P1072R10
basic_string::resize_and_overwrite

1. Motivation

Performance sensitive code is impacted by the cost of initializing and manipulating strings. When writing data into a basic_string, a programmer is faced with an unhappy choice:

• Pay for extra initialization — resize, which zero initializes, followed by copy.

• Pay for extra copies — Populate a temporary buffer, copy it to the string.

• Pay for extra "bookkeeping" — reserve followed by small appends, each of which checks capacity and null terminates.

The effects of these unhappy choices can all be measured at scale, yet C++'s hallmark is to leave no room between the language (or in this case the library) and another language.

LEWGI polled on this at the [SAN] Meeting:

We should promise more committee time to [P1072R1], knowing that our time is scarce and this will leave less time for other work?
Unanimous consent

LEWG at the [SAN] Meeting:

We want to solve this problem

SF	F	N	A	SA
17	5	0	0	0

Willing to solve this for string without solving it for vector

SF	F	N	A	SA
6	9	2	1	0

2. Proposal

This proposal addresses the problem by adding basic_string::resize_and_overwrite:

template<class Operation>
constexpr void resize_and_overwrite(size_type n, Operation op);

7. Effects: Alters the value of *this as follows:

   • — If n <= size(), erases the last size() - n elements.
   • — If n > size(), appends n - size() default-initialized elements.
   • — Invokes erase(begin() + op(data(), n), end()).

8. Remarks:

   If op throws the behavior is undefined.

   Let o = size() before the call to resize_and_overwrite.

   Let m = op(data(), n).

   m <= n otherwise the behavior is undefined.

   If m > o, op shall replace ([expr.ass]) the values stored in the character array [data() + o, data() + m). Until replaced, the values may be indeterminate [basic.indet] [Note: *(data() + o) may not be charT(). - end note]

   op may write to data() + n + 1. Any value written will be replaced with charT() after op returns. [Note: This facilitiates interoperation with functions that write a trailing null. - end note ]

   When op is called *this is in an unspecified state. op shall not bind or in any way access *this.

   op shall not allow its first argument to be accessible after it returns.

In order to enable resize_and_overwrite, this proposal makes it implementation-defined whether basic_string uses allocator_traits::construct and allocator_traits::destroy to construct and destroy the "char-like objects" that it controls. See § 5.2 Allocator Interaction and § 8 Wording below for more details.

3. Implementation

libc++ includes a private implementation of a prior version of this proposal (based on an earlier revision) and uses it to avoid a dynamic allocation in std::filesystem [LIBC++].

4. Examples

4.1. Stamping a Pattern

Consider writing a pattern several times into a string:

std::string GeneratePattern(const std::string& pattern, size_t count) {
   std::string ret;

   ret.reserve(pattern.size() * count);
   for (size_t i = 0; i < count; i++) {
     // SUB-OPTIMAL:
     // * Writes 'count' nulls
     // * Updates size and checks for potential resize 'count' times
     ret.append(pattern);
   }

   return ret;
}

Alternatively, we could adjust the output string’s size to its final size, avoiding the bookkeeping in append at the cost of extra initialization:

std::string GeneratePattern(const std::string& pattern, size_t count) {
   std::string ret;

   const auto step = pattern.size();
   // SUB-OPTIMAL: We memset step*count bytes only to overwrite them.
   ret.resize(step * count);
   for (size_t i = 0; i < count; i++) {
     // GOOD: No bookkeeping
     memcpy(ret.data() + i * step, pattern.data(), step);
   }

   return ret;
}

With this proposal:

std::string GeneratePattern(const std::string& pattern, size_t count) {
   std::string ret;

   const auto step = pattern.size();
   // GOOD: No initialization
   ret.resize_and_overwrite(step * count, [&](char* buf, size_t n) {
       for (size_t i = 0; i < count; i++) {
         // GOOD: No bookkeeping
         memcpy(buf + i * step, pattern.data(), step);
       }
       return step * count;
   });

   return ret;
}

4.2. Interacting with C

Consider wrapping a C API while working in terms of C++'s basic_string vocabulary. We anticipate over-allocating, as computation of the length of the data is done simultaneously with the computation of the contents.

extern "C" {
  int compress(void* out, size_t* out_size, const void* in, size_t in_size);
  size_t compressBound(size_t bound);
}

std::string CompressWrapper(std::string_view input) {
    std::string compressed;
    // Compute upper limit of compressed input.
    size_t size = compressBound(input.size());

    // SUB-OPTIMAL: Extra initialization
    compressed.resize(size);
    int ret = compress(&*compressed.begin(), &size, input.data(), input.size());
    if (ret != OK) {
      throw ...some error...
    }

    // Set actual size.
    compressed.erase(size);
    return compressed;
}

With this proposal:

extern "C" {
  int compress(void* out, size_t* out_size, const void* in, size_t in_size);
  size_t compressBound(size_t bound);
}

std::string CompressWrapper(std::string_view input) {
    std::string compressed;
    // Compute upper limit of compressed input.
    size_t bound = compressBound(input.size());
    int ret;

    // GOOD: No initialization
    compressed.resize_and_overwrite(bound, [&](char* buf, size_t n) {
        size_t compressed_size = n;
        ret = compress(buf, &out_size, input.data(), input.size());
        return compressed_size;
    });
    if (ret != OK) {
       throw ...some error...
    }
    return compressed;
}

5. Design Considerations

5.1. Method vs. Alternatives

During the [SAN] Meeting LEWG expressed a preference for implementing this functionality as a new method on basic_string (as proposed in [P1072R0]) rather than a standalone "storage buffer" type (one option in [P1072R1]):

Method on string vs storage_buffer type:

Strong Method	Method	Neutral	Type	Strong Type
9	2	3	2	2

During the [KOA] Meeting, LEWG expressed a preference for not weakening basic_string's invariants after resize_and_overwrite returns. Under this revision:

• A default-initialized buffer is only accessible to op.

• Under penalty of undefined behavior, op must assign (replace) the values in resulting buffer. The default initialized portion ([data()+m, data()+n)) above is erased and inaccessible to the program without further violation of class invariants.

• This proposal follows the "lambda" option discussed in [SAN].

Several other alternatives were discussed at [SAN], [KOA], and on the reflector. Please see § 6 Alternatives Considered below for more details.

5.2. Allocator Interaction

Unlocking the desired optimizations requires some change to basic_string's interaction with allocators. This proposal does what we think is the simplest possible change: remove the requirement that basic_string call allocator_traits::construct or allocator_traits::destroy.

This restriction should be acceptable because basic_string is defined to only hold "non-array trivial standard-layout" types. [strings.general] p1:

This Clause describes components for manipulating sequences of any non-array trivial standard-layout (6.7) type. Such types are called char-like types, and objects of char-like types are called char-like objects or simply characters.

Removing calls to construct and destroy is compatible with pmr::basic_string as long as uses_allocator_v<charT> is false, which should be the case in practice.

Along the way, this proposal clarifies ambiguous language in [string.require] and [container.requirements.general] by:

• Stating explicitly that basic_string is allocator-aware.

• Introducing the term "allocator-aware" earlier in [container.requirements.general].

• Not attempting to mention other "components" in [container.requirements.general]. The other allocator-aware containers (just basic_string and regex::match_results?) can independently state that they are "allocator-aware" in their own clauses.

libstdc++ and msvc allow strings of non-trivial type. That might force those libraries to continue to support construct and destroy as "extensions". On the other hand, libc++ disallows non-trivial charTs, so any such extensions are non-portable. See godbolt.org.

5.3. Undefined Behavior

resize_and_overwrite exposes users to UB if they read indeterminate ([basic.indet]) values in the string buffer passed to op. Despite this foot-gun, resize_and_overwrite is appealing because:

• Uninitialized buffers are not uncommon in C++. See for example new T[20] or the recently adopted make_unique_for_overwrite.

• Dynamic analyzers like Memory Sanitizer [MSan] and Valgrind [Valgrind] can catch uninitialized reads.

The version of this proposal seen by LEWG in [Cologne] throws std::range_error when op returns a value greater than n. The authors now recommend and LEWG confirmed via [LEWGNovTelecon] to use UB. For the op to have written greater than n bytes, it would have had to overrun the provided buffer (already UB).

The authors further recommend UB if op were to throw. resize_and_overwrite is motivated by measured performance improvements that are small individually but significant at scale. Providing exception guarantees would incur overhead that is in tension with the original motivation.

5.4. Bikeshedding

What do we want to call this method?

• resize_and_overwrite (as proposed). This is consistent with make_unique_for_overwrite [P1973R1]. Unlike the make_unique version, this concludes with the buffer being overwritten (as far as op specifies), rather than requiring further action be taken.

• resize_default_init (as proposed). This is consistent with make_unique_default_init [P1020R1], adopted in San Diego. This name was removed from the working paper subsequently and renaemd make_unique_for_overwrite.

• resize_uninitialized (as proposed in R0). "Uninitialized" is different from "default-initialized", which is what we want to specify. Also, uninitialized is already used elsewhere in the Library to mean "not constructed at all", as in uninitialized_copy; so this would be an overloading of the term.

6. Alternatives Considered

6.1. Tag Type

At the [SAN] Meeting, LEWG showed support for a tag argument type:

Approval (vote for as many as you find acceptable)

13	Go back to resize_uninitialized
15	Do tag type (default_initialize) for c’tor / resize()
12	Continue with storage_buffer (as per R2 of this paper)
7	Crack open with a lambda
7	RAII separate type

For example:

std::string GeneratePattern(const std::string& pattern, size_t count) {
   const auto step = pattern.size();

   // GOOD:  No initialization
   std::string ret(step * count, std::string::default_init);
   for (size_t i = 0; i < count; i++) {
     // GOOD: No bookkeeping
     memcpy(ret.data() + i * step, pattern.data(), step);
   }

   return ret;
}

Benefits:

• A constructor that takes a tag type simplifies some use cases, like the example above.

• Matches existing practice in Boost. See § 7.7 Boost.

Drawbacks:

• Feature creep / complexity — A tag type invites generalizing for all allocator-aware container types. We agree that this is desirable and even has implementation experience in Boost. However default initialization is not enough. There is also "implicit construction" (see [P1010R1], [P0593R2]) and "relocation" (see [P1144R0], [P1029R1]). Neither of these features are yet in the language. It is too early to generalize. Note that the second poll quoted in § 1 Motivation shows support for solving this problem for [basic_]string but not vector.

• In reflector discussion of make_unique_default_init [Zero], there was a preference for avoiding tag types. The standard library has copy_backward, not copy with a tag, and count_if, rather than count with a predicate.

Conclusion:

LEWG should explore tags for allocator-aware containers, but that work should not block near-term enablement of efficient [std::]string builders.

6.2. Non-Lambda Approach

In [P1072R0] and [P1072R3] of this proposal, the authors considered a method resize_default_init / resize_uninitialized which left a default-initialized buffer accessible to users of the basic_string instance after the method returned. This method was rejected in [KOA], due to the weakened class invariants.

For illustration:

extern "C" {
  int compress(void* out, size_t* out_size, const void* in, size_t in_size);
  size_t compressBound(size_t bound);
}

std::string CompressWrapper(std::string_view input) {
    std::string compressed;
    // Compute upper limit of compressed input.
    size_t size = compressBound(input.size());

    // GOOD: No initialization
    compressed.resize_default_init(size);
    int ret = compress(&*compressed.begin(), &size, input.data(), input.size());
    if (ret != OK) {
      throw ...some error...
    }

    // Suppose size is the value of size before the call to compress and size'
    // is the value of size after the call to compress.
    //
    // If size' < size, then:
    //   std::cout << compressed[size' + 1]
    // ...triggers a read of uninitialized data.

    // Set actual size.
    compressed.erase(size);
    return compressed;
}

6.3. Standalone Type: storage_buffer

In [P1072R1], we considered storage_buffer, a standalone type providing a prepare method (similar to the resize_uninitialized method proposed here) and commit (to promise, under penalty of UB, that the buffer had been initialized).

At the [SAN] Meeting, this approach received support from LEWGI in light of the [post-Rapperswil] email review indicating support for a distinct type. This approach was rejected by the larger LEWG room in San Diego Meeting Diego.

The proposed type would be move-only.

std::string GeneratePattern(const std::string& pattern, size_t count) {
   std::storage_buffer<char> tmp;

   const auto step = pattern.size();
   // GOOD:  No initialization
   tmp.prepare(step * count + 1);
   for (size_t i = 0; i < count; i++) {
     // GOOD: No bookkeeping
     memcpy(tmp.data() + i * step, pattern.data(), step);
   }

   tmp.commit(step * count);
   return std::string(std::move(tmp));
}

For purposes of the container API, size() corresponds to the committed portion of the buffer. This leads to more consistency when working with (and explicitly copying to) other containers via iterators, for example:

std::storage_buffer<char> buf;
buf.prepare(100);
*fill in data*
buf.commit(50);

std::string a(buf.begin(), buf.end());
std::string b(std::move(buf));

assert(a == b);

Benefits:

• By being move-only, we would not have the risk of copying types with trap representations (thereby triggering UB).

• Uninitialized data is only accessible from the storage_buffer type. For an API working with basic_string, no invariants are weakened. Crossing an API boundary with a storage_buffer is much more obvious than a "basic_string with possibly uninitialized data." Uninitialized bytes (the promise made by commit) never escape into the valid range of basic_string.

Drawbacks:

• storage_buffer requires introducing an extra type to the standard library, even though its novel functionality (from string and vector) is limited to the initialization abilities.

• basic_string is often implemented with a short-string optimization (SSO) and an extra type would need to implement that (likely by additional checks when moving to/from the storage_buffer) that are often unneeded.

6.4. Externally-Allocated Buffer Injection

In [P1072R1], we considered that basic_string could "adopt" an externally allocator::allocate'd buffer. At the [SAN] Meeting, we concluded that this was:

• Not critical

• Not constrained in the future

• Overly constraining to implementers. Allowing users to provide their own buffers runs into the "offset problem". Consider an implementation that stores its size and capacity inline with its data, so sizeof(container) == sizeof(void*).

  class container {
    struct Rep {
      size_t size;
      size_t capacity;
    };
  
    Rep* rep_;
  };
  

  If using a Rep-style implementation, the mismatch in offsets requires an O(N) move to shift the contents into place and trigger a possible reallocation.

• Introducing new pitfalls. It would be easy to mix new[] and allocator::allocate inadvertently.

7. Related Work

7.1. Google

Google has a local extension to basic_string called resize_uninitialized which is wrapped as STLStringResizeUninitialized.

• [Abseil] uses this to avoid bookkeeping overheads in StrAppend and StrCat.

• [Snappy]

  • In decompression, the final size of the output buffer is known before the contents are ready.

  • During compression, an upperbound on the final compressed size is known, allowing data to be efficiently added to the output buffer (eliding append's checks) and the string to be shrunk to its final, correct size.

• [Protobuf] avoids extraneous copies or initialization when the size is known before data is available (especially during parsing or serialization).

7.2. MongoDB

MongoDB has a string builder that could have been implemented in terms of basic_string as a return value. However, as explained by Mathias Stearn, zero initialization was measured and was too costly. Instead a custom string builder type is used:

E.g.: https://github.com/mongodb/mongo/blob/master/src/mongo/db/fts/unicode/string.h

/**
 * Strips diacritics and case-folds the utf8 input string, as needed to support
 * options.
 *
 * The options field specifies what operations to *skip*, so kCaseSensitive
 * means to skip case folding and kDiacriticSensitive means to skip diacritic
 * striping. If both flags are specified, the input utf8 StringData is returned
 * directly without any processing or copying.
 *
 * If processing is performed, the returned StringData will be placed in
 * buffer.  buffer’s contents (if any) will be replaced. Since we may return
 * the input unmodified the returned StringData’s lifetime is the shorter of
 * the input utf8 and the next modification to buffer. The input utf8 must not
 * point into buffer.
 */
static StringData caseFoldAndStripDiacritics(StackBufBuilder* buffer,
                                             StringData utf8,
                                             SubstrMatchOptions options,
                                             CaseFoldMode mode);

(Comments re-wrapped.)

7.3. VMware

VMware has an internal string builder implementation that avoids std::string due, in part, to reserve's zero-writing behavior. This is similar in spirit to the MongoDB example above.

7.4. Discussion on std-proposals

This topic was discussed in 2013 on std-proposals in a thread titled "Add basic_string::resize_uninitialized (or a similar mechanism)":
https://groups.google.com/a/isocpp.org/forum/#!topic/std-proposals/XIO4KbBTxl0

7.5. DynamicBuffer

The [N4734] (the Networking TS) has dynamic buffer types.

7.6. P1020R1

See also [P1020R1] "Smart pointer creation functions for default initialization". Adopted in San Diego.

7.7. Boost

Boost provides a related optimization for vector-like containers, introduced in [SVN r85964] by Ion Gaztañaga.

E.g.: boost/container/vector.hpp:

//! <b>Effects</b>: Constructs a vector that will use a copy of allocator a
//!   and inserts n default initialized values.
//!
//! <b>Throws</b>: If allocator_type’s allocation
//!   throws or T’s default initialization throws.
//!
//! <b>Complexity</b>: Linear to n.
//!
//! <b>Note</b>: Non-standard extension
vector(size_type n, default_init_t);
vector(size_type n, default_init_t, const allocator_type &a)
...
void resize(size_type new_size, default_init_t);
...

These optimizations are also supported in Boost Container’s small_vector, static_vector, deque, stable_vector, and string.

7.8. Thrust

The Thrust library has "a RAII-type thrust::detail::temporary_array which has a vector-like interface and a constructor with a tag parameter that indicates its elements should not be initialized." - [Bryce Adelstein Lelbach].

E.g. thrust/thrust/detail/temporary_array.inl:

template<typename T, typename TemporaryArray, typename Size>
__host__ __device__
typename thrust::detail::disable_if<
  avoid_initialization<T>::value
>::type
  construct_values(TemporaryArray &a,
                   Size n)
{
  a.default_construct_n(a.begin(), n);
} // end construct_values()

8. Wording

Wording is relative to [N4892].

Motivation for some of these edits can be found in § 5.2 Allocator Interaction.

8.1. [version.syn]

In [version.syn], add:

#define __cpp_lib_string_resize_and_overwrite YYYYMML  // also in <string>

Adjust the placeholder value as needed so as to denote this proposal’s date of adoption.

8.2. [basic.string.general]

In [basic.string.general], in the synopsis, add resize_and_overwrite:

...
    // 21.3.3.5, capacity
    constexpr size_type size() const noexcept;
    constexpr size_type length() const noexcept;
    constexpr size_type max_size() const noexcept;
    constexpr void resize(size_type n, charT c);
    constexpr void resize(size_type n);
    template<class Operation>
    constexpr void resize_and_overwrite(size_type n, Operation op);
    constexpr size_type capacity() const noexcept;
    constexpr void reserve(size_type res_arg);
    constexpr void shrink_to_fit();
    constexpr void clear() noexcept;
    [[nodiscard]] constexpr bool empty() const noexcept;

8.3. [string.require]

Add a note to [string.require]:

3. In every specialization basic_string<charT, traits, Allocator>, the type allocator_traits<Allocator>::value_type shall name the same type as charT. Every object of type basic_string<charT, traits, Allocator> uses an object of type Allocator to allocate and free storage for the contained charT objects as needed. The Allocator object used is obtained as described in 22.2.1. In every specialization basic_string<charT, traits, Allocator>, the type traits shall meet the character traits requirements (21.2).

   [Note 1: Every specialization basic_string<charT, traits, Allocator> is an allocator-aware container, but does not use the allocator’s construct and destroy member functions. ([container.requirements.general]). — end note]

   [*Note 1 2 :* The program is ill-formed if traits::char_type is not the same type as charT. — end note]

4. References, pointers, and iterators referring to the elements of a basic_string sequence may be invalidated by the following uses of that basic_string object:

8.4. [string.capacity]

Note that [string.require] p4 has blanket wording for mutating operations, and [LWG2414] introduces blanket wording for reentrancy.

In [string.capacity]:

constexpr void resize(size_type n, charT c);

5. Effects: Alters the value of *this as follows:
   • — If n <= size(), erases the last size() - n elements.
   • — If n > size(), appends n - size() copies of c.

constexpr void resize(size_type n);

6. Effects: Equivalent to resize(n, charT()).

template<class Operation>
constexpr void resize_and_overwrite(size_type n, Operation op);

7. Let
   • — o = size() before the call to resize_and_overwrite.
   • — k be min(o, n).
   • — p be a charT*, such that the range [p, p + n] is valid and this->compare(0, k, p, k) == 0 is true before the call. The values in the range [p + k, p + n] may be indeterminate [basic.indet].
   • — OP be the expresion std::move(op)(p, n).
   • — r = OP.
8. Mandates: OP has an integer-like type ([iterator.concept.winc]).
9. Preconditions:
   • — OP does not throw an exception or modify p or n.
   • — r ≥ 0.
   • — r ≤ n.
   • — After evaluating OP there are no indeterminate values in the range [p, p + r).
10. Effects: Evaluates OP, replaces the contents of *this with [p, p + r), and invalidates all pointers and references to the range [p, p + n].
11. Recommended practice: Implementations should avoid unnecessary copies and allocations by, for example, making p a pointer into internal storage and by restoring *(p + r) to charT() after evaluating OP.

constexpr size_type capacity() const noexcept;

...

8.5. [container.requirements.general]

In [container.requirements.general] p3 provide an explicit exception for basic_string. While we are here, switch to "allocator-aware" and "elements" terminology.

3. For the components affected by this subclause that declare an allocator_type, objects stored in these components shall be constructed Allocator-aware containers (Table 76) other than basic_string construct elements using the function allocator_traits<allocator_type>::rebind_traits<U>::construct and destroyed destroy elements using the function allocator_traits<allocator_type>::rebind_traits<U>::destroy [allocator.traits.members] (20.10.8.3), where U is either allocator_type::value_type or an internal type used by the container. These functions are called only for the container’s element type, not for internal types used by the container.

We provide a similar exception for basic_string in p16:

16. Given an allocator type A and given a container type X having a value_type identical to T and an allocator_type identical to allocator_traits<A>::rebind_alloc<T> and given an lvalue m of type A, a pointer p of type T*, an expression v of type (possibly const) T, and an rvalue rv of type T, the following terms are defined. If X is not allocator-aware or is a specialization of basic_string , the terms below are defined as if A were allocator<T> — no allocator object needs to be created and user specializations of allocator<T> are not instantiated:

9. History

9.1. R9 → R10

• In [string.capacity]

  • Wrapped op in std::move and introduced the pseudo macro OP.

  • Add Precondition that OP not modify p or n.

  • Removed requirements for allocation and capacity (added in R9).

9.2. R8 → R9

• Rebased on [N4892].

• In [string.capacity]

  • Added a pointer to [LWG2414].

  • Reworded in terms of Let, Mandates, Preconditions, Effects, and Recommended practice.

  • Added requirements for allocation and capacity.

• In [container.requirements.general]

  • Use simple (wording) exceptions for basic_string.

  • Use "allocator-aware".

  • Use "element" instead of "object".

• Add only Note in [string.require], removing normative changes.

• Wording typos: typename -> class.

• Fix markdown glitch in R8 history.

9.3. R7 → R8

LEWG reviewed R7 via [April2021Telecon]

POLL: Modify P1072R7 (basic_string::resize_and_overwrite) by adding a feature test macro, and send revised paper to electronic polling to be forwarded to LWG with ship vehicle C++23, and priority B2.

SF	F	N	A	SA
9	11	1	0	0

Attendance: 31

Number of Authors: 2

Author Position: Strongly Favor

Outcome: Strong consensus in favor of sending to electronic polling.

LEWG did electronic polling via [D2384R0]

Poll 7: Modify P1072R7 (basic_string::resize_and_overwrite) by adding a feature test macro, and then send the revised paper to Library Working Group for C++23, classified as an improvement of an existing feature ([P0592R4] bucket 2 item).

SF	F	N	A	SA
17	8	0	1	1

Outcome: Consensus in favor.

• Added LEWG poll from [April2021Telecon]

• Added feature test macro.

• Fixed ambiguous indentation in string.capacity Effects.

• Further fixes for CompressWrapper example.

• Rebased on [N4885].

• Added LEWG electronic polling results from [D2384R0].

9.4. R6 → R7

• Rebased on [N4878].

• Fixed CompressWrapper example.

• Allowed writing one past the end.

• Reorganized § 5.3 Undefined Behavior.

9.5. R5 → R6

LEWG reviewed R5 via [LEWGNovTelecon].

POLL: resize_default_init should be able to work in constexpr context.

No objection to unanimous consent. Attendance: 23

POLL: We prefer UB over throwing an exception if the operation reports it wrote more bytes than it has access to.

No objection to unanimous consent. Attendance: 21

POLL: We want to rename resize_default_init for consistency, in a mailing list review.

SF	F	N	A	SA
3	12	0	1	0

Modifications since R5:

• Indicated poll outcomes for UB when op reports an invalid value.

• Renamed to resize_and_overwrite. This is based on naming discussions for std::make_unique_default_init being ultimately renamed to std::make_unique_for_overwrite, but differs slightly because the memory accessible has been overwritten. Overwriting the buffer is an integral part of the operation performed.

• Applied constexpr

9.6. R4 → R5

A draft of this revision was presented to LEWG at the [Cologne] meeting.

Forward to LWG for C++23

SF	F	N	A	SA
10	5	1	0	0

• Rebased on [N4830].

• Proposed UB instead of throwing std::range_error.

9.7. R3 → R4

• Applied feedback from the [KOA] meeting.

• Moved to using a callback routine, rather than leaving invariants weakened from the time resize_default_init returned until values in the buffer were assigned.

9.8. R2 → R3

• Applied Jonathan Wakely’s editorial comments on § 8 Wording.

• Rebased on [N4791].

• Editorial changes to § 1 Motivation and § 6.1 Tag Type to support our design choice.

• Added the reference to [LIBC++] in § 3 Implementation.

9.9. R1 → R2

Applied feedback from [SAN] Meeting reviews.

• Reverted design to "option A" proposed in [P1072R0].

• Switched from resize_uninitialized to resize_default_init.

• Added discussion of alternatives considered.

• Specified allocator interaction.

• Added wording.

9.10. R0 → R1

Applied feedback from LEWG [post-Rapperswil] Email Review:

• Shifted to a new vocabulary types: storage_buffer / storage_node

  • Added presentation of storage_buffer as a new container type

  • Added presentation of storage_node as a node-like type

• Added discussion of design and implementation considerations.

• Most of [P1010R1] Was merged into this paper.

10. Acknowledgments

Thanks go to Arthur O’Dwyer for help with wording and proof reading, to Jonathan Wakely for hunting down the language that makes basic_string allocator-aware, and to Glen Fernandes, Corentin Jabot, Billy O’Neal, and Mathias Stearn for design discussion. Special thanks to Eric Fiselier for providing the implmentation.