async_scope – Creating scopes for non-sequential concurrency

Document #: P3149R3
Date: 2024-05-21
Project: Programming Language C++
Audience: SG1 Parallelism and Concurrency
LEWG Library Evolution
Reply-to: Ian Petersen
<>
Ján Ondrušek
<>
Jessica Wong
<>
Kirk Shoop
<>
Lee Howes
<>
Lucian Radu Teodorescu
<>

Contents

1 Changes

1.1 R3

1.2 R2

1.3 R1

1.4 R0

2 Introduction

[P2300R7] lays the groundwork for writing structured concurrent programs in C++ but it leaves three important scenarios under- or unaddressed:

  1. progressively structuring an existing, unstructured concurrent program;
  2. starting a dynamic number of parallel tasks without “losing track” of them; and
  3. opting in to eager execution of sender-shaped work when appropriate.

This paper describes the utilities needed to address the above scenarios within the following constraints:

The proposed solution comes in the following parts:

2.1 Implementation experience

The general concept of an async scope to manage work has been deployed broadly at Meta. Code written with Folly’s coroutine library, [folly::coro], uses [folly::coro::AsyncScope] to safely launch awaitables. Most code written with Unifex, an implementation of an earlier version of the Sender/Receiver model proposed in [P2300R7], uses [unifex::v1::async_scope], although experience with the v1 design led to the creation of [unifex::v2::async_scope], which has a smaller interface and a cleaner definition of responsibility.

As an early adopter of Unifex, [rsys] (Meta’s cross-platform voip client library) became the entry point for structured concurrency in mobile code at Meta. We originally built rsys with an unstructured asynchrony model built around posting callbacks to threads in order to optimize for binary size. However, this came at the expense of developer velocity due to the increasing cost of debugging deadlocks and crashes resulting from race conditions.

We decided to adopt Unifex and refactor towards a more structured architecture to address these problems systematically. Converting an unstructured production codebase to a structured one is such a large project that it needs to be done in phases. As we began to convert callbacks to senders/tasks, we quickly realized that we needed a safe place to start structured asynchronous work in an unstructured environment. We addressed this need with unifex::v1::async_scope paired with an executor to address a recurring pattern:

Before
After 
// Abstraction for thread that has the ability
// to execute units of work.
class Executor {
 public:
  virtual void add(Func function) noexcept = 0;
};

// Example class
class Foo {
  std::shared_ptr<Executor> exec_;

 public:
  void doSomething() {
     auto asyncWork = [&]() {
       // do something
     };
     exec_->add(asyncWork);
  }
};
 
// Utility class for executing async work on an
// async_scope and on the provided executor
class ExecutorAsyncScopePair {
  unifex::v1::async_scope scope_;
  ExecutorScheduler exec_

 public:
  void add(Func func) {
    scope_.detached_spawn_call_on(
      exec_, func);
  }

  auto cleanup() {
    return scope_.cleanup();
  }
};

// Example class
class Foo {
 std::shared_ptr<ExecutorAsyncScopePair> exec_;

 public:
  ~Foo() {
    sync_wait(exec_->cleanup());
  }

  void doSomething() {
    auto asyncWork = [&]() {
      // do something
    };


   exec_->add(asyncWork);
  }
};

This broadly worked but we discovered that the above design coupled with the v1 API allowed for too many redundancies and conflated too many responsibilities (scoping async work, associating work with a stop source, and transferring scoped work to a new scheduler).

We learned that making each component own a distinct responsibility will minimize the confusion and increase the structured concurrency adoption rate. The above example was an intuitive use of async_scope because the concept of a “scoped executor” was familiar to many engineers and is a popular async pattern in other programming languages. However, the above design abstracted away some of the APIs in async_scope that explicitly asked for a scheduler, which would have helped challenge the assumption engineers made about async_scope being an instance of a “scoped executor”.

Cancellation was an unfamiliar topic for engineers within the context of asynchronous programming. The v1::async_scope provided both cleanup() and complete() to give engineers the freedom to decide between canceling work or waiting for work to finish. The different nuances on when this should happen and how it happens ended up being an obstacle that engineers didn’t want to deal with.

Over time, we also found redundancies in the way v1::async_scope and other algorithms were implemented and identified other use cases that could benefit from a different kind of async scope. This motivated us to create v2::async_scope which only has one responsibility (scope), and nest which helped us improve maintainability and flexibility of Unifex.

The unstructured nature of cleanup()/complete() in a partially structured codebase introduced deadlocks when engineers nested the cleanup()/complete() sender in the scope being joined. This risk of deadlock remains with v2::async_scope::join() however, we do think this risk can be managed and is worth the tradeoff in exchange for a more coherent architecture that has fewer crashes. For example, we have experienced a significant reduction in these types of deadlocks once engineers understood that join() is a destructor-like operation that needs to be run only by the scope’s owner. Since there is no language support to manage async lifetimes automatically, this insight was key in preventing these types of deadlocks. Although this breakthrough was a result of strong guidance from experts, we believe that the simpler design of v2::async_scope would make this a little easier.

We strongly believe that async_scope was necessary for making structured concurrency possible within rsys, and we believe that the improvements we made with v2::async_scope will make the adoption of P2300 more accessible.

3 Motivation

3.1 Motivating example

Let us assume the following code:

namespace ex = std::execution;

struct work_context;
struct work_item;
void do_work(work_context&, work_item*);
std::vector<work_item*> get_work_items();

int main() {
    static_thread_pool my_pool{8};
    work_context ctx; // create a global context for the application

    std::vector<work_item*> items = get_work_items();
    for (auto item : items) {
        // Spawn some work dynamically
        ex::sender auto snd = ex::transfer_just(my_pool.get_scheduler(), item) |
                              ex::then([&](work_item* item) { do_work(ctx, item); });
        ex::start_detached(std::move(snd));
    }
    // `ctx` and `my_pool` are destroyed
}

In this example we are creating parallel work based on the given input vector. All the work will be spawned on the local static_thread_pool object, and will use a shared work_context object.

Because the number of work items is dynamic, one is forced to use start_detached() from [P2300R7] (or something equivalent) to dynamically spawn work. [P2300R7] doesn’t provide any facilities to spawn dynamic work and return a sender (i.e., something like when_all but with a dynamic number of input senders).

Using start_detached() here follows the fire-and-forget style, meaning that we have no control over, or awareness of, the completion of the async work that is being spawned.

At the end of the function, we are destroying the work_context and the static_thread_pool. But at that point, we don’t know whether all the spawned async work has completed. If any of the async work is incomplete, this might lead to crashes.

[P2300R7] doesn’t give us out-of-the-box facilities to use in solving these types of problems.

This paper proposes the counting_scope and [P3296R0]’s let_with_async_scope facilities that would help us avoid the invalid behavior. With counting_scope, one might write safe code this way:

namespace ex = std::execution;

struct work_context;
struct work_item;
void do_work(work_context&, work_item*);
std::vector<work_item*> get_work_items();

int main() {
    static_thread_pool my_pool{8};
    work_context ctx;         // create a global context for the application
    ex::counting_scope scope; // create this *after* the resources it protects

    // make sure we always join
    unifex:scope_guard join = [&]() noexcept {
      // wait for all nested work to finish
      this_thread::sync_wait(scope.join()); // NEW!
    };

    std::vector<work_item*> items = get_work_items();
    for (auto item : items) {
      // Spawn some work dynamically
      ex::sender auto snd = ex::transfer_just(my_pool.get_scheduler(), item) |
                            ex::then([&](work_item* item) { do_work(ctx, item); });

      // start `snd` as before, but associate the spawned work with `scope` so that it can
      // be awaited before destroying the resources referenced by the work (i.e. `my_pool`
      // and `ctx`)
      ex::spawn(std::move(snd), scope.get_token()); // NEW!
    }

    // `ctx` and `my_pool` are destroyed *after* they are no longer referenced
}

With [P3296R0]’s let_with_async_scope, one might write safe code this way:

namespace ex = std::execution;

struct work_context;
struct work_item;
void do_work(work_context&, work_item*);
std::vector<work_item*> get_work_items();

int main() {
  static_thread_pool my_pool{8};
  work_context ctx;         // create a global context for the application

  this_thread::sync_wait(ex::let_with_async_scope(ex::just(get_work_items()), [&](auto scope) {
    for (auto item : items) {
      // Spawn some work dynamically
      ex::sender auto snd = ex::transfer_just(my_pool.get_scheduler(), item) |
                            ex::then([&](work_item* item) { do_work(ctx, item); });

      // start `snd` as before, but associate the spawned work with `scope` so that it can
      // be awaited before destroying the resources referenced by the work (i.e. `my_pool`
      // and `ctx`)
      ex::spawn(std::move(snd), scope); // NEW!
    }
    return just();
  }));

  // `ctx` and `my_pool` are destroyed *after* they are no longer referenced
}

Simplifying the above into something that fits in a Tony Table to highlight the differences gives us:

Before
With counting_scope
With let_with_async_scope 
namespace ex = std::execution;

struct context;
ex::sender auto work(const context&);

int main() {
  context ctx;

  ex::sender auto snd = work(ctx);

  // fire and forget
  ex::start_detached(std::move(snd));

  // `ctx` is destroyed, perhaps before
  // `snd` is done
}
 
namespace ex = std::execution;

struct context;
ex::sender auto work(const context&);

int main() {
  context ctx;
  ex::counting_scope scope;

  ex::sender auto snd = work(ctx);

  try { 
      // fire, but don't forget
      ex::spawn(std::move(snd), scope.get_token());
  } catch (...) {
      // do something to handle exception
  }

  // wait for all work nested within scope
  // to finish
  this_thread::sync_wait(scope.join());

  // `ctx` is destroyed once nothing
  // references it
}
 
namespace ex = std::execution;

struct context;
ex::sender auto work(const context&);

int main() {
  context ctx;
  this_thread::sync_wait(ex::just()
      | ex::let_with_async_scope([&](auto scope) {
        ex::sender auto snd = work(ctx);

        // fire, but don't forget
        ex::spawn(std::move(snd), scope.get_token());
      }));

  // `ctx` is destroyed once nothing
  // references it
}

Please see below for more examples.

3.2 counting_scope and let_with_async_scope are a step forward towards Structured Concurrency

Structured Programming [Dahl72] transformed the software world by making it easier to reason about the code, and build large software from simpler constructs. We want to achieve the same effect on concurrent programming by ensuring that we structure our concurrent code. [P2300R7] makes a big step in that direction, but, by itself, it doesn’t fully realize the principles of Structured Programming. More specifically, it doesn’t always ensure that we can apply the single entry, single exit point principle.

The start_detached sender algorithm fails this principle by behaving like a GOTO instruction. By calling start_detached we essentially continue in two places: in the same function, and on different thread that executes the given work. Moreover, the lifetime of the work started by start_detached cannot be bound to the local context. This will prevent local reasoning, which will make the program harder to understand.

To properly structure our concurrency, we need an abstraction that ensures that all async work that is spawned has a defined, observable, and controllable lifetime. This is the goal of counting_scope and let_with_async_scope.

4 Examples of use

4.1 Spawning work from within a task

Use let_with_async_scope in combination with a system_context from [P2079R2] to spawn work from within a task:

namespace ex = std::execution;

int main() {
    ex::system_context ctx;
    int result = 0;

    ex::scheduler auto sch = ctx.scheduler();

    ex::sender auto val = ex::just()
        | ex::let_with_async_scope([sch](ex::async_scope_token auto scope) {
          int val = 13;

          auto print_sender = ex::just()
              | ex::then([val] {
                std::cout << "Hello world! Have an int with value: " << val << "\n";
              });

          // spawn the print sender on sch
          //
          // NOTE: if spawn throws, let_with_async_scope will capture the exception
          //       and propagate it through its set_error completion
          ex::spawn(ex::on(sch, std::move(print_sender)), scope);

          return ex::just(val);
        }))
        | ex::then([&result](auto val) { result = val });

    this_thread::sync_wait(ex::on(sch, std::move(val)));

    std::cout << "Result: " << result << "\n";
}

// 'let_with_async_scope' ensures that, if all work is completed successfully, the result will be 13
// `sync_wait` will throw whatever exception is thrown by the callable passed to `let_with_async_scope`

4.2 Starting work nested within a framework

In this example we use the counting_scope within a class to start work when the object receives a message and to wait for that work to complete before closing.

namespace ex = std::execution;

struct my_window {
    class close_message {};

    ex::sender auto some_work(int message);

    ex::sender auto some_work(close_message message);

    void onMessage(int i) {
        ++count;
        ex::spawn(ex::on(sch, some_work(i)), scope);
    }

    void onClickClose() {
        ++count;
        ex::spawn(ex::on(sch, some_work(close_message{})), scope);
    }

    my_window(ex::system_scheduler sch, ex::counting_scope::token scope)
      : sch(sch), scope(scope) {
      // register this window with the windowing framework somehow so that
      // it starts receiving calls to onClickClose() and onMessage()
    }

    ex::system_scheduler sch;
    ex::counting_scope::token scope;
    int count{0};
};

int main() {
    // keep track of all spawned work
    ex::counting_scope scope;
    ex::system_context ctx;
    try {
        my_window window{ctx.get_scheduler(), scope.get_token()};
    } catch (...) {
      // do something with exception
    }
    // wait for all work nested within scope to finish
    this_thread::sync_wait(scope.join());
    // all resources are now safe to destroy
    return window.count;
}

4.3 Starting parallel work

In this example we use let_with_async_scope to construct an algorithm that performs parallel work. Here foo launches 100 tasks that concurrently run on some scheduler provided to foo, through its connected receiver, and then the tasks are asynchronously joined. This structure emulates how we might build a parallel algorithm where each some_work might be operating on a fragment of data.

namespace ex = std::execution;

ex::sender auto some_work(int work_index);

ex::sender auto foo(ex::scheduler auto sch) {
  return ex::just()
      | ex::let_with_async_scope([sch](ex::async_scope_token auto scope) {
        return ex::schedule(sch)
            | ex::then([] {
              std::cout << "Before tasks launch\n";
            })
            | ex::then([=] {
              // Create parallel work
              for (int i = 0; i < 100; ++i) {
                // NOTE: if spawn() throws, the exception will be propagated as the
                //       result of let_with_async_scope through its set_error completion
                ex::spawn(ex::on(sch, some_work(i)), scope);
              }
            });
      })
      | ex::then([] { std::cout << "After tasks complete successfully\n"; });
}

4.4 Listener loop in an HTTP server

This example shows how one can write the listener loop in an HTTP server, with the help of coroutines. The HTTP server will continuously accept new connection and start work to handle the requests coming on the new connections. While the listening activity is bound in the scope of the loop, the lifetime of handling requests may exceed the scope of the loop. We use counting_scope to limit the lifetime of the request handling without blocking the acceptance of new requests.

namespace ex = std::execution;

task<size_t> listener(int port, io_context& ctx, static_thread_pool& pool) {
    size_t count{0};
    listening_socket listen_sock{port};

    co_await ex::let_with_async_scope(
        ex::just(), [&](ex::async_scope_token auto scope) -> task<void> {
          while (!ctx.is_stopped()) {
            // Accept a new connection
            connection conn = co_await async_accept(ctx, listen_sock);
            count++;

            // Create work to handle the connection in the scope of `work_scope`
            conn_data data{std::move(conn), ctx, pool};
            ex::sender auto snd = ex::just(std::move(data))
                | ex::let_value([](auto& data) {
                  return handle_connection(data);
                });

            ex::spawn(std::move(snd), scope);
          }
        });

    // At this point, all the request handling is complete
    co_return count;
}

[libunifex] has a very similar example HTTP server at [io_uring HTTP server] that compiles and runs on Linux-based machines with io_uring support.

4.5 Pluggable functionality through composition

This example is based on real code in rsys, but it reduces the real code to slideware and ports it from Unifex to the proposed std::execution equivalents. The central abstraction in rsys is a Call, but each integration of rsys has different needs so the set of features supported by a Call varies with the build configuration. We support this configurability by exposing the equivalent of the following method on the Call class:

template <typename Feature>
Handle<Feature> Call::get();

and it’s used like this in app-layer code:

unifex::task<void> maybeToggleCamera(Call& call) {
  Handle<Camera> camera = call.get<Camera>();

  if (camera) {
    co_await camera->toggle();
  }
}

A Handle<Feature> is effectively a part-owner of the Call it came from.

The team that maintains rsys and the teams that use rsys are, unsurprisingly, different teams so rsys has to be designed to solve organizational problems as well as technical problems. One relevant design decision the rsys team made is that it is safe to keep using a Handle<Feature> after the end of its Call’s lifetime; this choice adds some complexity to the design of Call and its various features but it also simplifies the support relationship between the rsys team and its many partner teams because it eliminates many crash-at-shutdown bugs.

namespace rsys {

class Call {
 public:
  unifex::nothrow_task<void> destroy() noexcept {
    // first, close the scope to new work and wait for existing work to finish
    scope_->close();
    co_await scope_->join();

    // other clean-up tasks here
  }

  template <typename Feature>
  Handle<Feature> get() noexcept;

 private:
  // an async scope shared between a call and its features
  std::shared_ptr<std::execution::counting_scope> scope_;
  // each call has its own set of threads
  ExecutionContext context_;

  // the set of features this call supports
  FeatureBag features_;
};

class Camera {
 public:
  std::execution::sender auto toggle() {
    namespace ex = std::execution;

    return ex::just() | ex::let_value([this]() {
      // this callable is only invoked if the Call's scope is in
      // the open or unused state when nest() is invoked, making
      // it safe to assume here that:
      //
      //  - scheduler_ is not a dangling reference to the call's
      //    execution context
      //  - Call::destroy() has not progressed past starting the
      //    join-sender so all the resources owned by the call
      //    are still valid
      //
      // if the nest() attempt fails because the join-sender has
      // started (or even if the Call has been completely destroyed)
      // then the sender returned from toggle() will safely do
      // nothing before completing with set_stopped()

      return ex::schedule(scheduler_) | ex::then([this]() {
        // toggle the camera
      });
    }) | ex::nest(callScope_->get_token());
  }

 private:
  // a copy of this camera's Call's scope_ member
  std::shared_ptr<ex::counting_scope> callScope_;
  // a scheduler that refers to this camera's Call's ExecutionContext
  Scheduler scheduler_;
};

}

4.6 Recursively spawning work until completion

Below are three ways you could recursively spawn work on a scope using let_with_async_scope or counting_scope.

4.6.1 let_with_async_scope with spawn()

struct tree {
  std::unique_ptr<tree> left;
  std::unique_ptr<tree> right;
  int data;
};

auto process(ex::scheduler auto sch, auto scope, tree& t) noexcept {
  return ex::schedule(sch) | then([sch, &]() {
    if (t.left)
      ex::spawn(process(sch, scope, t.left.get()), scope);
    if (t.right)
      ex::spawn(process(sch, scope, t.right.get()), scope);
    do_stuff(t.data);
  }) | ex::let_error([](auto& e) {
    // log error
    return just();
  });
}

int main() {
  ex::scheduler sch;
  tree t = make_tree();
  // let_with_async_scope will ensure all new work will be spawned on the
  // scope and will not be joined until all work is finished.
  // NOTE: Exceptions will not be surfaced to let_with_async_scope; exceptions
  // will be handled by let_error instead.
  this_thread::sync_wait(ex::let_with_async_scope([&, sch](auto scope) {
    return process(sch, scope, t);
  }));
}

4.6.2 let_with_async_scope with spawn_future()

struct tree {
  std::unique_ptr<tree> left;
  std::unique_ptr<tree> right;
  int data;
};

auto process(ex::scheduler auto sch, auto scope, tree& t) {
    return ex::schedule(sch) | ex::let_value([sch, &]() {
      unifex::any_sender_of<> leftFut = ex::just();
      unifex::any_sender_of<> rightFut = ex::just();
      if (t.left) {  
         leftFut = ex::spawn_future(
         scope, process(sch, scope, t.left.get()));
      }

      if (t.right) { 
         rightFut = ex::spawn_future(
         scope, process(sch, scope, t.right.get()));
      }

      do_stuff(t.data);
      return ex::when_all(leftFut, rightFut) | ex::then([](auto&&...) noexcept {});
    });
}

int main() {
    ex::scheduler sch;
    tree t = make_tree();
    // let_with_async_scope will ensure all new work will be spawned on the
    // scope and will not be joined until all work is finished
    // NOTE: Exceptions will be surfaced to let_with_async_scope which will
    // call set_error with the exception_ptr
    this_thread::sync_wait(ex::let_with_async_scope([&, sch](auto scope) { 
        return process(sch, scope, t);
    }));
}

4.6.3 counting_scope

struct tree {
  std::unique_ptr<tree> left;
  std::unique_ptr<tree> right;
  int data;
};

auto process(ex::counting_scope_token scope, ex::scheduler auto sch, tree& t) noexcept {
  return ex::schedule(sch) | ex::then([sch, &]() noexcept {
    if (t.left)
       ex::spawn(process(sch, t.left.get()), scope);

    if (t.right)
       ex::spawn(process(sch, t.right.get()), scope);

     do_stuff(t.data);
   }) | ex::let_error([](auto& e) {
       // log error
       return just();
   });
}

int main() {
  ex::scheduler sch;
  tree t = make_tree();
  ex::counting_scope scope;
  this_thread::sync_wait(process(scope.get_token(), sch, t));
  this_thread::sync_wait(scope.join());
}

5 Async Scope, usage guide

An async scope is a type that implements a “bookkeeping policy” for senders that have been nest()ed within the scope. Depending on the policy, different guarantees can be provided in terms of the lifetimes of the scope and any nested senders. The counting_scope described in this paper defines a policy that has proven useful while progressively adding structure to existing, unstructured code at Meta, but other useful policies are possible. By defining spawn() and spawn_future() in terms of the more fundamental nest(), and leaving the definition of nest() to the scope, this paper’s design leaves the set of policies open to extension by user code or future standards.

An async scope’s implementation of nest():

More on these items can be found below in the sections below.

5.1 Definitions

namespace { // exposition-only

struct scope-token { // exposition-only
  template <sender Sender>
  sender auto nest(Sender&& s)
      noexcept(is_nothrow_constructible_v<remove_cvref_t<Sender>, Sender>);
};

// TODO: let_with_async_scope will store a copy of the callable and
//       invoke that copy, so perhaps the callability should be assessed
//       on a mutable lvalue reference-qualified type?
template <class Callable>
concept scoped-sender-factory = // exposition-only
    std::invocable<Callable, scope-token> &&
    sender<std::invoke_result_t<Callable, scope-token>>;

template <class Env>
struct spawn-env; // exposition-only

template <class Env>
struct spawn-receiver { // exposition-only
    void set_value() noexcept;
    void set_stopped() noexcept;

    spawn-env<Env> get_env() const noexcept;
};

template <class Env>
struct future-env; // exposition-only

template <valid-completion-signatures Sigs>
struct future-sender; // exposition-only

template <sender Sender, class Env>
using future-sender-t = // exposition-only
    future-sender<completion_signatures_of_t<Sender, future-env<Env>>>;

}

template <class Token, class Sender>
concept async_scope_token =
    copyable<Token> &&
    is_nothrow_move_constructible_v<Token> &&
    is_nothrow_move_assignable_v<Token> &&
    is_nothrow_copy_constructible_v<Token> &&
    is_nothrow_copy_assignable_v<Token> &&
    sender<Sender> &&
    requires(Token token, Sender&& snd) {
      { token.nest(std::forward<Sender>(snd)) } -> sender;
    };

template <class Scope>
concept async_scope =
    requires(Scope scope) {
      { scope.get_token() } -> async_scope_token<decltype(just())>;
      { scope.join() } -> sender;
    };

template <sender Sender, async_scope_token<Sender> Token>
auto nest(Sender&& snd, Token token) noexcept(noexcept(token.nest(std::forward<Sender>(snd))))
    -> decltype(token.nest(std::forward<Sender>(snd)));

template <sender Sender, async_scope_token<Sender> Token, class Env = empty_env>
  requires sender_to<Sender, spawn-receiver<Env>>
void spawn(Sender&& snd, Token token, Env env = {});

template <sender Sender, async_scope_token<Sender> Token, class Env = empty_env>
future-sender-t<Sender, Env> spawn_future(Sender&& snd, Token token, Env env = {});

template <scoped-sender-factory Callable>
sender auto let_with_async_scope(Callable&& callable)
    noexcept(std::is_nothrow_constructible_v<std::decay_t<Callable>, Callable>);

struct simple_counting_scope {
    simple_counting_scope() noexcept;
    ~simple_counting_scope();

    // simple_counting_scope is immovable and uncopyable
    simple_counting_scope(const simple_counting_scope&) = delete;
    simple_counting_scope(simple_counting_scope&&) = delete;
    simple_counting_scope& operator=(const simple_counting_scope&) = delete;
    simple_counting_scope& operator=(simple_counting_scope&&) = delete;

    template <sender S>
    struct nest-sender; // exposition-only

    struct token {
      template <sender S>
      [[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const
          noexcept(std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

     private:
      friend simple_counting_scope;

      token(simple_counting_scope* s) noexcept;

      simple_counting_scope* scope; // exposition-only
    };

    token get_token() noexcept;

    void close() noexcept;

    struct join-sender; // exposition-only

    [[nodiscard]] join-sender join() noexcept;
};

struct counting_scope {
    counting_scope() noexcept;
    ~counting_scope();

    // counting_scope is immovable and uncopyable
    counting_scope(const counting_scope&) = delete;
    counting_scope(counting_scope&&) = delete;
    counting_scope& operator=(const counting_scope&) = delete;
    counting_scope& operator=(counting_scope&&) = delete;

    template <sender S>
    struct nest-sender; // exposition-only

    struct token {
      template <sender S>
      [[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const
          noexcept(std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

     private:
      friend counting_scope;

      token(counting_scope* s) noexcept;

      counting_scope* scope; // exposition-only
    };

    token get_token() noexcept;

    void close() noexcept;

    void request_stop() noexcept;

    struct join-sender; // exposition-only

    [[nodiscard]] join-sender join() noexcept;
};

5.2 execution::async_scope_token

template <class Token, class Sender>
concept async_scope_token =
    copyable<Token> &&
    is_nothrow_move_constructible_v<Token> &&
    is_nothrow_move_assignable_v<Token> &&
    is_nothrow_copy_constructible_v<Token> &&
    is_nothrow_copy_assignable_v<Token> &&
    sender<Sender> &&
    requires(Token token, Sender&& snd) {
      { token.nest(std::forward<Sender>(snd)) } -> sender;
    };

An async scope token is a non-owning handle to an async scope. The nest() method on a token attempts to associate its input sender with the handle’s async scope in a scope-defined way. See execution::nest for the semantics of nest().

An async scope token behaves like a pointer-to-async-scope; tokens are no-throw copyable and movable, and it is undefined behaviour to invoke nest() on a token that has outlived its scope.

5.3 execution::async_scope

template <class Scope>
concept async_scope =
    requires(Scope scope) {
      { scope.get_token() } -> async_scope_token<decltype(just())>;
      { scope.join() } -> sender;
    };

As described above, an async scope is a type that implements a bookkeeping policy for senders. If a given type, Scope, satisifies async_scope<Scope> then, for a value, scope, of type Scope:

5.4 execution::nest

template <sender Sender, async_scope_token<Sender> Token>
auto nest(Sender&& snd, Token token) noexcept(noexcept(token.nest(std::forward<Sender>(snd))))
    -> decltype(token.nest(std::forward<Sender>(snd)));

Attempts to associate the given sender with the given scope token’s scope in a scope-defined way. When successful, the return value is an “associated sender” with the same behaviour and possible completions as the input sender, plus the additional, scope-specific behaviours that are necessary to implement the scope’s bookkeeping policy. When the attempt fails, nest() must either eagerly throw an exception, or return a “unassociated sender” that, when started, unconditionally completes with set_stopped().

A call to nest() does not start the given sender and is not expected to incur allocations.

When nest() returns an associated sender:

When nest() returns an unassociated sender:

Regardless of whether the returned sender is associated or unassociated, it is multi-shot if the input sender is multi-shot and single-shot otherwise.

5.5 execution::spawn()

namespace { // exposition-only

template <class Env>
struct spawn-env; // exposition-only

template <class Env>
struct spawn-receiver { // exposition-only
    void set_value() noexcept;
    void set_stopped() noexcept;

    spawn-env<Env> get_env() const noexcept;
};

}

template <sender Sender, async_scope_token<Sender> Token, class Env = empty_env>
  requires sender_to<Sender, spawn-receiver<Env>>
void spawn(Sender&& snd, Token token, Env env = {});

Invokes nest(std::forward<Sender>(snd), token) to associate the given sender with the given token’s scope and then eagerly starts the resulting sender.

Starting the nested sender involves a dynamic allocation of the sender’s operation-state. The following algorithm determines which Allocator to use for this allocation:

The operation-state is constructed by connecting the nested sender to a spawn-receiver. The operation-state is destroyed and deallocated after the spawned sender completes.

A spawn-receiver, sr, responds to get_env(sr) with an instance of a spawn-env<Env>, senv. The result of get_allocator(senv) is a copy of the Allocator used to allocate the operation-state. For all other queries, Q, the result of Q(senv) is Q(env).

This is similar to start_detached() from [P2300R7], but the scope may observe and participate in the lifecycle of the work described by the sender. The counting_scope described in this paper uses this opportunity to keep a count of nested senders that haven’t finished, and to prevent new work from being started once the counting_scope’s join-sender has been started.

The given sender must complete with set_value() or set_stopped() and may not complete with an error; the user must explicitly handle the errors that might appear as part of the sender-expression passed to spawn().

User expectations will be that spawn() is asynchronous and so, to uphold the principle of least surprise, spawn() should only be given non-blocking senders. Using spawn() with a sender generated by on(sched, blocking-sender) is a very useful pattern in this context.

NOTE: A query for non-blocking start will allow spawn() to be constrained to require non-blocking start.

Usage example:

...
for (int i = 0; i < 100; i++)
    spawn(on(sched, some_work(i)), scope.get_token());

5.6 execution::spawn_future()

namespace { // exposition-only

template <class Env>
struct future-env; // exposition-only

template <valid-completion-signatures Sigs>
struct future-sender; // exposition-only

template <sender Sender, class Env>
using future-sender-t = // exposition-only
    future-sender<completion_signatures_of_t<Sender, future-env<Env>>>;

}

template <sender Sender, async_scope_token<Sender> Token, class Env = empty_env>
future-sender-t<Sender, Env> spawn_future(Sender&& snd, Token token, Env env = {});

Invokes nest(std::forward<Sender>(snd), token) to associate the given sender with the given token’s scope, eagerly starts the resulting sender, and returns a future-sender that provides access to the result of the given sender.

Similar to spawn(), starting the nested sender involves a dynamic allocation of some state. spawn_future() chooses an Allocator for this allocation in the same way spawn() does: use the result of get_allocator(env) if that is a valid expression, otherwise use the result of get_allocator(get_env(snd)) if that is a valid expression, otherwise use a std::allocator<>.

Unlike spawn(), the dynamically allocated state contains more than just an operation-state for the nested sender; the state must also contain storage for the result of the nested sender, however it eventually completes, and synchronization facilities for resolving the race between the nested sender’s production of its result and the returned sender’s consumption or abandonment of that result.

Also unlike spawn(), spawn_future() returns a future-sender rather than void. The returned sender, fs, is a handle to the spawned work that can be used to consume or abandon the result of that work. When fs is connected and started, it waits for the spawned sender to complete and then completes itself with the spawned sender’s result. If fs is destroyed before being connected, or if fs is connected but then the resulting operation-state is destroyed before being started, then a stop request is sent to the spawned sender in an effort to short-circuit the computation of a result that will not be observed. If fs receives a stop request from its receiver before the spawned sender completes, the stop request is forwarded to the spawned sender and then fs completes; if the spawned sender happens to complete between fs forwarding the stop request and completing itself then fs may complete with the result of the spawned sender as if the stop request was never received but, otherwise, fs completes with stopped and the result of the spawned sender is ignored. The completion signatures of fs include set_stopped() and all the completion signatures of the spawned sender.

The receiver, fr, that is connected to the nested sender responds to get_env(fr) with an instance of future-env<Env>, fenv. The result of get_allocator(fenv) is a copy of the Allocator used to allocate the dynamically allocated state. The result of get_stop_token(fenv) is a stop token that will be “triggered” (i.e. signal that stop is requested) by the returned future-sender when it is dropped or receives a stop request itself. For all other queries, Q, the result of Q(fenv) is Q(env).

This is similar to ensure_started() from [P2300R7], but the scope may observe and participate in the lifecycle of the work described by the sender. The counting_scope described in this paper uses this opportunity to keep a count of nested senders that haven’t finished, and to prevent new work from being started once the counting_scope’s join-sender has been started.

Unlike spawn(), the sender given to spawn_future() is not constrained on a given shape. It may send different types of values, and it can complete with errors.

NOTE: there is a race between the completion of the given sender and the start of the returned sender. The spawned sender and the returned future-sender use the synchronization facilities in the dynamically allocated state to resolve this race.

Cancelling the returned sender requests cancellation of the given sender, snd, but does not affect any other senders.

Usage example:

...
sender auto snd = spawn_future(on(sched, key_work()), scope) | then(continue_fun);
for (int i = 0; i < 10; i++)
    spawn(on(sched, other_work(i)), scope);
return when_all(scope.join(), std::move(snd));

5.7 execution::simple_counting_scope

struct simple_counting_scope {
    simple_counting_scope() noexcept;
    ~simple_counting_scope();

    // simple_counting_scope is immovable and uncopyable
    simple_counting_scope(const simple_counting_scope&) = delete;
    simple_counting_scope(simple_counting_scope&&) = delete;
    simple_counting_scope& operator=(const simple_counting_scope&) = delete;
    simple_counting_scope& operator=(simple_counting_scope&&) = delete;

    template <sender S>
    struct nest-sender; // exposition-only

    struct token {
      template <sender S>
      [[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const
          noexcept(std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

     private:
      friend simple_counting_scope;

      token(simple_counting_scope* s) noexcept;

      simple_counting_scope* scope; // exposition-only
    };

    token get_token() noexcept;

    void close() noexcept;

    struct join-sender; // exposition-only

    [[nodiscard]] join-sender join() noexcept;
};

A simple_counting_scope maintains a count of outstanding operations and goes through several states durings its lifetime:

The following diagram illustrates the simple_counting_scope’s state machine:

Note: a scope is “open” if its current state is unused, open, or open-and-joining; a scope is “closed” if its current state is closed, unused-and-closed, closed-and-joining, or joined.

Instances start in the unused state after being constructed. This is the only time the scope’s state can be set to unused. When the simple_counting_scope destructor starts, the scope must be in the unused, unused-and-closed, or joined state; otherwise, the destructor invokes std::terminate(). Permitting destruction when the scope is in the unused or unused-and-closed state ensures that instances of simple_counting_scope can be used safely as data-members while preserving structured functionality.

Connecting and starting a join-sender returned from join() moves the scope to either the open-and-joining or closed-and-joining state. Merely calling join() or connecting the join-sender does not change the scope’s state—the operation-state must be started to effect the state change. A started join-sender completes when the scope’s count of outstanding operations reaches zero, at which point the scope transitions to the joined state.

Calling close() on a simple_counting_scope moves the scope to the closed, unused-and-closed, or closed-and-joining state, and causes all future calls to nest() to fail.

Any call to nest() may throw an exception if copying or moving the input sender into the returned nest-sender throws an exception. nest() provides the Strong Exception Guarantee so the scope’s state is left unchanged if an exception is thrown while constructing the returned nest-sender.

Assuming nest() does not throw:

While a scope is open, calls to nest() that return normally will have incremented the scope’s count of oustanding operations. In this case, the resulting nest-sender is an associated sender that acts like an RAII handle: the scope’s internal count is incremented when the sender is created and decremented when the sender is “done with the scope”, which happens when the sender or its operation-state is destroyed. Moving a nest-sender transfers responsibility for decrementing the count from the old instance to the new one. Copying an associated nest-sender is permitted if the sender it’s wrapping is copyable, but the copy may “fail” since copying requires incrementing the scope’s count, which is only allowed when the scope is open; if copying fails, the new sender is an unassociated sender that behaves as if it were the result of a failed call to nest().

While a scope is closed, calls to nest() that return normally will have failed to increment the scope’s count of outstanding operations or otherwise change the scope’s state. In this case, the resulting nest-sender is an unassociated sender. Unassociated nest-senders do not have a reference to the scope they came from and always complete with stopped when connected and started. Copying or moving an unassociated sender produces another unassociated sender.

Under the standard assumption that the arguments to nest() are and remain valid while evaluating nest(), it is always safe to invoke any supported operation on the returned nest-sender.

The state transitions of a simple_counting_scope mean that it can be used to protect asynchronous work from use-after-free errors. Given a resource, res, and a simple_counting_scope, scope, obeying the following policy is enough to ensure that there are no attempts to use res after its lifetime ends:

It is safe to destroy a scope in the unused or unusued-and-closed state because there can’t be any work referring to the resources protected by the scope.

A simple_counting_scope is uncopyable and immovable so its copy and move operators are explicitly deleted. simple_counting_scope could be made movable but it would cost an allocation so this is not proposed.

5.7.1 simple_counting_scope::simple_counting_scope()

simple_counting_scope::simple_counting_scope() noexcept;

Initializes a simple_counting_scope in the unused state with the count of outstanding operations set to zero.

5.7.2 simple_counting_scope::~simple_counting_scope()

simple_counting_scope::~simple_counting_scope();

Checks that the simple_counting_scope is in the joined, unused, or unused-and-closed state and invokes std::terminate() if not.

5.7.3 simple_counting_scope::get_token()

simple_counting_scope::token get_token() noexcept;

Returns a simple_counting_scope::token referring to the current scope, as if by invoking token{this}.

5.7.4 simple_counting_scope::close()

void close() noexcept;

Moves the scope to the closed, unused-and-closed, or closed-and-joining state. After a call to close(), all future calls to nest() that return normally return unassociated senders.

5.7.5 simple_counting_scope::join()

struct join-sender; // exposition-only

[[nodiscard]] join-sender join() noexcept;

Returns a join-sender. When the join-sender is connected to a receiver, r, it produces an operation-state, o. When o is started, the scope moves to either the open-and-joining or closed-and-joining state. o completes with set_value() when the scope moves to the joined state, which happens when the scope’s count of outstanding senders drops to zero. o may complete synchronously if it happens to observe that the count of outstanding senders is already zero when started; otherwise, o completes on the execution context associated with the scheduler in its receiver’s environment by asking its receiver, r, for a scheduler, sch, with get_scheduler(get_env(r)) and then starting the sender returned from schedule(sch). This requirement to complete on the receiver’s scheduler restricts which receivers a join-sender may be connected to in exchange for determinism; the alternative would have the join-sender completing on the execution context of whichever nested operation happens to be the last one to complete.

5.7.6 simple_counting_scope::token::nest()

template <sender S>
struct nest-sender; // exposition-only

template <sender S>
[[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const noexcept(
        std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

Attempts to return an associated nest-sender constructed from s. The attempt will be successful if and only if:

If construction of the nest-sender throws, the scope’s state is left unchanged. Otherwise, the following atomic state change is attempted on the token’s scope:

The atomic state change succeeds if the scope is observed to be in the unused, open, or open-and-joining state; otherwise it fails.

If the atomic state change fails then the return value is an unassociated nest-sender.

An associated nest-sender is a kind of RAII handle to the scope; it is responsible for decrementing the scope’s count of outstanding senders in its destructor unless that responsibility is first given to some other object. Move-construction and move-assignment transfer the decrement responsibility to the destination instance. Connecting an instance to a receiver transfers the decrement responsibility to the resulting operation-state, which must meet the responsibility when it destroys its “child operation” (i.e. the operation-state constructed when connecting the sender, s, that was originally passed to nest()); it’s expected that the child operation will be destroyed as a side effect of the nest-sender’s operation-state’s destructor.

Note: the timing of when an operation-state decrements the scope’s count is chosen to avoid exposing user code to dangling references. Decrementing the scope’s count may move the scope to the joined state, which would allow the waiting join-sender to complete, potentially leading to the destruction of a resource protected by the scope. In general, it’s possible that the nest-sender’s receiver or the child operation’s destructor may dereference pointers to the protected resource so their execution must be completed before the scope moves to the joined state.

Whenever the balancing decrement happens, it’s possible that the scope has transitioned to the open-and-joining or closed-and-joining state since the nest-sender was constructed, which means that there is a join-sender waiting to complete. If the decrement brings the count of outstanding operations to zero then the waiting join-sender must be notified that the scope is now joined and the sender can complete.

A call to nest() does not start the given sender. A call to nest() is not expected to incur allocations other than whatever might be required to move or copy s.

Similar to spawn_future(), nest() doesn’t constrain the input sender to any specific shape. Any type of sender is accepted.

As nest() does not immediately start the given work, it is ok to pass in blocking senders.

Usage example:

sender auto example(simple_counting_scope::token token, scheduler auto sched) {
  sender auto snd = nest(key_work(), token);

  for (int i = 0; i < 10; i++)
    spawn(on(sched, other_work(i)), token);

  return on(sched, std::move(snd));
}

5.8 execution::counting_scope

struct counting_scope {
    counting_scope() noexcept;
    ~counting_scope();

    // counting_scope is immovable and uncopyable
    counting_scope(const counting_scope&) = delete;
    counting_scope(counting_scope&&) = delete;
    counting_scope& operator=(const counting_scope&) = delete;
    counting_scope& operator=(counting_scope&&) = delete;

    template <sender S>
    struct nest-sender; // exposition-only

    struct token {
      template <sender S>
      [[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const
          noexcept(std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

     private:
      friend counting_scope;

      token(counting_scope* s) noexcept;

      counting_scope* scope; // exposition-only
    };

    token get_token() noexcept;

    void close() noexcept;

    void request_stop() noexcept;

    struct join-sender; // exposition-only

    [[nodiscard]] join-sender join() noexcept;
};

A counting_scope augments a simple_counting_scope with a stop source and gives to each of its associated nest-senders a stop token from its stop source. This extension of simple_counting_scope allows a counting_scope to request stop on all of its outstanding operations by requesting stop on its stop source.

Assuming an exposition-only stop_when(sender auto&&, stoppable_token auto) (explained below), counting_scope behaves as if it were implemented like so:

struct counting_scope {
  struct token {
    template <sender S>
    sender auto nest(S&& snd) const
        noexcept(std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>) {
      return std::forward<Sender>(snd)
          | stop_when(scope_->source_.get_token())
          | ex::nest(scope_->scope_.get_token());
    }

   private:
    friend counting_scope;

    explicit token(counting_scope* scope) noexcept
      : scope_(scope) {}

    counting_scope* scope_;
  };

  token get_token() noexcept {
    return token{this};
  }

  void close() noexcept {
    return scope_.close();
  }

  void request_stop() noexcept {
    source_.request_stop();
  }

  sender auto join() noexcept {
    return scope_.join();
  }

 private:
  simple_counting_scope scope_;
  inplace_stop_source source_;
};

stop_when(sender auto&& snd, stoppable_token auto stoken) is an exposition-only sender algorithm that maps its input sender, snd, to an output sender, osnd, such that, when osnd is connected to a receiver, r, the resulting operation-state behaves the same as connecting the original sender, snd, to r, except that snd will receive a stop request when either the token returned from get_stop_token(r) receives a stop request or when stoken receives a stop request.

Other than the use of stop_when() in counting_scope::token::nest() and the addition of request_stop() to the interface, counting_scope has the same behavior and lifecycle as simple_counting_scope.

5.8.1 counting_scope::counting_scope()

counting_scope::counting_scope() noexcept;

Initializes a counting_scope in the unused state with the count of outstanding operations set to zero.

5.8.2 counting_scope::~counting_scope()

counting_scope::~counting_scope();

Checks that the counting_scope is in the joined, unused, or unused-and-closed state and invokes std::terminate() if not.

5.8.3 counting_scope::get_token()

counting_scope::token get_token() noexcept;

Returns a counting_scope::token referring to the current scope, as if by invoking token{this}.

5.8.4 counting_scope::close()

void close() noexcept;

Moves the scope to the closed, unused-and-closed, or closed-and-joining state. After a call to close(), all future calls to nest() that return normally return unassociated senders.

5.8.5 counting_scope::request_stop()

void request_stop() noexcept;

Requests stop on the scope’s internal stop source. Since all senders nested within the scope have been given stop tokens from this internal stop source, the effect is to send stop requests to all outstanding (and future) nested operations.

5.8.6 counting_scope::join()

struct join-sender; // exposition-only

[[nodiscard]] join-sender join() noexcept;

Returns a join-sender that behaves the same as the result of simple_counting_scope::join(). Connecting and starting the join-sender moves the scope to the open-and-joining or closed-and-joining state; the join-sender completes when the scope’s count of outstanding operations drops to zero, at which point the scope moves to the joined state.

5.8.7 counting_scope::token::nest()

template <sender S>
struct nest-sender; // exposition-only

template <sender S>
[[nodiscard]] nest-sender<std::remove_cvref_t<S>> nest(S&& s) const noexcept(
        std::is_nothrow_constructible_v<std::remove_cvref_t<S>, S>);

Attempts to return an associated nest-sender constructed from s following the same algorithm as simple_counting_scope::token::nest(), with the addition that senders associated with a counting_scope receive stop requests both from their (eventual) receivers and from the counting_scope’s internal stop source.

5.9 When to use counting_scope vs [P3296R0]’s let_with_async_scope

Although counting_scope and let_with_async_scope have overlapping use-cases, we specifically designed the two facilities to address separate problems. In short, counting_scope is best used in an unstructured context and let_with_async_scope is best used in a structured context.

We define “unstructured context” as:

counting_scope should be used when you have a sender you want to start in an unstructured context. In this case, spawn(sender, scope.get_token()) would be the preferred way of starting asynchronous work. scope.join() needs to be called before the owning object’s destruction in order to ensure that the object’s lifetime lives at least until all asynchronous work completes. Note that exception safety needs to be handled explicitly in the use of counting_scope.

let_with_async_scope returns a sender, and therefore can only be started in one of 3 ways:

  1. sync_wait
  2. spawn on a counting_scope
  3. co_await

let_with_async_scope will manage the scope for you, ensuring that the managed scope is always joined before let_with_async_scope completes. The algorithm frees the user from having to manage the coupling between the lifetimes of the managed scope and the resource(s) it protects with the limitation that the nested work must be fully structured. This behavior is a feature, since the scope being managed by let_with_async_scope is intended to live only until the sender completes. This also means that let_with_async_scope will be exception safe by default.

6 Design considerations

6.1 Shape of the given sender

6.1.1 Constraints on set_value()

It makes sense for spawn_future() and nest() to accept senders with any type of completion signatures. The caller gets back a sender that can be chained with other senders, and it doesn’t make sense to restrict the shape of this sender.

The same reasoning doesn’t necessarily follow for spawn() as it returns void and the result of the spawned sender is dropped. There are two main alternatives:

The current proposal goes with the second alternative. The main reason is to make it more difficult and explicit to silently drop results. The caller can always transform the input sender before passing it to spawn() to drop the values manually.

Chosen: spawn() accepts only senders that advertise set_value() (without any parameters) in the completion signatures.

6.1.2 Handling errors in spawn()

The current proposal does not accept senders that can complete with error given to spawn(). This will prevent accidental error scenarios that will terminate the application. The user must deal with all possible errors before passing the sender to spawn(). i.e., error handling must be explicit.

Another alternative considered was to call std::terminate() when the sender completes with error.

Another alternative is to silently drop the errors when receiving them. This is considered bad practice, as it will often lead to first spotting bugs in production.

Chosen: spawn() accepts only senders that do not call set_error(). Explicit error handling is preferred over stopping the application, and over silently ignoring the error.

6.1.3 Handling stop signals in spawn()

Similar to the error case, we have the alternative of allowing or forbidding set_stopped() as a completion signal. Because the goal of counting_scope is to track the lifetime of the work started through it, it shouldn’t matter whether that the work completed with success or by being stopped. As it is assumed that sending the stop signal is the result of an explicit choice, it makes sense to allow senders that can terminate with set_stopped().

The alternative would require transforming the sender before passing it to spawn, something like spawn(std::move(snd) | let_stopped(just), s.get_token()). This is considered boilerplate and not helpful, as the stopped scenarios should be implicit, and not require handling.

Chosen: spawn() accepts senders that complete with set_stopped().

6.1.4 No shape restrictions for the senders passed to spawn_future() and nest()

Similarly to spawn(), we can constrain spawn_future() and nest() to accept only a limited set of senders. But, because we can attach continuations for these senders, we would be limiting the functionality that can be expressed. For example, the continuation can handle different types of values and errors.

Chosen: spawn_future() and nest() accept senders with any completion signatures.

6.2 P2300’s start_detached()

The spawn() algorithm in this paper can be used as a replacement for start_detached proposed in [P2300R7]. Essentially it does the same thing, but it also provides the given scope the opportunity to apply its bookkeeping policy to the given sender, which, in the case of counting_scope, ensures the program can wait for spawned work to complete before destroying any resources references by that work.

6.3 P2300’s ensure_started()

The spawn_future() algorithm in this paper can be used as a replacement for ensure_started proposed in [P2300R7]. Essentially it does the same thing, but it also provides the given scope the opportunity to apply its bookkeeping policy to the given sender, which, in the case of counting_scope, ensures the program can wait for spawned work to complete before destroying any resources references by that work.

6.4 Supporting the pipe operator

This paper doesn’t support the pipe operator to be used in conjunction with spawn() and spawn_future(). One might think that it is useful to write code like the following:

std::move(snd1) | spawn(s); // returns void
sender auto snd3 = std::move(snd2) | spawn_future(s) | then(...);

In [P2300R7] sender consumers do not have support for the pipe operator. As spawn() works similarly to start_detached() from [P2300R7], which is a sender consumer, if we follow the same rationale, it makes sense not to support the pipe operator for spawn().

On the other hand, spawn_future() is not a sender consumer, thus we might have considered adding pipe operator to it.

On the third hand, Unifex supports the pipe operator for both of its equivalent algorithms (unifex::spawn_detached() and unifex::spawn_future()) and Unifex users have not been confused by this choice.

To keep consistency with spawn() this paper doesn’t support pipe operator for spawn_future().

7 Naming

As is often true, naming is a difficult task.

7.1 nest()

This provides a way to build a sender that is associated with a “scope”, which is a type that implements and enforces some bookkeeping policy regarding the senders nested within it. nest() does not allocate state, call connect, or call start. nest() is the basis operation for async scopes. spawn() and spawn_future() use nest() to associate a given sender with a given scope, and then they allocate, connect, and start the resulting sender.

It would be good for the name to indicate that it is a simple operation (insert, add, embed, extend might communicate allocation, which nest() does not do).

alternatives: wrap(), attach()

7.2 async_scope

This is a concept that is satisfied by types that support nesting senders within themselves. It is primarily useful for constraining the arguments to spawn() and spawn_future() to give useful error messages for invalid invocations.

Since concepts don’t support existential quantifiers and thus can’t express “type T is an async_scope if there exists a sender, s, for which t.nest(s) is valid”, the async_scope concept must be parameterized on both the type of the scope and the type of some particular sender and thus describes whether this scope type is an async_scope in combination with this sender type. Given this limitation, perhaps the name should convey something about the fact that it is checking the relationship between two types rather than checking something about the scope’s type alone. Nothing satisfying comes to mind.

alternatives: don’t name it and leave it as exposition-only

7.3 spawn()

This provides a way to start a sender that produces void and to associate the resulting async work with an async scope that can implement a bookkeeping policy that may help ensure the async work is complete before destroying any resources it is using. This allocates, connects, and starts the given sender.

It would be good for the name to indicate that it is an expensive operation.

alternatives: connect_and_start(), spawn_detached(), fire_and_remember()

7.4 spawn_future()

This provides a way to start work and later ask for the result. This will allocate, connect, and start the given sender, while resolving the race (using synchronization primitives) between the completion of the given sender and the start of the returned sender. Since the type of the receiver supplied to the result sender is not known when the given sender starts, the receiver will be type-erased when it is connected.

It would be good for the name to be ugly, to indicate that it is a more expensive operation than spawn().

alternatives: spawn_with_result()

7.5 counting_scope

A counting_scope represents the root of a set of nested lifetimes.

One mental model for this is a semaphore. It tracks a count of lifetimes and fires an event when the count reaches 0.

Another mental model for this is block syntax. {} represents the root of a set of lifetimes of locals and temporaries and nested blocks.

Another mental model for this is a container. This is the least accurate model. This container is a value that does not contain values. This container contains a set of active senders (an active sender is not a value, it is an operation).

alternatives: async_scope

7.5.1 counting_scope::join()

This method returns a sender that, when started, prevents new senders from being nested within the scope and then waits for the scope’s count of outstanding senders to drop to zero before completing. It is somewhat analogous to std::thread::join() but does not block.

join() must be invoked, and the returned sender must be connected, started, and completed, before the scope may be destroyed so it may be useful to convey some of this importance in the name, although std::thread has similar requirements for its join().

join() is the biggest wart in this design; the need to manually manage the end of a scope’s lifetime stands out as less-than-ideal in C++, and there is some real risk that users will write deadlocks with join() so perhaps join() should have a name that conveys danger.

alternatives: complete(), close()

7.6 “Token” as in async_scope_token and counting_scope::token

The first several revisions of this paper did not separate the responsibilities of an async scope into the scope and its tokens. Revision 3 introduces this split to help separate the lifetime-management interface from the nesting interface, which the authors expect to help avoid deadlocks (e.g. it’s harder with the new design to nest the join-sender within the scope being joined). The name “token” was chosen by analogy to “stop source” and “stop token”, which provides a similar split of responsibilities.

alternatives: “handle”, “ref” (as a contraction of “reference”)

8 Acknowledgements

Thanks to Andrew Royes for unwavering support for the development and deployment of Unifex at Meta and for recognizing the importance of contributing this paper to the C++ Standard.

Thanks to Eric Niebler for the encouragement and support it took to get this paper published.

9 References

[Dahl72] O.-J. Dahl, E. W. Dijkstra, and C. A. R. Hoare. Structured Programming. Academic Press Ltd., 1972.
[folly::coro] folly::coro.
https://github.com/facebook/folly/tree/main/folly/experimental/coro
[folly::coro::AsyncScope] folly::coro::AsyncScope.
https://github.com/facebook/folly/blob/main/folly/experimental/coro/AsyncScope.h
[io_uring HTTP server] io_uring HTTP server.
https://github.com/facebookexperimental/libunifex/blob/main/examples/linux/http_server_io_uring_test.cpp
[libunifex] libunifex.
https://github.com/facebookexperimental/libunifex/
[P2079R2] Lee Howes, Ruslan Arutyunyan, Michael Voss. 2022-01-15. System execution context.
https://wg21.link/p2079r2
[P2300R7] Eric Niebler, Michał Dominiak, Georgy Evtushenko, Lewis Baker, Lucian Radu Teodorescu, Lee Howes, Kirk Shoop, Michael Garland, Bryce Adelstein Lelbach. 2023-04-21. `std::execution`.
https://wg21.link/p2300r7
[P3296R0] Anthony Williams. let_async_scope.
https://wg21.link/p3296r0
[rsys] A smaller, faster video calling library for our apps.
https://engineering.fb.com/2020/12/21/video-engineering/rsys/
[unifex::v1::async_scope] unifex::v1::async_scope.
https://github.com/facebookexperimental/libunifex/blob/main/include/unifex/v1/async_scope.hpp
[unifex::v2::async_scope] unifex::v2::async_scope.
https://github.com/facebookexperimental/libunifex/blob/main/include/unifex/v2/async_scope.hpp