>&);
template<class T> complex<T> polar(T, T);
// _lib.complex.transcendentals_ transcendentals:
template<class T> complex<T> acos (const complex<T>&);
template<class T> complex<T> asin (const complex<T>&);
template<class T> complex<T> atan (const complex<T>&);
template<class T> complex<T> atan2(const complex<T>&, const complex<T>&);
template<class T> complex<T> atan2(const complex<T>&, T);
template<class T> complex<T> atan2(T, const complex<T>&);
template<class T> complex<T> cos (const complex<T>&);
template<class T> complex<T> cosh (const complex<T>&);
template<class T> complex<T> exp (const complex<T>&);
template<class T> complex<T> log (const complex<T>&);
template<class T> complex<T> log10(const complex<T>&);
template<class T> complex<T> pow(const complex<T>&, int);
template<class T> complex<T> pow(const complex<T>&, T);
template<class T> complex<T> pow(const complex<T>&, const complex<T>&);
template<class T> complex<T> pow(T, const complex<T>&);
template<class T> complex<T> sin (const complex<T>&);
template<class T> complex<T> sinh (const complex<T>&);
template<class T> complex<T> sqrt (const complex<T>&);
template<class T> complex<T> tan (const complex<T>&);
template<class T> complex<T> tanh (const complex<T>&);
}
26.2.1 Template class complex [lib.complex]
namespace std {
template<class T>
class complex {
public:
complex();
complex(T re);
complex(T re, T im);
template<class X> complex(const complex<X>&);
T real() const;
T imag() const;
template<class X> complex<T>& operator= (const complex<X>&);
template<class X> complex<T>& operator+=(const complex<X>&);
template<class X> complex<T>& operator-=(const complex<X>&);
template<class X> complex<T>& operator*=(const complex<X>&);
template<class X> complex<T>& operator/=(const complex<X>&);
friend complex operator+(const complex&, T);
friend complex operator+(T, const complex&);
friend complex operator-(const complex&, T);
friend complex operator-(T, const complex&);
friend complex operator*(const complex&, T);
friend complex operator*(T, const complex&);
friend complex operator/(const complex&, T);
friend complex operator/(T, const complex&);
friend complex operator==(const complex&, T);
friend complex operator==(T, const complex&);
friend complex operator!=(const complex&, T);
friend complex operator!=(T, const complex&);
};
+------- BEGIN BOX 1 -------+
The friend functions above were added to make expressions like c = 1/c
work. They should presumably also be added to the specialisations in
[lib.complex.special] also.
+------- END BOX 1 -------+
1 The class complex describes an object that can store the Cartesian
components, real() and imag(), of a complex number.
26.2.2 complex specializations [lib.complex.special]
class complex<float> {
public:
complex(float re = 0.0f, float im = 0.0f);
explicit complex(const complex<double>&);
explicit complex(const complex<long double>&);
float real() const;
float imag() const;
template<class X> complex<float>& operator= (const complex<X>&);
template<class X> complex<float>& operator+=(const complex<X>&);
template<class X> complex<float>& operator-=(const complex<X>&);
template<class X> complex<float>& operator*=(const complex<X>&);
template<class X> complex<float>& operator/=(const complex<X>&);
};
class complex<double> {
public:
complex(double re = 0.0, double im = 0.0);
complex(const complex<float>&);
explicit complex(const complex<long double>&);
double real() const;
double imag() const;
template<class X> complex<double>& operator= (const complex<X>&);
template<class X> complex<double>& operator+=(const complex<X>&);
template<class X> complex<double>& operator-=(const complex<X>&);
template<class X> complex<double>& operator*=(const complex<X>&);
template<class X> complex<double>& operator/=(const complex<X>&);
};
class complex<long double> {
public:
complex(long double re = 0.0L, long double im = 0.0L);
complex(const complex<float>&);
complex(const complex<double>&);
long double real() const;
long double imag() const;
template<class X> complex<long double>& operator= (const complex<X>&);
template<class X> complex<long double>& operator+=(const complex<X>&);
template<class X> complex<long double>& operator-=(const complex<X>&);
template<class X> complex<long double>& operator*=(const complex<X>&);
template<class X> complex<long double>& operator/=(const complex<X>&);
};
26.2.3 complex member functions [lib.complex.members]
template<class T> complex(T re = T(), T im = T());
Effects:
Constructs an object of class complex.
1 Postcondition: real() == re && imag() == im.
26.2.4 complex member operators [lib.complex.member.ops]
template<class T> complex<T>& operator+=(const complex<T>& rhs);
Effects:
Adds the complex value rhs to the complex value *this and stores the
sum in *this.
Returns:
*this.
template<class T> complex<T>& operator-=(const complex<T>& rhs);
Effects:
Subtracts the complex value rhs from the complex value *this and
stores the difference in *this.
Returns:
*this.
template<class T> complex<T>& operator*=(const complex<T>& rhs);
Effects:
Multiplies the complex value rhs by the complex value *this and
stores the product in *this.
Returns:
*this.
template<class T> complex<T>& operator/=(const complex<T>& rhs);
Effects:
Divides the complex value rhs into the complex value *this and
stores the quotient in *this.
Returns:
*this.
26.2.5 complex non-member operations [lib.complex.ops]
template<class T> complex<T> operator+(const complex<T>& lhs);
Notes:
unary operator.
Returns:
complex<T>(lhs).
template<class T>
complex<T> operator+(const complex<T>& lhs, const complex<T>& rhs);
template<class T> complex<T> operator+(const complex<T>& lhs, T rhs);
template<class T> complex<T> operator+(T lhs, const complex<T>& rhs);
Returns:
complex<T>(lhs) += rhs.
template<class T> complex<T> operator-(const complex<T>& lhs);
Notes:
unary operator.
Returns:
complex<T>(-lhs.real(),-lhs.imag()).
template<class T>
complex<T> operator-(const complex<T>& lhs, const complex<T>& rhs);
template<class T> complex<T> operator-(const complex<T>& lhs, T rhs);
template<class T> complex<T> operator-(T lhs, const complex<T>& rhs);
Returns:
complex<T>(lhs) -= rhs.
template<class T>
complex<T> operator*(const complex<T>& lhs, const complex<T>& rhs);
template<class T> complex<T> operator*(const complex<T>& lhs, T rhs);
template<class T> complex<T> operator*(T lhs, const complex<T>& rhs);
Returns:
complex<T>(lhs) *= rhs.
template<class T>
complex<T> operator/(const complex<T>& lhs, const complex<T>& rhs);
template<class T> complex<T> operator/(const complex<T>& lhs, T rhs);
template<class T> complex<T> operator/(T lhs, const complex<T>& rhs);
Returns:
complex<T>(lhs) /= rhs.
template<class T>
bool operator==(const complex<T>& lhs, const complex<T>& >rhs);
template<class T> bool operator==(const complex<T>& lhs, T rhs);
template<class T> bool operator==(T lhs, const complex<T>& rhs);
Returns:
lhs.real() == rhs.real() && lhs.imag() == rhs.imag().
Notes:
The imaginary part is assumed to be T(), or 0.0, for the T argu
ments.
template<class T>
bool operator!=(complex<T>& lhs, complex<T>& rhs);
template<class T> bool operator!=(complex<T>& lhs, T rhs);
template<class T> bool operator!=(T lhs, complex<T>& rhs);
Returns:
rhs.real() != lhs.real() || rhs.imag() != lhs.imag().
template<class T, class charT, class traits>
basic_istream<charT, traits>&
operator>>(basic_istream<charT, traits>& is, complex<T>& x);
Effects:
Extracts a complex number x of the form: u, (u), or (u,v), where u
is the real part and v is the imaginary part
(_lib.istream.formatted_).
Requires:
The input values be convertible to T.
If bad input is encountered, calls is.setstate(ios::failbit) (which
may throw ios::failure (_lib.iostate.flags_).
Returns:
is.
template<class T, class charT, class traits>
basic_ostream<charT, traits>&
operator<<(basic_ostream<charT, traits>& o, const complex<T>& x);
Effects:
inserts the complex number x onto the stream o as if it were imple
mented as follows:
template<class T, class charT, class traits>
basic_ostream<charT, traits>&
operator<<(basic_ostream<charT, traits>& o, const complex<T>& x)
{
basic_ostringstream<charT, traits> s;
s.flags(o.flags());
s.imbue(o.getloc());
s.precision(o.precision());
s << '(' << x.real() << "," << x.imag() << ')' << ends;
return o << s.str();
}
26.2.6 complex value operations [lib.complex.value.ops]
template<class T> T real(const complex<T>& x);
Returns:
x.real().
template<class T> T imag(const complex<T>& x);
Returns:
x.imag().
template<class T> T arg(const complex<T>& x);
Returns:
the phase angle of x.
template<class T> T norm(const complex<T>& x);
Returns:
the squared magnitude of x.
template<class T> complex<T> conj(const complex<T>& x);
Returns:
the complex conjugate of x.
template<class T> complex<T> polar(T rho, const T& theta = 0);
Returns:
the complex value corresponding to a complex number whose magnitude
is rho and whose phase angle is theta.
26.2.7 complex transcendentals [lib.complex.transcendentals]
template<class T> complex<T> acos (const complex<T>& x);
template<class T> complex<T> asin (const complex<T>& x);
template<class T> complex<T> atan (const complex<T>& x);
template<class T> complex<T> atan2(const complex<T>& x);
template<class T> complex<T> atan2(const complex<T>& x, T y);
template<class T> complex<T> atan2(T x, const complex<T>& y);
template<class T> complex<T> cos (const complex<T>& x);
template<class T> complex<T> cosh (const complex<T>& x);
template<class T> complex<T> exp (const complex<T>& x);
template<class T> complex<T> log (const complex<T>& x);
template<class T> complex<T> log10(const complex<T>& x);
template<class T>
complex<T> pow(const complex<T>& x, const complex<T>& y);
template<class T> complex<T> pow (const complex<T>& x, T y);
template<class T> complex<T> pow (T x, const complex<T>& y);
template<class T> complex<T> pow (const complex<T>& x, int y);
template<class T> complex<T> sin (const complex<T>& x);
template<class T> complex<T> sinh (const complex<T>& x);
template<class T> complex<T> sqrt (const complex<T>& x);
template<class T> complex<T> tan (const complex<T>& x);
template<class T> complex<T> tanh (const complex<T>& x);
1 Each of these functions returns a complex value corresponding to the
mathematical function (_lib.c.math_) computed for complex arguments.
26.3 Numeric arrays [lib.numarray]
Header <valarray> synopsis
#include <cstddef> // for size_t
namespace std {
template<class T> class valarray; // An array of type T
class slice; // a BLAS-like slice out of an array
template<class T> class slice_array;
class gslice; // a generalized slice out of an array
template<class T> class gslice_array;
template<class T> class mask_array; // a masked array
template<class T> class indirect_array; // an indirected array
template<class T> valarray<T> operator*
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator* (const valarray<T>&, const T&);
template<class T> valarray<T> operator* (const T&, const valarray<T>&);
template<class T> valarray<T> operator/
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator/ (const valarray<T>&, const T&);
template<class T> valarray<T> operator/ (const T&, const valarray<T>&);
template<class T> valarray<T> operator%
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator% (const valarray<T>&, const T&);
template<class T> valarray<T> operator% (const T&, const valarray<T>&);
template<class T> valarray<T> operator+
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator+ (const valarray<T>&, const T&);
template<class T> valarray<T> operator+ (const T&, const valarray<T>&);
template<class T> valarray<T> operator-
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator- (const valarray<T>&, const T&);
template<class T> valarray<T> operator- (const T&, const valarray<T>&);
template<class T> valarray<T> operator^
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator^ (const valarray<T>&, const T&);
template<class T> valarray<T> operator^ (const T&, const valarray<T>&);
template<class T> valarray<T> operator&
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator& (const valarray<T>&, const T&);
template<class T> valarray<T> operator& (const T&, const valarray<T>&);
template<class T> valarray<T> operator|
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator| (const valarray<T>&, const T&);
template<class T> valarray<T> operator| (const T&, const valarray<T>&);
template<class T> valarray<T> operator<<
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator<<(const valarray<T>&, const T&);
template<class T> valarray<T> operator<<(const T&, const valarray<T>&);
template<class T> valarray<T> operator>>
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator>>(const valarray<T>&, const T&);
template<class T> valarray<T> operator>>(const T&, const valarray<T>&);
template<class T> valarray<T> operator&&
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator&&(const valarray<T>&, const T&);
template<class T> valarray<T> operator&&(const T&, const valarray<T>&);
template<class T> valarray<T> operator||
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator||(const valarray<T>&, const T&);
template<class T> valarray<T> operator||(const T&, const valarray<T>&);
template<class T>
valarray<bool> operator==(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator==(const valarray<T>&, const T&);
template<class T> valarray<bool> operator==(const T&, const valarray<T>&);
template<class T>
valarray<bool> operator!=(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator!=(const valarray<T>&, const T&);
template<class T> valarray<bool> operator!=(const T&, const valarray<T>&);
template<class T>
valarray<bool> operator< (const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator< (const valarray<T>&, const T&);
template<class T> valarray<bool> operator< (const T&, const valarray<T>&);
template<class T>
valarray<bool> operator> (const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator> (const valarray<T>&, const T&);
template<class T> valarray<bool> operator> (const T&, const valarray<T>&);
template<class T>
valarray<bool> operator<=(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator<=(const valarray<T>&, const T&);
template<class T> valarray<bool> operator<=(const T&, const valarray<T>&);
template<class T>
valarray<bool> operator>=(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator>=(const valarray<T>&, const T&);
template<class T> valarray<bool> operator>=(const T&, const valarray<T>&);
template<class T> T min(const valarray<T>&);
template<class T> T max(const valarray<T>&);
template<class T> valarray<T> abs (const valarray<T>&);
template<class T> valarray<T> acos (const valarray<T>&);
template<class T> valarray<T> asin (const valarray<T>&);
template<class T> valarray<T> atan (const valarray<T>&);
template<class T> valarray<T> atan2(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> atan2(const valarray<T>&, const T&);
template<class T> valarray<T> atan2(const T&, const valarray<T>&);
template<class T> valarray<T> cos (const valarray<T>&);
template<class T> valarray<T> cosh (const valarray<T>&);
template<class T> valarray<T> exp (const valarray<T>&);
template<class T> valarray<T> log (const valarray<T>&);
template<class T> valarray<T> log10(const valarray<T>&);
template<class T> valarray<T> pow (const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> pow (const valarray<T>&, const T&);
template<class T> valarray<T> pow (const T&, const valarray<T>&);
template<class T> valarray<T> sin (const valarray<T>&);
template<class T> valarray<T> sinh (const valarray<T>&);
template<class T> valarray<T> sqrt (const valarray<T>&);
template<class T> valarray<T> tan (const valarray<T>&);
template<class T> valarray<T> tanh (const valarray<T>&);
}
1 The header <valarray> defines five template classes ( valarray,
slice_array, gslice_array, mask_array, and indirect_array), two
classes ( slice and gslice), and a series of related function signa
tures for representing and manipulating arrays of values.
2 The valarray array classes are defined to be free of certain forms of
aliasing, thus allowing operations on these classes to be optimized.
3 These library functions are permitted to throw a bad_alloc
(_lib.bad.alloc_) exception if there are not sufficient resources
available to carry out the operation. Note that the exception is not
mandated.
+------- BEGIN BOX 2 -------+
ISSUE: The descriptions of valarray and the associated classes which
follow lack any discussion of possible exceptions.
+------- END BOX 2 -------+
26.3.1 Template class valarray [lib.template.valarray]
namespace std {
template<class T> class valarray {
public:
// _lib.valarray.cons_ construct/destroy:
valarray();
explicit valarray(size_t);
valarray(const T&, size_t);
valarray(const T*, size_t);
valarray(const valarray&);
valarray(const slice_array<T>&);
valarray(const gslice_array<T>&);
valarray(const mask_array<T>&);
valarray(const indirect_array<T>&);
~valarray();
// _lib.valarray.assign_ assignment:
valarray<T>& operator=(const valarray<T>&);
valarray<T>& operator=(const slice_array<T>&);
valarray<T>& operator=(const gslice_array<T>&);
valarray<T>& operator=(const mask_array<T>&);
valarray<T>& operator=(const indirect_array<T>&);
// _lib.valarray.access_ element access:
T operator[](size_t) const;
T& operator[](size_t);
// _lib.valarray.subset_ subset operations:
valarray<T> operator[](slice) const;
slice_array<T> operator[](slice);
valarray<T> operator[](const gslice&) const;
gslice_array<T> operator[](const gslice&);
valarray<T> operator[](const valarray<bool>&) const;
mask_array<T> operator[](const valarray<bool>&);
valarray<T> operator[](const valarray<size_t>&) const;
indirect_array<T> operator[](const valarray<size_t>&);
// _lib.valarray.unary_ unary operators:
valarray<T> operator+() const;
valarray<T> operator-() const;
valarray<T> operator~() const;
valarray<T> operator!() const;
// _lib.valarray.cassign_ computed assignment:
valarray<T>& operator*= (const T&);
valarray<T>& operator/= (const T&);
valarray<T>& operator%= (const T&);
valarray<T>& operator+= (const T&);
valarray<T>& operator-= (const T&);
valarray<T>& operator^= (const T&);
valarray<T>& operator&= (const T&);
valarray<T>& operator|= (const T&);
valarray<T>& operator<<=(const T&);
valarray<T>& operator>>=(const T&);
valarray<T>& operator*= (const valarray<T>&);
valarray<T>& operator/= (const valarray<T>&);
valarray<T>& operator%= (const valarray<T>&);
valarray<T>& operator+= (const valarray<T>&);
valarray<T>& operator-= (const valarray<T>&);
valarray<T>& operator^= (const valarray<T>&);
valarray<T>& operator|= (const valarray<T>&);
valarray<T>& operator&= (const valarray<T>&);
valarray<T>& operator<<=(const valarray<T>&);
valarray<T>& operator>>=(const valarray<T>&);
// _lib.valarray.members_ member functions:
size_t length() const;
operator T*();
operator const T*() const;
T sum() const;
void fill(const T&);
T min() const;
T max() const;
valarray<T> shift (int) const;
valarray<T> cshift(int) const;
valarray<T> apply(T func(T)) const;
valarray<T> apply(T func(const T&)) const;
void free();
};
}
1 The template class valarray<T> is a one-dimensional smart array, with
elements numbered sequentially from zero. It is a representation of
the mathematical concept of an ordered set of values. The illusion of
higher dimensionality may be produced by the familiar idiom of com
puted indices, together with the powerful subsetting capabilities pro
vided by the generalized subscript operators.2)
2 An implementation is permitted to qualify any of the functions
declared in <valarray> as inline.
26.3.1.1 valarray constructors [lib.valarray.cons]
valarray();
Effects:
Constructs an object of class valarray<T>,3) which has zero length
until it is passed into a library function as a modifiable lvalue or
through a non-constant this pointer. This default constructor is
_________________________
2) The intent is to specify an array template that has the minimum
functionality necessary to address aliasing ambiguities and the pro
liferation of temporaries. Thus, the valarray template is neither a
matrix class nor a field class. However, it is a very useful building
block for designing such classes.
3) For convenience, such objects are referred to as ``arrays''
throughout the remainder of subclause _lib.numarray_.
essential, since arrays of valarray are likely to prove useful.
There must also be a way to change the size of an array after ini
tialization; this is supplied by the semantics of the assignment
operator.
explicit valarray(size_t);
1 The array created by this constructor has a length equal to the value
of the argument. The elements of the array are constructed using the
default constructor for the instantiating type T.
valarray(const T&, size_t);
2 The array created by this constructor has a length equal to the second
argument. The elements of the array are initialized with the value of
the first argument.
valarray(const T*, size_t);
3 The array created by this constructor has a length equal to the second
argument n. The values of the elements of the array are initialized
with the first n values pointed to by the first argument. If the
value of the second argument is greater than the number of values
pointed to by the first argument, the behavior is undefined. This
constructor is the preferred method for converting a C array to a
valarray object.
valarray(const valarray<T>&);
4 The array created by this constructor has the same length as the argu
ment array. The elements are initialized with the values of the cor
responding elements of the argument array. This copy constructor cre
ates a distinct array rather than an alias. Implementations in which
arrays share storage are permitted, but they must implement a copy-on-
reference mechanism to ensure that arrays are conceptually distinct.
valarray(const slice_array<T>&);
valarray(const gslice_array<T>&);
valarray(const mask_array<T>&);
valarray(const indirect_array<T>&);
5 These conversion constructors convert one of the four reference tem
plates to a valarray.
~valarray();
26.3.1.2 valarray assignment [lib.valarray.assign]
valarray<T>& operator=(const valarray<T>&);
1 The assignment operator modifies the length of the *this array to be
equal to that of the argument array. Each element of the *this array
is then assigned the value of the corresponding element of the argu
ment array. Assignment is the usual way to change the length of an
array after initialization. Assignment results in a distinct array
rather than an alias.
valarray<T>& operator=(const slice_array<T>&);
valarray<T>& operator=(const gslice_array<T>&);
valarray<T>& operator=(const mask_array<T>&);
valarray<T>& operator=(const indirect_array<T>&);
2 These operators allow the results of a generalized subscripting opera
tion to be assigned directly to a valarray.
26.3.1.3 valarray element access [lib.valarray.access]
T operator[](size_t) const;
T& operator[](size_t);
1 When applied to a constant array, the subscript operator returns the
value of the corresponding element of the array. When applied to a
non-constant array, the subscript operator returns a reference to the
corresponding element of the array.
2 Thus, the expression (a[i] = q, a[i]) == q evaluates as true for any
non-constant valarray<T> a, any T q, and for any size_t i such that
the value of i is less than the length of a.
3 The expression &a[i+j] == &a[i] + j evaluates as true for all size_t i
and size_t j such that i+j is less than the length of the non-constant
array a.
4 Likewise, the expression &a[i] != &b[j] evaluates as true for any two
non-constant arrays a and b and for any size_t i and size_t j such
that i is less than the length of a and j is less than the length of
b. This property indicates an absence of aliasing and may be used to
advantage by optimizing compilers.4)
_________________________
5 The reference returned by the subscript operator for a non-constant
array is guaranteed to be valid until the array to whose data it
refers is passed into any library function as a modifiable lvalue or
through a non-const this pointer.
6 Computed assigns [such as valarray& operator+=(const valarray&) ] do
not by themselves invalidate references to array data. If the sub
script operator is invoked with a size_t argument whose value is not
less than the length of the array, the behavior is undefined.
26.3.1.4 valarray subset operations [lib.valarray.sub]
valarray<T> operator[](slice) const;
slice_array<T> operator[](slice);
valarray<T> operator[](const gslice&) const;
gslice_array<T> operator[](const gslice&);
valarray<T> operator[](const valarray<bool>&) const;
mask_array<T> operator[](const valarray<bool>&);
valarray<T> operator[](const valarray<size_t>&) const;
indirect_array<T> operator[](const valarray<size_t>&);
1 Each of these operations returns a subset of the array. The const-
qualified versions return this subset as a new valarray. The non-
const versions return a class template object which has reference
semantics to the original array.
26.3.1.5 valarray unary operators [lib.valarray.unary]
valarray<T> operator+() const;
valarray<T> operator-() const;
valarray<T> operator~() const;
valarray<T> operator!() const;
1 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied and for which the indicated
operator returns a value which is of type &T or which may be unambigu
ously converted to type T.
2 Each of these operators returns an array whose length is equal to the
length of the array. Each element of the returned array is initial
ized with the result of applying the indicated operator to the corre
sponding element of the array.
_________________________
4) Compilers may take advantage of inlining, constant propagation,
loop fusion, tracking of pointers obtained from operator new, and oth
er techniques to generate efficient valarrays.
26.3.1.6 valarray computed assignment [lib.valarray.cassign]
valarray<T>& operator*= (const valarray<T>&);
valarray<T>& operator/= (const valarray<T>&);
valarray<T>& operator%= (const valarray<T>&);
valarray<T>& operator+= (const valarray<T>&);
valarray<T>& operator-= (const valarray<T>&);
valarray<T>& operator^= (const valarray<T>&);
valarray<T>& operator&= (const valarray<T>&);
valarray<T>& operator|= (const valarray<T>&);
valarray<T>& operator<<=(const valarray<T>&);
valarray<T>& operator>>=(const valarray<T>&);
1 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied. Each of these operators per
forms the indicated operation on each of its elements and the corre
sponding element of the argument array.
2 The array is then returned by reference.
3 If the array and the argument array do not have the same length, the
behavior is undefined. The appearance of an array on the left hand
side of a computed assignment does not invalidate references or point
ers.
valarray<T>& operator*= (const T&);
valarray<T>& operator/= (const T&);
valarray<T>& operator%= (const T&);
valarray<T>& operator+= (const T&);
valarray<T>& operator-= (const T&);
valarray<T>& operator^= (const T&);
valarray<T>& operator&= (const T&);
valarray<T>& operator|= (const T&);
valarray<T>& operator<<=(const T&);
valarray<T>& operator>>=(const T&);
4 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied.
5 Each of these operators applies the indicated operation to each ele
ment of the array and the scalar argument.
6 The array is then returned by reference.
7 The appearance of an array on the left hand side of a computed assign
ment does not invalidate references or pointers to the elements of the
array.
26.3.1.7 valarray member functions [lib.valarray.members]
size_t length() const;
1 This function returns the number of elements in the array.
operator T*();
operator const T*() const;
2 A non-constant array may be converted to a pointer to the instantiat
ing type. A constant array may be converted to a pointer to the
instantiating type, qualified by const.
3 It is guaranteed that &a[0] == (T*)a for any non-constant valarray<T>
a. The pointer returned for a non-constant array (whether or not it
points to a type qualified by const) is valid for the same duration as
a reference returned by the size_t subscript operator. The pointer
returned for a constant array is valid for the lifetime of the
array.5)
T sum() const;
This function may only be instantiated for a type T to which opera
tor+= can be applied. This function returns the sum of all the ele
ments of the array.
4 If the array has length 0, the behavior is undefined. If the array
has length 1, sum returns the value of element 0. Otherwise, the
returned value is calculated by applying operator+= to a copy of an
element of the array and all other elements of the array in an unspec
ified order.
void fill(const T&);
This function assigns the value of the argument to all the elements of
the array. The length of the array is not changed, nor are any point
ers or references to the elements of the array invalidated.
valarray<T> shift(int) const;
_________________________
5) This form of access is essential for reusability and cross-language
programming.
5 This function returns an array whose length is identical to the array,
but whose element values are shifted the number of places indicated by
the argument.
6 A positive argument value results in a left shift, a negative value in
a right shift, and a zero value in no shift.
7 [Example: If the argument has the value -2, the first two elements of
the result will be constructed using the default constructor; the
third element of the result will be assigned the value of the first
element of the argument; etc. --end example]
valarray<T> cshift(int) const;
8 This function returns an array whose length is identical to the array,
but whose element values are shifted in a circular fashion the number
of places indicated by the argument.
9 A positive argument value results in a left shift, a negative value in
a right shift, and a zero value in no shift.
valarray<T> apply(T func(T)) const;
valarray<T> apply(T func(const T&)) const;
10These functions return an array whose length is equal to the array.
Each element of the returned array is assigned the value returned by
applying the argument function to the corresponding element of the
array.
void free();
11This function sets the length of an array to zero.6)
26.3.2 valarray non-member operations [lib.valarray.nonmembers]
26.3.2.1 valarray binary operators [lib.valarray.binary]
_________________________
6) An implementation may reclaim the storage used by the array when
this function is called.
template<class T> valarray<T> operator*
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator/
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator%
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator+
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator-
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator^
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator&
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator|
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator<<
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator>>
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator&&
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> operator||
(const valarray<T>&, const valarray<T>&);
1 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied and for which the indicated
operator returns a value which is of type T or which can be unambigu
ously converted to type T.
2 Each of these operators returns an array whose length is equal to the
lengths of the argument arrays. Each element of the returned array is
initialized with the result of applying the indicated operator to the
corresponding elements of the argument arrays.
3 If the argument arrays do not have the same length, the behavior is
undefined.
template<class T> valarray<T> operator* (const valarray<T>&, const T&);
template<class T> valarray<T> operator* (const T&, const valarray<T>&);
template<class T> valarray<T> operator/ (const valarray<T>&, const T&);
template<class T> valarray<T> operator/ (const T&, const valarray<T>&);
template<class T> valarray<T> operator% (const valarray<T>&, const T&);
template<class T> valarray<T> operator% (const T&, const valarray<T>&);
template<class T> valarray<T> operator+ (const valarray<T>&, const T&);
template<class T> valarray<T> operator+ (const T&, const valarray<T>&);
template<class T> valarray<T> operator- (const valarray<T>&, const T&);
template<class T> valarray<T> operator- (const T&, const valarray<T>&);
template<class T> valarray<T> operator^ (const valarray<T>&, const T&);
template<class T> valarray<T> operator^ (const T&, const valarray<T>&);
template<class T> valarray<T> operator& (const valarray<T>&, const T&);
template<class T> valarray<T> operator& (const T&, const valarray<T>&);
template<class T> valarray<T> operator| (const valarray<T>&, const T&);
template<class T> valarray<T> operator| (const T&, const valarray<T>&);
template<class T> valarray<T> operator<<(const valarray<T>&, const T&);
template<class T> valarray<T> operator<<(const T&, const valarray<T>&);
template<class T> valarray<T> operator>>(const valarray<T>&, const T&);
template<class T> valarray<T> operator>>(const T&, const valarray<T>&);
template<class T> valarray<T> operator&&(const valarray<T>&, const T&);
template<class T> valarray<T> operator&&(const T&, const valarray<T>&);
template<class T> valarray<T> operator||(const valarray<T>&, const T&);
template<class T> valarray<T> operator||(const T&, const valarray<T>&);
4 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied and for which the indicated
operator returns a value which is of type T or which can be unambigu
ously converted to type T.
5 Each of these operators returns an array whose length is equal to the
length of the array argument. Each element of the returned array is
initialized with the result of applying the indicated operator to the
corresponding element of the array argument and the scalar argument.
26.3.2.2 valarray comparison operators [lib.valarray.comparison]
template<class T> valarray<bool> operator==
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator!=
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator<
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator>
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator<=
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<bool> operator>=
(const valarray<T>&, const valarray<T>&);
1 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied and for which the indicated
operator returns a value which is of type bool or which can be unam
biguously converted to type bool.
2 Each of these operators returns a bool array whose length is equal to
the length of the array arguments. Each element of the returned array
is initialized with the result of applying the indicated operator to
the corresponding elements of the argument arrays.
3 If the two array arguments do not have the same length, the behavior
is undefined.
template<class T> valarray<bool> operator==(const valarray&, const T&);
template<class T> valarray<bool> operator==(const T&, const valarray&);
template<class T> valarray<bool> operator!=(const valarray&, const T&);
template<class T> valarray<bool> operator!=(const T&, const valarray&);
template<class T> valarray<bool> operator< (const valarray&, const T&);
template<class T> valarray<bool> operator< (const T&, const valarray&);
template<class T> valarray<bool> operator> (const valarray&, const T&);
template<class T> valarray<bool> operator> (const T&, const valarray&);
template<class T> valarray<bool> operator<=(const valarray&, const T&);
template<class T> valarray<bool> operator<=(const T&, const valarray&);
template<class T> valarray<bool> operator>=(const valarray&, const T&);
template<class T> valarray<bool> operator>=(const T&, const valarray&);
4 Each of these operators may only be instantiated for a type T to which
the indicated operator can be applied and for which the indicated
operator returns a value which is of type bool or which can be unam
biguously converted to type bool.
5 Each of these operators returns a bool array whose length is equal to
the length of the array argument. Each element of the returned array
is initialized with the result of applying the indicated operator to
the corresponding element of the array and the scalar argument.
26.3.2.3 valarray min and max functions [lib.valarray.min.max]
template<class T> T min(const valarray<T>& a);
template<class T> T max(const valarray<T>& a);
1 These functions may only be instantiated for a type T to which opera
tor> and operator< may be applied and for which operator> and opera
tor< return a value which is of type bool or which can be unambigu
ously converted to type bool.
2 These functions return the minimum ( a.min()) or maximum ( a.max())
value found in the argument array a.
3 The value returned for an array of length 0 is undefined. For an
array of length 1, the value of element 0 is returned. For all other
array lengths, the determination is made using operator> and opera
tor<, in a manner analogous to the application of operator+= for the
sum function.
26.3.2.4 valarray transcendentals [lib.valarray.transcend]
template<class T> valarray<T> abs (const valarray<T>&);
template<class T> valarray<T> acos (const valarray<T>&);
template<class T> valarray<T> asin (const valarray<T>&);
template<class T> valarray<T> atan (const valarray<T>&);
template<class T> valarray<T> atan2
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> atan2(const valarray<T>&, const T&);
template<class T> valarray<T> atan2(const T&, const valarray<T>&);
template<class T> valarray<T> cos (const valarray<T>&);
template<class T> valarray<T> cosh (const valarray<T>&);
template<class T> valarray<T> exp (const valarray<T>&);
template<class T> valarray<T> log (const valarray<T>&);
template<class T> valarray<T> log10(const valarray<T>&);
template<class T> valarray<T> pow
(const valarray<T>&, const valarray<T>&);
template<class T> valarray<T> pow (const valarray<T>&, const T&);
template<class T> valarray<T> pow (const T&, const valarray<T>&);
template<class T> valarray<T> sin (const valarray<T>&);
template<class T> valarray<T> sinh (const valarray<T>&);
template<class T> valarray<T> sqrt (const valarray<T>&);
template<class T> valarray<T> tan (const valarray<T>&);
template<class T> valarray<T> tanh (const valarray<T>&);
1 Each of these functions may only be instantiated for a type T to which
a unique function with the indicated name can be applied. This func
tion must return a value which is of type T or which can be unambigu
ously converted to type T.
26.3.3 Class slice [lib.class.slice]
namespace std {
class slice {
public:
slice();
slice(size_t, size_t, size_t);
size_t start() const;
size_t length() const;
size_t stride() const;
};
}
1 The slice class represents a BLAS-like slice from an array. Such a
slice is specified by a starting index, a length, and a stride.7)
_________________________
7) C++ programs may instantiate this class.
26.3.3.1 slice constructors [lib.cons.slice]
slice();
slice(size_t start, size_t length, size_t stride);
slice(const slice&);
1 The default constructor for slice creates a slice which specifies no
elements. A default constructor is provided only to permit the decla
ration of arrays of slices. The constructor with arguments for a
slice takes a start, length, and stride parameter.
2 [Example: slice(3, 8, 2) constructs a slice which selects elements 3,
5, 7, ... 17 from an array. --end example]
26.3.3.2 slice access functions [lib.slice.access]
size_t start() const;
size_t length() const;
size_t stride() const;
1 These functions return the start, length, or stride specified by a
slice object.
26.3.4 Template class slice_array [lib.template.slice.array]
namespace std {
template <class T> class slice_array {
public:
void operator= (const valarray<T>&) const;
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
void fill(const T&);
~slice_array();
private:
slice_array();
slice_array(const slice_array&);
slice_array& operator=(const slice_array&);
// remainder implementation defined
};
}
1 The slice_array template is a helper template used by the slice sub
script operator
slice_array<T> valarray<T>::operator[](slice);
It has reference semantics to a subset of an array specified by a
slice object.
2 [Example: The expression a[slice(1, 5, 3)] = b; has the effect of
assigning the elements of b to a slice of the elements in a. For the
slice shown, the elements selected from a are 1, 4, ..., 13. --end
example]
3 [Note: C++ programs may not instantiate slice_array, since all its
constructors are private. It is intended purely as a helper class and
should be transparent to the user. --end note]
26.3.4.1 slice_array constructors [lib.cons.slice.arr]
slice_array();
slice_array(const slice_array&);
1 The slice_array template has no public constructors. These construc
tors are declared to be private. These constructors need not be
defined.
26.3.4.2 slice_array assignment [lib.slice.arr.assign]
void operator=(const valarray<T>&) const;
slice_array& operator=(const slice_array&);
1 The second of these two assignment operators is declared private and
need not be defined. The first has reference semantics, assigning the
values of the argument array elements to selected elements of the
valarray<T> object to which the slice_array object refers.
26.3.4.3 slice_array computed [lib.slice.arr.comp.assign]
assignment
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
1 These computed assignments have reference semantics, applying the
indicated operation to the elements of the argument array and selected
elements of the valarray<T> object to which the slice_array object
refers.
26.3.4.4 slice_array fill function [lib.slice.arr.fill]
void fill(const T&);
1 This function has reference semantics, assigning the value of its
argument to the elements of the valarray<T> object to which the
slice_array object refers.
26.3.5 The gslice class [lib.class.gslice]
namespace std {
class gslice {
public:
gslice();
gslice(size_t s, const valarray<size_t>& l, const valarray<size_t>& d);
size_t start() const;
valarray<size_t> length() const;
valarray<size_t> stride() const;
};
}
1 This class represents a generalized slice out of an array. A gslice
is defined by a starting offset (s), a set of lengths (lj), and a set
of strides (dj). The number of lengths must equal the number of
strides.
2 A gslice represents a mapping from a set of indices (ij), equal in
number to the number of strides, to a single index k. It is useful
for building multidimensional array classes using the valarray tem
plate, which is one-dimensional. The set of one-dimensional index
values specified by a gslice are k=s+>ijdj where the multidimensional
indices ij range in value from 0 to lij-1.
3 [Example: The gslice specification
start = 3
length = {2, 4, 3}
stride = {19, 4, 1}
yields the sequence of one-dimensional indices
k=3+(0,1)×19+(0,1,2,3)×4+(0,1,2)×1
which are ordered as shown in the following table:
(i0, i1, i2, k) =
(0, 0, 0, 3),
(0, 0, 1, 4),
(0, 0, 2, 5),
(0, 1, 0, 7),
(0, 1, 1, 8),
(0, 1, 2, 9),
(0, 2, 0, 11),
(0, 2, 1, 12),
(0, 2, 2, 13),
(0, 3, 0, 15),
(0, 3, 1, 16),
(0, 3, 2, 17),
(1, 0, 0, 22),
(1, 0, 1, 23),
...
(1, 3, 2, 36)
That is, the highest-ordered index turns fastest. --end example]
4 It is possible to have degenerate generalized slices in which an
address is repeated.
5 [Example: If the stride parameters in the previous example are changed
to {1, 1, 1}, the first few elements of the resulting sequence of
indices will be
(0, 0, 0, 3),
(0, 0, 1, 4),
(0, 0, 2, 5),
(0, 1, 0, 4),
(0, 1, 1, 5),
(0, 1, 2, 6),
...
--end example]
6 If a degenerate slice is used as the argument to the non-const version
of operator[](const gslice&), the resulting behavior is undefined.
26.3.5.1 gslice constructors [lib.gslice.cons]
gslice();
gslice(size_t start, const valarray<size_t>& lengths,
const valarray<size_t>& strides);
gslice(const gslice&);
1 The default constructor creates a gslice which specifies no elements.
The constructor with arguments builds a gslice based on a specifica
tion of start, lengths, and strides, as explained in the previous sec
tion.
26.3.5.2 gslice access functions [lib.gslice.access]
size_t start() const;
valarray<size_t> length() const;
valarray<size_t> stride() const;
These access functions return the representation of the start,
lengths, or strides specified for the gslice.
26.3.6 Template class gslice_array [lib.template.gslice.array]
namespace std {
template <class T> class gslice_array {
public:
void operator= (const valarray<T>&) const;
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
void fill(const T&);
~gslice_array();
private:
gslice_array();
gslice_array(const gslice_array&);
gslice_array& operator=(const gslice_array&);
// remainder implementation defined
};
}
1 This template is a helper template used by the slice subscript opera
tor
gslice_array<T> valarray<T>::operator[](const gslice&);
It has reference semantics to a subset of an array specified by a
gslice object.
2 Thus, the expression a[gslice(1, length, stride)] = b has the effect
of assigning the elements of b to a generalized slice of the elements
in a.
3 [Note: C++ programs may not instantiate gslice_array, since all its
constructors are private. It is intended purely as a helper class and
should be transparent to the user. --end note]
26.3.6.1 gslice_array constructors [lib.gslice.array.cons]
gslice_array();
gslice_array(const gslice_array&);
1 The gslice_array template has no public constructors. It declares the
above constructors to be private. These constructors need not be
defined.
26.3.6.2 gslice_array assignment [lib.gslice.array.assign]
void operator=(const valarray<T>&) const;
gslice_array& operator=(const gslice_array&);
1 The second of these two assignment operators is declared private and
need not be defined. The first has reference semantics, assigning the
values of the argument array elements to selected elements of the
valarray<T> object to which the gslice_array refers.
26.3.6.3 gslice_array computed [lib.gslice.array.comp.assign]
assignment
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
1 These computed assignments have reference semantics, applying the
indicated operation to the elements of the argument array and selected
elements of the valarray<T> object to which the gslice_array object
refers.
26.3.6.4 gslice_array fill function [lib.gslice.array.fill]
void fill(const T&);
1 This function has reference semantics, assigning the value of its
argument to the elements of the valarray<T> object to which the
gslice_array object refers.
26.3.7 Template class mask_array [lib.template.mask.array]
namespace std {
template <class T> class mask_array {
public:
void operator= (const valarray<T>&) const;
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
void fill(const T&);
~mask_array();
private:
mask_array();
mask_array(const mask_array&);
mask_array& operator=(const mask_array&);
// remainder implementation defined
};
}
1 This template is a helper template used by the mask subscript opera
tor:
mask_array<T> valarray<T>::operator[](const valarray<bool>&).
It has reference semantics to a subset of an array specified by a
boolean mask. Thus, the expression a[mask] = b; has the effect of
assigning the elements of b to the masked elements in a (those for
which the corresponding element in mask is true.
2 [Note: C++ programs may not declare instances of mask_array, since all
its constructors are private. It is intended purely as a helper
class, and should be transparent to the user. --end note]
26.3.7.1 mask_array constructors [lib.mask.array.cons]
mask_array();
mask_array(const mask_array&);
1 The mask_array template has no public constructors. It declares the
above constructors to be private. These constructors need not be
defined.
26.3.7.2 mask_array assignment [lib.mask.array.assign]
void operator=(const valarray<T>&) const;
mask_array& operator=(const mask_array&);
1 The second of these two assignment operators is declared private and
need not be defined. The first has reference semantics, assigning the
values of the argument array elements to selected elements of the
valarray<T> object to which it refers.
26.3.7.3 mask_array computed [lib.mask.array.comp.assign]
assignment
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
1 These computed assignments have reference semantics, applying the
indicated operation to the elements of the argument array and selected
elements of the valarray<T> object to which the mask object refers.
26.3.7.4 mask_array fill function [lib.mask.array.fill]
void fill(const T&);
This function has reference semantics, assigning the value of its
argument to the elements of the valarray<T> object to which the
mask_array object refers.
26.3.8 Template class [lib.template.indirect.array]
indirect_array
namespace std {
template <class T> class indirect_array {
public:
void operator= (const valarray<T>&) const;
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
void fill(const T&);
~indirect_array();
private:
indirect_array();
indirect_array(const indirect_array&);
indirect_array& operator=(const indirect_array&);
// remainder implementation defined
};
}
1 This template is a helper template used by the indirect subscript
operator
indirect_array<T> valarray<T>::operator[](const valarray<int>&).
It has reference semantics to a subset of an array specified by an
indirect_array. Thus the expression a[indirect] = b; has the effect
of assigning the elements of b to the elements in a whose indices
appear in indirect.
2 [Note: C++ programs may not declare instances of indirect_array, since
all its constructors are private. It is intended purely as a helper
class, and should be transparent to the user. --end note]
26.3.8.1 indirect_array constructors [lib.indirect.array.cons]
indirect_array();
indirect_array(const indirect_array&);
The indirect_array template has no public constructors. The construc
tors listed above are private. These constructors need not be
defined.
26.3.8.2 indirect_array assignment [lib.indirect.array.assign]
void operator=(const valarray<T>&) const;
indirect_array& operator=(const indirect_array&);
1 The second of these two assignment operators is declared private and
need not be defined. The first has reference semantics, assigning the
values of the argument array elements to selected elements of the
valarray<T> object to which it refers.
2 If the indirect_array specifies an element in the valarray<T> object
to which it refers more than once, the behavior is undefined.
3 [Example:
int addr[] = {2, 3, 1, 4, 4};
valarray<int> indirect(addr, 5);
valarray<double> a(0., 10), b(1., 5);
array[indirect] = b;
results in undefined behavior since element 4 is specified twice in
the indirection. --end example]
26.3.8.3 indirect_array [lib.indirect.array.comp.assign]
computed assignment
void operator*= (const valarray<T>&) const;
void operator/= (const valarray<T>&) const;
void operator%= (const valarray<T>&) const;
void operator+= (const valarray<T>&) const;
void operator-= (const valarray<T>&) const;
void operator^= (const valarray<T>&) const;
void operator&= (const valarray<T>&) const;
void operator|= (const valarray<T>&) const;
void operator<<=(const valarray<T>&) const;
void operator>>=(const valarray<T>&) const;
1 These computed assignments have reference semantics, applying the
indicated operation to the elements of the argument array and selected
elements of the valarray<T> object to which the indirect_array object
refers.
2 If the indirect_array specifies an element in the valarray<T> object
to which it refers more than once, the behavior is undefined.
26.3.8.4 indirect_array fill function [lib.indirect.array.fill]
void fill(const T&);
1 This function has reference semantics, assigning the value of its
argument to the elements of the valarray<T> object to which the indi
rect_array object refers.
26.4 Generalized numeric operations [lib.numeric.ops]
Header <numeric> synopsis
namspace std {
template <class InputIterator, class T>
T accumulate(InputIterator first, InputIterator last, T init);
template <class InputIterator, class T, class BinaryOperation>
T accumulate(InputIterator first, InputIterator last, T init,
BinaryOperation binary_op);
template <class InputIterator1, class InputIterator2, class T>
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init);
template <class InputIterator1, class InputIterator2, class T,
class BinaryOperation1, class BinaryOperation2>
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init,
BinaryOperation1 binary_op1, BinaryOperation2 binary_op2);
template <class InputIterator, class OutputIterator>
OutputIterator partial_sum(InputIterator first, InputIterator last,
OutputIterator result);
template <class InputIterator, class OutputIterator, class BinaryOperation>
OutputIterator partial_sum(InputIterator first, InputIterator last,
OutputIterator result, BinaryOperation binary_op);
template <class InputIterator, class OutputIterator>
OutputIterator adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result);
template <class InputIterator, class OutputIterator, class BinaryOperation>
OutputIterator adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result,
BinaryOperation binary_op);
}
26.4.1 Accumulate [lib.accumulate]
template <class InputIterator, class T>
T accumulate(InputIterator first, InputIterator last, T init);
template <class InputIterator, class T, class BinaryOperation>
T accumulate(InputIterator first, InputIterator last, T init,
BinaryOperation binary_op);
Effects:
Initializes the accumulator acc with the initial value init and then
modifies it with acc = acc + *i or acc = binary_op(acc, *i) for
every iterator i in the range [first, last) in order.8)
Requires:
binary_op shall not cause side effects.
26.4.2 Inner product [lib.inner.product]
_________________________
8) accumulate is similar to the APL reduction operator and Common Lisp
reduce function, but it avoids the difficulty of defining the result
of reduction on an empty sequence by always requiring an initial val
ue.
template <class InputIterator1, class InputIterator2, class T>
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init);
template <class InputIterator1, class InputIterator2, class T,
class BinaryOperation1, class BinaryOperation2>
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init,
BinaryOperation1 binary_op1,
BinaryOperation2 binary_op2);
Effects:
Computes its result by initializing the accumulator acc with the
initial value init and then modifying it with acc = acc + (*i1) *
(*i2) or acc = binary_op1(acc, binary_op2(*i1, *i2)) for every iter
ator i1 in the range [first, last) and iterator i2 in the range
[first2, first2 + (last - first)) in order.
Requires:
binary_op1 and binary_op2 shall not cause side effects.
26.4.3 Partial sum [lib.partial.sum]
template <class InputIterator, class OutputIterator>
OutputIterator
partial_sum(InputIterator first, InputIterator last,
OutputIterator result);
template
<class InputIterator, class OutputIterator, class BinaryOperation>
OutputIterator
partial_sum(InputIterator first, InputIterator last,
OutputIterator result, BinaryOperation binary_op);
Effects:
Assigns to every iterator i in the range [result, result + (last -
first)) a value correspondingly equal to
((...(*first + *(first + 1)) + ...) + *(first + (i - result)))
or
binary_op(binary_op(..., binary_op(*first, *(first + 1)),...),
*(first + (i - result)))
Returns:
result + (last - first).
Complexity:
Exactly (last - first) - 1 applications of binary_op.
Requires:
binary_op is expected not to have any side effects.
Notes:
result may be equal to first.
26.4.4 Adjacent difference [lib.adjacent.difference]
template <class InputIterator, class OutputIterator>
OutputIterator
adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result);
template
<class InputIterator, class OutputIterator, class BinaryOperation>
OutputIterator
adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result,
BinaryOperation binary_op);
Effects:
Assigns to every element referred to by iterator i in the range
[result + 1, result + (last - first)) a value correspondingly equal
to
*(first + (i - result)) - *(first + (i - result) - 1)
or
binary_op(*(first + (i - result)), *(first + (i - result) - 1)).
result gets the value of *first.
Requires:
binary_op shall not have any side effects.
Notes:
result may be equal to first.
Returns:
result + (last - first).
Complexity:
Exactly (last - first) - 1 applications of binary_op.
26.5 C Library [lib.c.math]
1 Headers <cmath> and <cstdlib> ( abs(), div(), rand(), srand()).
Table 1--Header <cmath> synopsis
+----------------------------------------+
| Type Name(s) |
+----------------------------------------+
|Macro: HUGE_VAL |
+----------------------------------------+
|Functions: |
|acos cos fmod modf tan |
|asin cosh frexp pow tanh |
|atan exp ldexp sin |
|atan2 fabs log sinh |
|ceil floor log10 sqrt |
+----------------------------------------+
Table 1--Header <cstdlib> synopsis
+----------------------------+
| Type Name(s) |
+----------------------------+
|Macros: RAND_MAX |
+----------------------------+
|Types: div_t ldiv_t |
+----------------------------+
|Functions: |
|abs labs srand |
|div ldiv rand |
+----------------------------+
2 The contents are the same as the Standard C library, with the follow
ing additions:
3 In addition to the int versions of certain math functions in <cst
dlib>, C++ adds long overloaded versions of these functions, with the
same semantics.
4 The added signatures are:
long abs(long); // labs()
ldiv_t div(long, long); // ldiv()
5 In addition to the double versions of the math functions in <cmath>,
C++ adds float and long double overloaded versions of these functions,
with the same semantics.
6 The added signatures are:
float abs (float);
float acos (float);
float asin (float);
float atan (float);
float atan2(float, float);
float ceil (float);
float cos (float);
float cosh (float);
float exp (float);
float fabs (float);
float floor(float);
float fmod (float, float);
float frexp(float, int*);
float modf (float, float*);
float ldexp(float, int);
float log (float);
float log10(float);
float pow (float, float);
float pow (float, int);
float sin (float);
float sinh (float);
float sqrt (float);
float tan (float);
float tanh (float);
double abs(double); // fabs()
double pow(double, int);
long double abs (long double);
long double acos (long double);
long double asin (long double);
long double atan (long double);
long double atan2(long double, long double);
long double ceil (long double);
long double cos (long double);
long double cosh (long double);
long double exp (long double);
long double fabs (long double);
long double floor(long double);
long double frexp(long double, int*);
long double fmod (long double, long double);
long double frexp(long double, int*);
long double log (long double);
long double log10(long double);
long double modf (long double, long double*);
long double pow (long double, long double);
long double pow (long double, int);
long double sin (long double);
long double sinh (long double);
long double sqrt (long double);
long double tan (long double);
long double tanh (long double);
SEE ALSO: ISO C subclauses 7.5, 7.10.2, 7.10.6.