P0260R11
C++ Concurrent Queues

1. Acknowledgments

Thanks to David Goldblatt for his help with the wording!

2. Revision History

This paper revises P0260R10 - 2024-06-26 as follows.

• Implement feedback from LEWG and SG1 in St. Louis:

• Make concept exposition only

• Require async operations to run on the scheduler of the receiver of the operation

• Call set_error for async operations if queue is closed

• Reintroduced accidentally removed data-race freeness from R9

• Require sequential constistent semantics for bounded_queue

• Remove experimental leftovers

P0260R10 revises P0260R9 - 2024-05-19 as follows.

• Implement feedback from SG1 in St. Louis:

• Split concept into three

• Require try_* to be lockfree (w/ error code busy)

• Drop is_always_lock_free

• Drop capacity()

• Removed discussion points forSG1

• Removed TS ship vehicle

• General cleanup in the design part

P0260R9 revises P0260R8 - 2024-03-08 as follows.

• Added more wording

• Fixed capacity

• Changed push/pop wording to use "strongly happens before"

• Added discussion points

• Removed paragraph about ctors/dtors returning on same thread

• try_* now never blocks (even for contention on internal synchronization)

• Wording for spurious failures of try_*

• The constructors for bounded_queue that pre-fill the queue have been removed

• Reference to P3282 added

• Moved discussion about try_push(T &&, T &) to historic contents.

P0260R8 revises P0260R7 - 2023-06-15 as follows.

• Restructured document

• Fix typos

• Implement LEWG feedback to derive conqueue_errc from system_error

• Implement LEWG feedback to add range constructor and go back to InputIterator

• size_t capacity() added

• Added TBB concurrent_bounded_queue as existing practice

• Moved discussion about pop() interface to separate paper

• reintegrated P1958 buffer_queue

• Renamed buffer_queue to bounded_queue

• Added proposed wording (incomplete)

• Updated TS questions

Older revision history was moved to after the proposed wording.

2.1. Discussion Points For This Revision

2.1.1. Discussion Points For SG1

• executor/scheduler on which an operation/continuation runs

• sequential consistency for push/pop

2.1.2. Discussion Points For LEWG

• async_*: Is closed condition a stop condition or a special return or an error?

3. Introduction

Queues provide a mechanism for communicating data between components of a system.

The existing deque in the standard library is an inherently sequential data structure. Its reference-returning element access operations cannot synchronize access to those elements with other queue operations. So, concurrent pushes and pops on queues require a different interface to the queue structure.

Moreover, concurrency adds a new dimension for performance and semantics. Different queue implementation must trade off uncontended operation cost, contended operation cost, and element order guarantees. Some of these trade-offs will necessarily result in semantics weaker than a serial queue.

Concurrent queues come in a several different flavours, e.g.

• bounded vs. unbounded

• blocking vs. overwriting

• single-ended vs. multi-ended

• strict FIFO ordering vs. priority based ordering

The syntactic concepts proposed here should be valid for all of these flavours, while the concrete semantics might differ.

4. Existing Practice

4.1. Concept of a Bounded Queue

The basic concept of a bounded queue with potentially blocking push and pop operations is very old and widely used. It’s generally provided as an operating system level facility, like other concurrency primitives.

POSIX 2001 has mq message queues (with priorities and timeout).

FreeRTOS, Mbed, vxWorks provide bounded queues.

4.2. Bounded Queues with C++ Interface

4.2.1. Literature

The first concurrent queue I’ve seen was in [Hughes97]. It was full of bugs and as such shows what will go wrong if C++ doesn’t provide a standard queue. It’s unbounded.

Anthony Williams provided a queue in C++ Concurrency in Action. It’s unbounded.

4.2.2. Boost

Boost has a number of queues, as official library and as example uses of synchronization primitives.

Boost Message Queue only transfers bytes, not objects. It’s bounded.

Boost Lock-Free Queue and Boost Lock-Free SPSC Queue have only non-blocking operations. Boost Lock-Free Queue is bounded or unbounded, Boost Lock-Free SPSC Queue is bounded.

Boost Synchronized Queue is an implementation of an early version of this proposal.

4.2.3. TBB

TBB has concurrent_bounded_queue (TBB Bounded Queue) and an unbounded version concurrent_queue TBB Unbounded Queue.

5. Conceptual Interface

We provide basic queue operations, and then extend those operations to cover other important use cases.

Due to performance issues, the conceptual interface is split into three separate interfaces. The basic_concurrent_queue concept provides the interface push and pop and closing the queue. The concurrent_queue concept is based on basic_concurrent_queue and provides the additional interface try_push and try_pop. The async_concurrent_queue concept is also based on basic_concurrent_queue provides the additional interface async_push and async_pop.

The concrete queue bounded_queue models all these concepts.

5.1. Error Class

By analogy with how future defines their errors, we introduce conqueue_errc enum and conqueue_error:

enum class conqueue_errc { empty, full, closed, busy };

const error_category& conqueue_category() noexcept;

class conqueue_error : public system_error;

5.2. Basic Operations

The essential solution to the problem of concurrent queuing is to shift to value-based operations, rather than reference-based operations.

The basic operations are:

void queue::push(const T& x);
void queue::push(T&& x);
bool queue::push(const T& x, std::error_code& ec);
bool queue::push(T&& x, std::error_code& ec);

Pushes x onto the queue via copy or move construction (and possibly blocks). The first version throws std::conqueue_error(conqueue_errc::closed) if the queue is closed. The second version returns true on success, and false and sets ec to error_code(conqueue_errc::closed) if the queue is closed.

T queue::pop();
std::optional<T> queue::pop(std::error_code& ec);

Pops a value from the queue via move construction into the return value. The first version throws std::conqueue_error(conqueue_errc::closed) if the queue is empty and closed; the second version, if the queue is empty and closed, returns std::nullopt and sets ec to std::error_code(conqueue_errc::closed). If queue is empty and open, the operation blocks until an element is available.

The exploration of different version of error reporting was moved to a separate paper [P2921R0].

5.3. Asynchronous Operations

sender auto queue::async_push(T x);
sender auto queue::async_pop();

These operations return a sender that will push or pop the element. Senders must support cancellation and if the receiver is currently waiting on a push or pop operation and no longer interested in performing the operation, it should be removed from any waiting queues, if any, and be completed with std::execution::set_stopped.

5.4. Non-Waiting Operations

Waiting on a full or empty queue can take a while, which has an opportunity cost. Avoiding that wait enables algorithms to avoid queuing speculative work when a queue is full, to do other work rather than wait for a push on a full queue, and to do other work rather than wait for a pop on an empty queue.

bool queue::try_push(const T& x, std::error_code& ec);
bool queue::try_push(T&& x, std::error_code& ec);

If the queue is full or closed, returns false and sets the respective status in the ec. Otherwise, push the value onto the queue via copy or move construction and returns true.

optional<T> queue::try_pop(std::error_code& ec);

If the queue is empty, returns nullopt and set ec to conqueue_errc::empty. Otherwise, pop the element from the queue via move construction into the optional. Return true and set ec to conqueue_errc::success.

These operations will never block. If they would have to wait for internal synchronization, they return false and set ec to conqueue_errc::busy.

5.5. Closed Queues

Threads using a queue for communication need some mechanism to signal when the queue is no longer needed. The usual approach is add an additional out-of-band signal. However, this approach suffers from the flaw that threads waiting on either full or empty queues need to be woken up when the queue is no longer needed. To do that, you need access to the condition variables used for full/empty blocking, which considerably increases the complexity and fragility of the interface. It also leads to performance implications with additional mutexes or atomics. Rather than require an out-of-band signal, we chose to directly support such a signal in the queue itself, which considerably simplifies coding.

To achieve this signal, a thread may close a queue. Once closed, no new elements may be pushed onto the queue. Push operations on a closed queue will either return conqueue_errc::closed (when they have ec parameter) or throw conqueue_error(conqueue_errc::closed) (when they do not). Elements already on the queue may be popped off. When a queue is empty and closed, pop operations will either set ec to conqueue_errc::closed (when they have a ec parameter) or throw conqueue_error(conqueue_errc::closed) otherwise.

The additional operations are as follows:

void queue::close() noexcept;

Close the queue.

bool queue::is_closed() const noexcept;

Return true iff the queue is closed.

5.6. Element Type Requirements

The above operations require element types with copy/move constructors, and destructor. These operations may be trivial. The copy/move constructors operators may throw, but must leave the objects in a valid state for subsequent operations.

5.7. Exception Handling

push() and pop() may throw an exceptions of type conqueue_error that’s derived from std::system_error and will contain a conqueue_errc.

Concurrent queues cannot completely hide the effect of exceptions thrown by the element type, in part because changes cannot be transparently undone when other threads are observing the queue.

Queues may rethrow exceptions from storage allocation, mutexes, or condition variables.

If the element type operations required do not throw exceptions, then only the exceptions above are rethrown.

When an element copy/move may throw, some queue operations have additional behavior.

• A push operation shall rethrow and the state of the queue is unaffected.

• A pop operation shall rethrow and the element is popped from the queue. The value popped is effectively lost. (Doing otherwise would likely clog the queue with a bad element.)

6. Concrete Queues

In addition to the concepts, the standard needs at least one concrete queue. This paper proposes a fixed-size bounded_queue. It meets both concepts for queues. The constructor takes a parameter specifying the maximum number of elements in the queue and an optional allocator.

bounded_queue is only allowed to allocate in its constructor. Static Storage for C++ Concurrent bounded_queue (P3282) proposes to add a constructor where the queue doesn’t own the storage.

6.1. Memory Order Guarantees

bounded_queue provides sequential consistent semantics.

The reasoning for this is that for a queue (as high-level data structure) provided by the IS usage safety should be more important than efficiency. Background on this is found in Memory Model Issues for Concurrent Data Structures (P0387R1) and Concurrency Safety in C++ Data Structures (P0495).

The example fro P0387R1 illustrates the problem clearly:

q and log are concurrent queues:

With only acquire/release this could result in log having "pushed 1" and "pushed 2", while q has 2 and 1.

bounded_queue will probably need a locking implementation anyway, which provides sequential consistency for free.

7. Proposed Wording

Add a new subclause to clause [thread] with the following contents.

7.1. Concurrent Queues

7.1.1. General

Concurrent queues provide a mechanism to transfer objects from one point in a program to another without producing data races.

7.1.2. Header <conqueue> synopsis

namespace std {
  template <class T, class Q>
    concept basic-concurrent-queue = see below; // exposition only
    concept concurrent-queue = see below; // exposition only
    concept async-concurrent-queue = see below; // exposition only

    enum class conqueue_errc {
      empty = implementation-defined,
      full = implementation-defined,
      closed = implementation-defined,
      busy = implementation-defined
    };

    template<> struct is_error_code_enum : public true_type { };
    const error_category& conqueue_category() noexcept;
    error_code make_error_code(conqueue_errc e) noexcept;
    error_condition make_error_condition(conqueue_errc e) noexcept;

    class conqueue_error;

    template <typename T, class Allocator = std::allocator<T>>
    class bounded_queue;
}

7.1.3. Error reporting

const error_category& conqueue_category() noexcept;

1. Returns: A reference to an object of a type derived from class error_category.

2. The object’s default_error_condition and equivalent virtual functions shall behave as specified for the class error_category. The object’s name virtual function shall return a pointer to the string "conqueue".

error_code make_error_code(conqueue_errc e) noexcept;

3. Returns: error_code(static_cast<int>(e), conqueue_category()).

error_condition make_error_condition(conqueue_errc e) noexcept;

4. Returns: error_condition(static_cast<int>(e), conqueue_category()).

7.1.4. Class conqueue_error

namespace std {
  class conqueue_error : system_error {
  public:
    explicit conqueue_error(conqueue_errc e);

    const error_code& code() const noexcept;
    const char * what() const noexcept;

  private:
    error_code ec_;          // exposition only
  };
}

explicit conqueue_error(conqueue_errc e);

1. Effects: Initializes ec_ with make_error_code(e).

const error_code& code() const noexcept;

2. Returns: ec_.

const char * what() const noexcept;

3. Returns: An NTBS incorporating code().message().

7.1.5. Basic Concurrent Queue Concept

1. The exposition-only concept basic_concurrent_queue defines the requirements for a basic queue type.

     namespace std {
       template <class T, class Q>
         concept basic_concurrent_queue = // exposition only
           move_constructible<remove_cvref_t<T>> &&
           same_as<decay_t<T>, Q::value_type> &&
           requires (Q q, T &&t, std::error_code ec) {
             q.is_closed() noexcept -> bool;
             q.close() noexcept -> void;
             q.push(std::forward<T>(t)) -> void;
             q.push(std::forward<T>(t), ec) -> bool;
             q.pop() -> T;
             q.pop(ec) -> std::optional<T>;
           };
   }
   

2. In the following description, Q denotes a type conforming to the basic_concurrent_queue concept, q denotes an object of type Q, t denotes an object convertible to Q::value_type and ec denotes an object of type std::error_code.

3. The expression q.is_closed() has the following semantics:

   1. Returns: true iff the queue is closed.

4. The expression q.close() has the following semantics:

   1. Effects: Closes the queue.

5. push is a push operation and pop is a pop operation.

6. Concepts that subsume queue_base may have additional push and pop operations.

7. Calls to operations (except constructor and destructor) on the same queue from different threads of execution do not introduce data races.

8. Successful push and pop operations will call a constructor of T. For the description of concrete queues, pre-ctor is the call of the constructor and post-ctor is the return of the constructor. Likewise successful pop operations will call the destructor of T and we have pre-dtor and post-dtor.

9. If an object is deposited into a queue by a push operation it can be extracted from the queue and returned by a pop operation. The post-ctor of the push operation of the deposit strongly happens before the return of the pop operation. A pop operation on a queue can only extract objects that were deposited into the same queue and each object can only be extracted once.

10. Concrete queues shall specify whether a push may block for space available in the queue (bounded queue) or whether a push may allocate new space (unbounded queue).

11. The expression q.push(t) has the following semantics:

    1. Effects: If the queue is not closed, t is deposited into q.

    2. Throws: If the queue is closed throw conqueue_error(conqueue_errc::closed). A concrete queue may throw additional exceptions.

12. The expression q.push(t, ec) has the following semantics:

    1. Effects: If the queue is not closed, t is deposited into q.

    2. Returns:

       • true if t was deposited into q; false otherwise.

    3. Error conditions:

       • closed if the queue is closed.

13. The expression q.pop() has the following semantics:

    1. Effects: Blocks the current thread until there’s an object available in the queue or until the queue is closed. If the queue is closed, throw. Otherwise, if there is an object available in the queue, extract the object and return it.

    2. Returns: the available object in the queue.

    3. Throws: If the queue is closed throw conqueue_error(conqueue_errc::closed). A concrete queue may throw additional exceptions.

14. The expression q.pop(ec) has the following semantics:

    1. Effects: Blocks the current thread until there’s an object available in the queue or until the queue is closed. If there is an object available in the queue, extract the object and return it.

    2. Returns: optional<T>(t) if t was the available object in the queue, optional<T>{} otherwise.

    3. Error conditions:

       • closed if the queue is closed.

7.1.6. Concurrent Queue Concept

1. The exposition-only concept concurrent_queue defines the requirements for a concurrent queue type.

     namespace std {
       template <class T, class Q>
         concept concurrent_queue = // exposition only
           basic_concurrent_queue<T> &&
           requires (Q q, T &&t, std::error_code ec) {
             q.try_push(std::forward<T>(t), ec) -> bool;
             q.try_pop(ec) -> std::optional<T>;
           };
   }
   

2. In the following description, Q denotes a type conforming to the concurrent_queue concept, q denotes an object of type Q, t denotes an object convertible to Q::value_type and ec denotes an object of type std::error_code.

3. try_push is a push operation and try_pop is a pop operation.

4. In classes modelling this concept try_push may return false even if the queue has space for the element. Similarly try_pop may return false even if the queue has an element to be extracted. [Note: This spurious failure is normally uncommon. -- end note] An implementation should ensure that try_push() and try_pop() do not consistently spuriously fail.

5. The expression q.try_push(t, ec) has the following semantics:

   1. Effects: If the queue is not closed, and space is available in the queue, t is deposited into q. The operation will not block.

   2. Returns:

      • true if t was deposited into q; false otherwise.

   3. Error conditions:

      • closed if the queue is closed.

      • full if the queue doesn’t have space.

      • busy if the operation would block for internal synchronization.

6. The expression q.try_pop(ec) has the following semantics:

   1. Effects: If there’s an object available in the queue it will be extracted from the queue and returned. If the queue is closed an empty optional is returned. The operation will not block.

   2. Returns: optional<T>(t) if t was the available object in the queue, optional<T>{} otherwise.

   3. Error conditions:

      • closed if the queue is closed.

      • empty if the queue doesn’t have an element.

      • busy if the operation would block for internal synchronization.

7.1.7. Asynchronous Queue Concept

1. The exposition-only concept async_concurrent_queue defines the requirements for an asynchronous queue type.

     namespace std {
       template <class T, class Q>
         concept async_concurrent_queue =
           basic_concurrent_queue<T> &&
           requires (Q q, T &&t, std::error_code ec) {
             q.async_push(std::forward<T>(t)) -> std::execution::sender_of<void>;
             q.async_pop() -> std::execution::sender_of<T>;
           };
   }
   

2. In the following description, Q denotes a type conforming to the async_concurrent_queue concept, q denotes an object of type Q and t denotes an object convertible to Q::value_type.

3. async_push is a push operation and async_pop is a pop operations.

4. The expression q.async_push(t) has the following semantics:

   1. Returns: A sender object w that behaves as follows:

      1. When w is connected with some receiver r, it returns an operation state op that behaves as follows:

         1. It waits until there’s space in the queue or until the queue is closed.

         2. If there’s space in the queue t will be deposited into the queue and set_value(r) will be called.

         3. If the queue is closed set_error(r) will be called.

         4. set_value(r) or set_error(r) will be called on the scheduler of r.

5. The expression q.async_pop() has the following semantics:

   1. Returns: A sender object w that behaves as follows:

      1. When w is connected with some receiver r, it returns an operation state op that behaves as follows:

         1. It waits until there’s an object available in the queue or until the queue is closed.

         2. If there’s an object t available in the queue it will be extracted and set_value(r, t) will be called.

         3. If the queue is closed set_error(r) will be called.

         4. set_value(r) or set_error(r) will be called on the scheduler of r.

7.1.8. Class template bounded_queue

7.1.8.1. General

1. A bounded_queue models concurrent_queue and async_concurrent_queue and can hold a fixed number of objects which is given at construction time.

2. template <typename T,
     class Allocator = std::allocator<T>>
   class bounded_queue
   {
     bounded_queue() = delete;
     bounded_queue(const bounded_queue&) = delete;
     bounded_queue& operator=(const bounded_queue&) = delete;
   
   public:
     typedef T value_type;
   
     // construct/destroy
     explicit bounded_queue(size_t max_elems, const Allocator& alloc = Allocator());
   
     ~bounded_queue() noexcept;
   
     // observers
     bool is_closed() const noexcept;
   
     // modifiers
     void close() noexcept;
   
     void push(const T& x);
     void push(T&& x);
     bool push(const T& x, std::error_code& ec);
     bool push(T&& x, std::error_code& ec);
     bool try_push(const T& x, std::error_code& ec);
     bool try_push(T&& x, std::error_code& ec);
     sender auto async_push(const T&);
     sender auto async_push(T&&);
   
     T pop();
     optional<T> pop(std::error_code& ec);
     optional<T> try_pop(std::error_code& ec);
     sender auto async_pop();
   };
   

7.1.8.2. Constructor

explicit bounded_queue(size_t max_elems, const Allocator& alloc = Allocator());

3. Effects: Constructs an object with no elements, but with storage for max_elems. The storage for the elements will be allocated using alloc.

4. Remarks: The operations of bounded_queue will not allocate any memory outside the constructor.

7.1.8.3. Modifiers

1. The push and pop operations of bounded_queue provide sequential consistent semantics.

void push(const T& x);
void push(T&& x);
bool push(const T& x, std::error_code& ec);
bool push(T&& x, std::error_code& ec);

2. Effects: Blocks the current thread until there’s space in the queue or until the queue is closed.

3. Let Push1 and Push2 be push operations and Pop1 and Pop2 be pop operations, where Pop1 returns the value of the parameter given to Push1 and Pop2 returns the value of the parameter given to Push2, then there is a total order consistent with memory_order::seq_cst of pre-ctor, post-ctor, pre-dtor and post-dtor of Push1, Push2, Pop1 and Pop2, and moreover if post-ctor of Push1 is before post-ctor of Push2 in the order, then pre-ctor of Pop1 strongly happens before pre-ctor of Pop2.

4. [Note: This guarantees FIFO behaviour, but for two concurrent pushes the constructors can not determine the order in which the values are enqueued, and the constructors can run concurrently as well. -- end note]

5. [Note: This does not guarantee that constructors or destructors may ever run concurrently. An implementation may decide that two pushes (or to pops) never run concurrently. -- end note]

6. [Note: A constructor can deadlock if it tries a push or pop on the same queue. -- end note]

T pop();
optional<T> pop(std::error_code&);
optional<T> try_pop(std::error_code&);
sender auto async_pop();

7. Remarks: The constructor of the returned object and the destructor of the internal object run on the same thread of execution.

8. Old Revision History

P0260R6 revises P0260R5 - 2023-01-15 as follows.

• Fixing typos.

• Added a scope for the target TS.

• Added questions to be answered by a TS.

• Added asynchronous interface

P0260R5 revises P0260R4 - 2020-01-12 as follows.

• Added more introductory material.

• Added response to feedback by LEWGI at Prague meeting 2020.

• Added section on existing practice.

• Replaced value_pop with pop.

• Replaced is_lock_free with is_always_lockfree.

• Removed is_empty and is_full.

• Added move-into parameter to try_push(Element&&)

• Added note that exception thrown by the queue operations themselves are derived from std::exception.

• Added a note that the wording is partly invalid.

• Moved more contents into the "Abandoned" part to avoid confusion.

P0260R4 revised P0260R3 - 2019-01-20 as follows.

• Remove the binding of queue_op_status::success to a value of zero.

• Correct stale use of the Queue template parameter in shared_queue_front to Value.

• Change the return type of share_queue_ends from a pair to a custom struct.

• Move the concrete queue proposal to a separate paper, [P1958].

P0260R3 revised P0260R2 - 2017-10-15 as follows.

• Convert queue_wrapper to a function-like interface. This conversion removes the queue_base class. Thanks to Zach Lane for the approach.

• Removed the requirement that element types have a default constructor. This removal implies that statically sized buffers cannot use an array implmentation and must grow a vector implementation to the maximum size.

• Added a discussion of checking for output iterator end in the wording.

• Fill in synopsis section.

• Remove stale discussion of queue_owner.

• Move all abandoned interface discussion to a new section.

• Update paper header to current practice.

P0260R2 revised P0260R1 - 2017-02-05 as follows.

• Emphasize that non-blocking operations were removed from the proposed changes.

• Correct syntax typos for noexcept and template alias.

• Remove static from is_lock_free for generic_queue_back and generic_queue_front.

P0260R1 revised P0260R0 - 2016-02-14 as follows.

• Remove pure virtuals from queue_wrapper.

• Correct queue::pop to value_pop.

• Remove nonblocking operations.

• Remove non-locking buffer queue concrete class.

• Tighten up push/pop wording on closed queues.

• Tighten up push/pop wording on synchronization.

• Add note about possible non-FIFO behavior.

• Define buffer_queue to be FIFO.

• Make wording consistent across attributes.

• Add a restriction on element special methods using the queue.

• Make is_lock_free() for only non-waiting functions.

• Make is_lock_free() static for non-indirect classes.

• Make is_lock_free() noexcept.

• Make has_queue() noexcept.

• Make destructors noexcept.

• Replace "throws nothing" with noexcept.

• Make the remarks about the usefulness of is_empty() and is_full into notes.

• Make the non-static member functions is_... and has_... functions const.

P0260R0 revised N3533 - 2013-03-12 as follows.

• Update links to source code.

• Add wording.

• Leave the name facility out of the wording.

• Leave the push-front facility out of the wording.

• Leave the reopen facility out of the wording.

• Leave the storage iterator facility out of the wording.

N3532 revised N3434 = 12-0043 - 2012-01-14 as follows.

• Add more exposition.

• Provide separate non-blocking operations.

• Add a section on the lock-free queues.

• Argue against push-back operations.

• Add a cautionary note on the usefulness of is_closed().

• Expand the cautionary note on the usefulness of is_empty(). Add is_full().

• Add a subsection on element type requirements.

• Add a subsection on exception handling.

• Clarify ordering constraints on the interface.

• Add a subsection on a lock-free concrete queue.

• Add a section on content iterators, distinct from the existing streaming iterators section.

• Swap front and back names, as requested.

• General expository cleanup.

• Add an "Revision History" section.

N3434 revised N3353 = 12-0043 - 2012-01-14 as follows.

• Change the inheritance-based interface to a pure conceptual interface.

• Put try_... operations into a separate subsection.

• Add a subsection on non-blocking operations.

• Add a subsection on push-back operations.

• Add a subsection on queue ordering.

• Merge the "Binary Interface" and "Managed Indirection" sections into a new "Conceptual Tools" section. Expand on the topics and their rationale.

• Add a subsection to "Conceptual Tools" that provides for type erasure.

• Remove the "Synopsis" section.

• Add an "Implementation" section.

9. Implementation

An implementation is available at github.com/GorNishanov/conqueue.

A free, open-source implementation of an earlier version of these interfaces is avaliable at the Google Concurrency Library project at github.com/alasdairmackintosh/google-concurrency-library. The original buffer_queue is in ..../blob/master/include/buffer_queue.h. The concrete lock_free_buffer_queue is in ..../blob/master/include/lock_free_buffer_queue.h. The corresponding implementation of the conceptual tools is in ..../blob/master/include/queue_base.h.

10. Historic Contents

The Contents in this section is for historic reference only.

10.1. Abandoned Interfaces

10.1.1. Re-opening a Queue

There are use cases for opening a queue that is closed. While we are not aware of an implementation in which the ability to reopen a queue would be a hardship, we also imagine that such an implementation could exist. Open should generally only be called if the queue is closed and empty, providing a clean synchronization point, though it is possible to call open on a non-empty queue. An open operation following a close operation is guaranteed to be visible after the close operation and the queue is guaranteed to be open upon completion of the open call. (But of course, another close call could occur immediately thereafter.)

void queue::open();

Open the queue.

Note that when is_closed() returns false, there is no assurance that any subsequent operation finds the queue closed because some other thread may close it concurrently.

If an open operation is not available, there is an assurance that once closed, a queue stays closed. So, unless the programmer takes care to ensure that all other threads will not close the queue, only a return value of true has any meaning.

Given these concerns with reopening queues, we do not propose wording to reopen a queue.

10.1.2. Non-Blocking Operations

For cases when blocking for mutual exclusion is undesirable, one can consider non-blocking operations. The interface is the same as the try operations but is allowed to also return queue_op_status::busy in case the operation is unable to complete without blocking.

queue_op_status queue::nonblocking_push(const Element&);\ queue_op_status queue::nonblocking_push(Element&&);

If the operation would block, return queue_op_status::busy. Otherwise, if the queue is full, return queue_op_status::full. Otherwise, push the Element onto the queue. Return queue_op_status::success.

queue_op_status queue::nonblocking_pop(Element&);

If the operation would block, return queue_op_status::busy. Otherwise, if the queue is empty, return queue_op_status::empty. Otherwise, pop the Element from the queue. The element will be moved out of the queue in preference to being copied. Return queue_op_status::success.

These operations will neither wait nor block. However, they may do nothing.

The non-blocking operations highlight a terminology problem. In terms of synchronization effects, nonwaiting_push on queues is equivalent to try_lock on mutexes. And so one could conclude that the existing try_push should be renamed nonwaiting_push and nonblocking_push should be renamed try_push. However, at least Thread Building Blocks uses the existing terminology. Perhaps better is to not use try_push and instead use nonwaiting_push and nonblocking_push.

**In November 2016, the Concurrency Study Group chose to defer non-blocking operations. Hence, the proposed wording does not include these functions. In addition, as these functions were the only ones that returned busy, that enumeration is also not included.**

10.1.3. Push Front Operations

Occasionally, one may wish to return a popped item to the queue. We can provide for this with push_front operations.

void queue::push_front(const Element&);\ void queue::push_front(Element&&);

Push the Element onto the back of the queue, i.e. in at the end of the queue that is normally popped. Return queue_op_status::success.

queue_op_status queue::try_push_front(const Element&);\ queue_op_status queue::try_push_front(Element&&);

If the queue was full, return queue_op_status::full. Otherwise, push the Element onto the front of the queue, i.e. in at the end of the queue that is normally popped. Return queue_op_status::success.

queue_op_status queue::nonblocking_push_front(const Element&);\ queue_op_status queue::nonblocking_push_front(Element&&);

If the operation would block, return queue_op_status::busy. Otherwise, if the queue is full, return queue_op_status::full. Otherwise, push the Element onto the front queue. i.e. in at the end of the queue that is normally popped. Return queue_op_status::success.

This feature was requested at the Spring 2012 meeting. However, we do not think the feature works.

• The name push_front is inconsistent with existing \"push back\" nomenclature.

• The effects of push_front are only distinguishable from a regular push when there is a strong ordering of elements. Highly concurrent queues will likely have no strong ordering.

• The push_front call may fail due to full queues, closed queues, etc. In which case the operation will suffer contention, and may succeed only after interposing push and pop operations. The consequence is that the original push order is not preserved in the final pop order. So, push_front cannot be directly used as an \'undo\'.

• The operation implies an ability to reverse internal changes at the front of the queue. This ability implies a loss efficiency in some implementations.

In short, we do not think that in a concurrent environment push_front provides sufficient semantic value to justify its cost. Consequently, the proposed wording does not provide this feature.

10.1.4. Queue Names

It is sometimes desirable for queues to be able to identify themselves. This feature is particularly helpful for run-time diagnotics, particularly when \'ends\' become dynamically passed around between threads. See Managed Indirection.

const char* queue::name();

Return the name string provided as a parameter to queue construction.

There is some debate on this facility, but we see no way to effectively replicate the facility. However, in recognition of that debate, the wording does not provide the name facility.

10.1.5. Lock-Free Buffer Queue

We provide a concrete concurrent queue in the form of a fixed-size lock_free_buffer_queue. It meets the NonWaitingConcurrentQueue concept. The queue is still under development, so details may change.

In November 2016, the Concurrency Study Group chose to defer lock-free queues. Hence, the proposed wording does not include a concrete lock-free queue.

10.1.6. Storage Iterators

In addition to iterators that stream data into and out of a queue, we could provide an iterator over the storage contents of a queue. Such and iterator, even when implementable, would mostly likely be valid only when the queue is otherwise quiecent. We believe such an iterator would be most useful for debugging, which may well require knowledge of the concrete class. Therefore, we do not propose wording for this feature.

10.1.7. Empty and Full Queues

It is sometimes desirable to know if a queue is empty.

bool queue::is_empty() const noexcept;

Return true iff the queue is empty.

This operation is useful only during intervals when the queue is known to not be subject to pushes and pops from other threads. Its primary use case is assertions on the state of the queue at the end if its lifetime, or when the system is in quiescent state (where there no outstanding pushes).

We can imagine occasional use for knowing when a queue is full, for instance in system performance polling. The motivation is significantly weaker though.

bool queue::is_full() const noexcept;

Return true iff the queue is full.

Not all queues will have a full state, and these would always return false.

10.1.8. Queue Ordering

The conceptual queue interface makes minimal guarantees.

• The queue is not empty if there is an element that has been pushed but not popped.

• A push operation synchronizes with the pop operation that obtains that element.

• A close operation synchronizes with an operation that observes that the queue is closed.

• There is a sequentially consistent order of operations.

In particular, the conceptual interface does not guarantee that the sequentially consistent order of element pushes matches the sequentially consistent order of pops. Concrete queues could specify more specific ordering guarantees.

10.1.9. Lock-Free Implementations

Lock-free queues will have some trouble waiting for the queue to be non-empty or non-full. Therefore, we propose two closely-related concepts. A full concurrent queue concept as described above, and a non-waiting concurrent queue concept that has all the operations except push, wait_push, value_pop and wait_pop. That is, it has only non-waiting operations (presumably emulated with busy wait) and non-blocking operations, but no waiting operations. We propose naming these WaitingConcurrentQueue and NonWaitingConcurrentQueue, respectively.

Note: Adopting this conceptual split requires splitting some of the facilities defined later.

For generic code it\'s sometimes important to know if a concurrent queue has a lock free implementation.

constexpr static bool queue::is_always_lock_free() noexcept;

Return true iff the has a lock-free implementation of the non-waiting operations.

10.2. Abandoned Additional Conceptual Tools

There are a number of tools that support use of the conceptual interface. These tools are not part of the queue interface, but provide restricted views or adapters on top of the queue useful in implementing concurrent algorithms.

10.2.1. Fronts and Backs

Restricting an interface to one side of a queue is a valuable code structuring tool. This restriction is accomplished with the classes generic_queue_front and generic_queue_back parameterized on the concrete queue implementation. These act as pointers with access to only the front or the back of a queue. The front of the queue is where elements are popped. The back of the queue is where elements are pushed.

void send( int number, generic_queue_back<buffer_queue<int>> arv );

These fronts and backs are also able to provide begin and end operations that unambiguously stream data into or out of a queue.

10.2.2. Streaming Iterators

In order to enable the use of existing algorithms streaming through concurrent queues, they need to support iterators. Output iterators will push to a queue and input iterators will pop from a queue. Stronger forms of iterators are in general not possible with concurrent queues.

Iterators implicitly require waiting for the advance, so iterators are only supportable with the WaitingConcurrentQueue concept.

void iterate(
    generic_queue_back<buffer_queue<int>>::iterator bitr,
    generic_queue_back<buffer_queue<int>>::iterator bend,
    generic_queue_front<buffer_queue<int>>::iterator fitr,
    generic_queue_front<buffer_queue<int>>::iterator fend,
    int (*compute)( int ) )
{
    while ( fitr != fend && bitr != bend )
        *bitr++ = compute(*fitr++);
}

Note that contrary to existing iterator algorithms, we check both iterators for reaching their end, as either may be closed at any time.

Note that with suitable renaming, the existing standard front insert and back insert iterators could work as is. However, there is nothing like a pop iterator adapter.

10.2.3. Binary Interfaces

The standard library is template based, but it is often desirable to have a binary interface that shields client from the concrete implementations. For example, std::function is a binary interface to callable object (of a given signature). We achieve this capability in queues with type erasure.

We provide a queue_base class template parameterized by the value type. Its operations are virtual. This class provides the essential independence from the queue representation.

We also provide queue_front and queue_back class templates parameterized by the value types. These are essentially generic_queue_front<queue_base<Value>> and generic_queue_front<queue_base<Value>>, respectively.

To obtain a pointer to queue_base from an non-virtual concurrent queue, construct an instance the queue_wrapper class template, which is parameterized on the queue and derived from queue_base. Upcasting a pointer to the queue_wrapper instance to a queue_base instance thus erases the concrete queue type.

extern void seq_fill( int count, queue_back<int> b );

buffer_queue<int> body( 10 /*elements*/, /*named*/ "body" );
queue_wrapper<buffer_queue<int>> wrap( body );
seq_fill( 10, wrap.back() );

10.2.4. Managed Indirection

Long running servers may have the need to reconfigure the relationship between queues and threads. The ability to pass \'ends\' of queues between threads with automatic memory management eases programming.

To this end, we provide shared_queue_front and shared_queue_back template classes. These act as reference-counted versions of the queue_front and queue_back template classes.

The share_queue_ends(Args ... args) template function will provide a pair of shared_queue_front and shared_queue_back to a dynamically allocated queue_object instance containing an instance of the specified implementation queue. When the last of these fronts and backs are deleted, the queue itself will be deleted. Also, when the last of the fronts or the last of the backs is deleted, the queue will be closed.

auto x = share_queue_ends<buffer_queue<int>>( 10, "shared" );
shared_queue_back<int> b(x.back);
shared_queue_front<int> f(x.front);
f.push(3);
assert(3 == b.value_pop());

10.3. try_push(T&&, T&)

REVISITED in Varna

The following version was introduced in response to LEWG-I concerns about loosing the element if an rvalue cannot be stored in the queue.

queue_op_status queue::try_push(T&&, T&);

However, SG1 reaffirmed the APIs above with the following rationale:

It seems that it is possible not to loose the element in both versions:

T x = get_something();
if (q.try_push(std::move(x))) ...

With two parameter version:

T x;
if (q.try_push(get_something(), x)) ...

Ergonomically they are roughly identical. API is slightly simpler with one argument version, therefore, we reverted to original one argument version.