Document number:   N4099
Date: 2014-07-04
Revises: N3940

Project:

Programming Language C++

Project number:

TS 18822

Reply-to:

Beman Dawes <bdawes at acm dot org>

 

 

 

Working Draft,
Technical Specification — File System

 

 

 

Note: this is an early draft. It’s known to be incomplet and incorrekt, and it has lots of bad formatting.

© ISO/IEC

ISO/IEC JTC 1/SC 22/WG 21 Dxxxx
Date: 2014-07-04
ISO/IEC DTS 18822
ISO/IEC JTC1 SC22
Secretariat: ANSI

 

 

 

Programming Languages — C++
 — File System Technical Specification

Langages de programmation — C++
— Spécification technique de système de fichiers

 

 

Warning

This document is not an ISO International Standard Technical Specification. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an International Standard a Technical Specification.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.

 

 

 

Document type: Draft Technical Specification
Document stage: (40) Enquiry
Document Language: E

Copyright notice

This ISO document is a working draft or committee draft and is copyright-protected by ISO. While the reproduction of working drafts or committee drafts in any form for use by participants in the ISO standards development process is permitted without prior permission from ISO, neither this document nor any extract from it may be reproduced, stored or transmitted in any form for any other purpose without prior written permission from ISO.

Requests for permission to reproduce this document for the purpose of selling it should be addressed as shown below or to ISO’s member body in the country of the requester:

ISO copyright officer
Case postale 56, CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org

Reproduction may be subject to royalty payments or a licensing agreement.

Violators may be prosecuted.

Contents

Contents
1 Scope 
2 Conformance
   2.1 POSIX conformance
   2.2 Operating system dependent behavior conformance
   2.3 File system race behavior
3 Normative references 
4 Terms and definitions
   4.1 absolute path
   4.2 canonical path
   4.3 directory
   4.4 file
   4.5 file system
   4.6 file system race
   4.7 filename
   4.8 hard link
   4.9 link
   4.10 native encoding
   4.11 native pathname format
   4.12 NTCTS
   4.13 operating system dependent behavior
   4.14 parent directory
   4.15 path
   4.16 pathname
   4.17 pathname resolution
   4.18 relative path
   4.19 symbolic link
5 Requirements
   5.1 Namespaces and headers
   5.2 Feature test macros
6 Header <experimental/filesystem> synopsis
7 Error reporting
8 Class path
   8.1 path generic pathname format grammar
   8.2 path conversions
      8.2.1 path argument format conversions
      8.2.2 path type and encoding conversions
   8.3 path requirements
   8.4 path members 
      8.4.1 path constructors
      8.4.2 path assignments
      8.4.3 path appends
      8.4.4 path concatenation
      8.4.5 path modifiers
      8.4.6 path native format observers
      8.4.7 path generic format observers
      8.4.8 path compare
      8.4.9 path decomposition
      8.4.10 path query
   8.5 path iterators
   8.6 path non-member functions
      8.6.1 path inserter and extractor
      8.6.2 path factory functions
9 Class filesystem_error
   9.1 filesystem_error members
10 Enumerations 
   10.1 Enum class file_type
   10.2 Enum class copy_options
   10.3 Enum class perms
   10.4 Enum class directory_options
11 Class file_status
   11.1 file_status constructors
   11.2 file_status observers
   11.3 file_status modifiers
12 Class directory_entry
   12.1 directory_entry constructors
   12.2 directory_entry modifiers
   12.3 directory_entry observers
13 Class directory_iterator
   13.1 directory_iterator members
   13.2 directory_iterator non-member functions
14 Class recursive_directory_iterator
   14.1 recursive_directory_iterator members
   14.2 recursive_directory_iterator non-member functions
15 Operational functions
   15.1 Absolute 
   15.2 Canonical 
   15.3 Copy 
   15.4 Copy file 
   15.5 Copy symlink 
   15.6 Create directories 
   15.7 Create directory 
   15.8 Create directory symlink 
   15.9 Create hard link 
   15.10 Create symlink 
   15.11 Current path 
   15.12 Exists 
   15.13 Equivalent 
   15.14 File size 
   15.15 Hard link count 
   15.16 Is block file 
   15.17 Is character file 
   15.18 Is directory 
   15.19 Is empty 
   15.20 Is fifo 
   15.21 Is other 
   15.22 Is regular file 
   15.23 Is socket 
   15.24 Is symlink 
   15.25 Last write time 
   15.26 Permissions 
   15.27 Read symlink 
   15.28 Remove 
   15.29 Remove all 
   15.30 Rename 
   15.31 Resize file 
   15.32 Space 
   15.33 Status 
   15.34 Status known 
   15.35 Symlink status 
   15.36 System complete 
   15.37 Temporary directory path


1 Scope  [fs.scope]

This Technical Specification specifies requirements for implementations of an interface that computer programs written in the C++ programming language may use to perform operations on file systems and their components, such as paths, regular files, and directories. This Technical Specification is applicable to information technology systems that can access hierarchical file systems, such as those with operating systems that conform to the POSIX (3) interface. This Technical Specification is applicable only to vendors who wish to provide the interface it describes.

2 Conformance [fs.conformance]

Conformance is specified in terms of behavior. Ideal behavior is not always implementable, so the conformance sub-clauses take that into account.

2.1 POSIX conformance [fs.conform.9945]

Some behavior is specified by reference to POSIX (3). How such behavior is actually implemented is unspecified.

[Note: This constitutes an "as if" rule allowing implementations to call native operating system or other API's. —end note]

Implementations are encouraged to provide such behavior as it is defined by POSIX. Implementations shall document any behavior that differs from the behavior defined by POSIX. Implementations that do not support exact POSIX behavior are encouraged to provide behavior as close to POSIX behavior as is reasonable given the limitations of actual operating systems and file systems. If an implementation cannot provide any reasonable behavior, the implementation shall report an error as specified in § 7.

[Note: This allows users to rely on an exception being thrown or an error code being set when an implementation cannot provide any reasonable behavior. — end note]

Implementations are not required to provide behavior that is not supported by a particular file system.

[Example: The FAT file system used by some memory cards, camera memory, and floppy discs does not support hard links, symlinks, and many other features of more capable file systems, so implementations are not required to support those features on the FAT file system. —end example]

2.2 Operating system dependent behavior conformance [fs.conform.os]

Some behavior is specified as being operating system dependent (4.13). The operating system an implementation is dependent upon is implementation defined.

It is permissible for an implementation to be dependent upon an operating system emulator rather than the actual underlying operating system.

2.3 File system race behavior [fs.race.behavior]

The behavior of functions described in this Technical Specification may differ from their specification in the presence of file system races ([fs.def.race]). No diagnostic is required.

Behavior is undefined if calls to functions provided by this Technical Specification introduce a file system race (4.6).

If the possibility of a file system race would make it unreliable for a program to test for a precondition before calling a function described herein, Requires is not specified for the function.

[Note: As a design practice, preconditions are not specified when it is unreasonable for a program to detect them prior to calling the function. —end note]

3 Normative references  [fs.norm.ref]

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

[Note: The programming language and library described in ISO/IEC 14882 is herein called the C++ Standard. References to clauses within the C++ Standard are written as "C++14 §3.2". Section references are relative to N3936.

The operating system interface described in ISO/IEC 9945 is herein called POSIX. —end note]

This Technical Specification mentions commercially available operating systems for purposes of exposition. [footnote]

Unless otherwise specified, the whole of the C++ Standard's Library introduction (C++14 §17) is included into this Technical Specification by reference.

[footnote] POSIX® is a registered trademark of The IEEE. MAC OS® is a registered trademark of Apple Inc. Windows® is a registered trademark of Microsoft Corporation. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO or IEC of these products.

4 Terms and definitions [fs.definitions]

For the purposes of this document, the terms and definitions given in the C++ Standard and the following apply.

4.1 absolute path [fs.def.absolute-path]

A path that unambiguously identifies the location of a file without reference to an additional starting location. The elements of a path that determine if it is absolute are operating system dependent.

4.2 canonical path [fs.def.canonical-path]

An absolute path that has no elements that are symbolic links, and no dot or dot-dot elements (8.1).

4.3 directory [fs.def.directory]

A file within a file system that acts as a container of directory entries that contain information about other files, possibly including other directory files.

4.4 file [fs.def.file]

An object within a file system that holds user or system data. Files can be written to, or read from, or both. A file has certain attributes, including type. File types include regular files and directories. Other types of files, such as symbolic links, may be supported by the implementation.

4.5 file system [fs.def.filesystem]

A collection of files and certain of their attributes.

4.6 file system race [fs.def.race]

The condition that occurs when multiple threads, processes, or computers interleave access and modification of the same object within a file system.

4.7 filename [fs.def.filename]

The name of a file. Filenames dot  and dot-dot  have special meaning. The following characteristics of filenames are operating system dependent:

4.8 hard link [fs.def.hardlink]

A link (4.9) to an existing file. Some file systems support multiple hard links to a file. If the last hard link to a file is removed, the file itself is removed.

[Note: A hard link can be thought of as a shared-ownership smart pointer to a file. —end note]

4.9 link [fs.def.link]

A directory entry object that associates a filename with a file. A link is either a hard link (4.8) or a symbolic link (4.19).

4.10 native encoding [fs.def.native.encode]

For narrow character strings, the operating system dependent current encoding for path names. For wide character strings, the implementation defined execution wide-character set encoding (C++14 §2.3).

4.11 native pathname format [fs.def.native]

The operating system dependent pathname format accepted by the host operating system.

4.12 NTCTS [fs.def.ntcts]

Acronym for "null-terminated character-type sequence". Describes a sequence of values of a given encoded character type terminated by that type's null character. If the encoded character type is EcharT, the null character can be constructed by EcharT().

4.13 operating system dependent behavior [fs.def.osdep]

Behavior that is dependent upon the behavior and characteristics of an operating system. See [fs.conform.os].

4.14 parent directory [fs.def.parent]

When discussing a given directory, the directory that both contains a directory entry for the given directory and is represented by the pathname filename dot-dot in the given directory.

When discussing other types of files, a directory containing a directory entry for the file under discussion.

This concept does not apply to dot and dot-dot.

4.15 path [fs.def.path]

A sequence of elements that identify the location of a file within a filesystem. The elements are the root-nameopt, root-directoryopt, and an optional sequence of filenames. The maximum number of elements in the sequence is operating system dependent.

4.16 pathname [fs.def.pathname]

A character string that represents the name of a path. Pathnames are formatted according to the generic pathname format grammar (8.1) or an operating system dependent native pathname format.

4.17 pathname resolution [fs.def.pathres]

Pathname resolution is the operating system dependent mechanism for resolving a pathname to a particular file in a file hierarchy. There may be multiple pathnames that resolve to the same file.  [Example: POSIX specifies the mechanism in section 4.11, Pathname resolution. —end example]

4.18 relative path [fs.def.relative-path]

A path that is not absolute, and so only unambiguously identifies the location of a file when resolved relative to an implied starting location. The elements of a path that determine if it is relative are operating system dependent.  [Note: Paths Pathnames "." and ".." are relative paths. —end note]

4.19 symbolic link [fs.def.symlink]

A link (4.9) type of file with the property that when the file is encountered during pathname resolution, a string stored by the file is used to modify the pathname resolution.

[Note: Symbolic links are often called symlinks. A symbolic link can be thought of as a raw pointer to a file. If the file pointed to does not exist, the symbolic link is said to be a "dangling" symbolic link. —end note]

5 Requirements [fs.req]

Throughout this Technical Specification, char, wchar_t, char16_t, and char32_t are collectively called encoded character types.

Template parameters named EcharT shall be one of the encoded character types.

Template parameters named InputIterator shall meet the C++ Standard's library input iterator requirements (C++14 §24.2.3) and shall have a value type that is one of the encoded character types.

[Note: Use of an encoded character type implies an associated encoding. Since signed char and unsigned char have no implied encoding, they are not included as permitted types. —end note]

Template parameters named Allocator shall meet the C++ Standard's library Allocator requirements (C++14 §17.6.3.5).

5.1 Namespaces and headers [fs.req.namespace]

The components described in this technical specification are experimental and not part of the C++ standard library. All components described in this technical specification are declared in namespace std::experimental::filesystem::v1 or a sub-namespace thereof unless otherwise specified. The header described in this technical specification shall import the contents of std::experimental::filesystem::v1 into std::experimental::filesystem as if by

namespace std {
  namespace experimental {
    namespace filesystem {
      inline namespace v1 {}
    }
  }
}

Unless otherwise specified, references to other entities described in this technical specification are assumed to be qualified with std::experimental::filesystem::v1::, and references to entities described in the C++ standard are assumed to be qualified with std::.

5.2 Feature test macros [fs.req.macros]

This macro allows users to determine which version of this Technical Specification is supported by header <experimental/filesystem>.

Header <experimental/filesystem> shall supply the following macro definition:

#define __cpp_lib_experimental_filesystem     201406

[Note: The value of macro __cpp_lib_experimental_filesystem is yyyymm where yyyy is the year and mm the month when the version of the Technical Specification was completed. — end note]

6 Header <experimental/filesystem> synopsis [fs.filesystem.synopsis]

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

    class path;
    
    void swap(path& lhs, path& rhs) noexcept;
    size_t hash_value(const path& p) noexcept;

    bool operator==(const path& lhs, const path& rhs) noexcept;
    bool operator!=(const path& lhs, const path& rhs) noexcept;
    bool operator< (const path& lhs, const path& rhs) noexcept;
    bool operator<=(const path& lhs, const path& rhs) noexcept;
    bool operator> (const path& lhs, const path& rhs) noexcept;
    bool operator>=(const path& lhs, const path& rhs) noexcept;

    path operator/ (const path& lhs, const path& rhs);

    template <class charT, class traits>
    basic_ostream<charT, traits>&
    operator<<(basic_ostream<charT, traits>& os, const path& p);

    template <class charT, class traits>
    basic_istream<charT, traits>&
    operator>>(basic_istream<charT, traits>& is, path& p);

    template <class Source>  
      path u8path(Source constconst Source& source);
    template <class InputIterator>
      path u8path(InputIterator first, InputIterator last);

    class filesystem_error;      
    class directory_entry;

    class directory_iterator;

    // enable directory_iterator range-based for statements
    directory_iterator begin(directory_iterator iter) noexcept;
    directory_iterator end(const directory_iterator&) noexcept;

    class recursive_directory_iterator;

    // enable recursive_directory_iterator range-based for statements
    recursive_directory_iterator begin(recursive_directory_iterator iter) noexcept;
    recursive_directory_iterator end(const recursive_directory_iterator&) noexcept;

    class file_status;

    struct space_info
    {
      uintmax_t capacity;
      uintmax_t free; 
      uintmax_t available;
    };

    enum class file_type;
    enum class perms;
    enum class copy_options;
    enum class directory_options;
    {
      none,
      follow_directory_symlink,
      skip_permission_denied
    };

    typedef chrono::time_point<trivial-clock>  file_time_type;

    // operational functions

    path         absolute(const path& p, const path& base=current_path());

    path         canonical(const path& p, const path& base = current_path());
    path         canonical(const path& p, error_code& ec);
    path         canonical(const path& p, const path& base, error_code& ec);

    void         copy(const path& from, const path& to);
    void         copy(const path& from, const path& to, error_code& ec) noexcept;
    void         copy(const path& from, const path& to, copy_options options);
    void         copy(const path& from, const path& to, copy_options options,  
                   error_code& ec) noexcept;

    bool         copy_file(const path& from, const path& to);
    bool         copy_file(const path& from, const path& to, error_code& ec) noexcept;
    bool         copy_file(const path& from, const path& to, copy_options option);
    bool         copy_file(const path& from, const path& to, copy_options option,
                           error_code& ec) noexcept;

    void         copy_symlink(const path& existing_symlink, const path& new_symlink);
    void         copy_symlink(const path& existing_symlink, const path& new_symlink,
                              error_code& ec) noexcept;

    bool         create_directories(const path& p);
    bool         create_directories(const path& p, error_code& ec) noexcept;

    bool         create_directory(const path& p);
    bool         create_directory(const path& p, error_code& ec) noexcept;

    bool         create_directory(const path& p, const path& attributes);
    bool         create_directory(const path& p, const path& attributes,
                                  error_code& ec) noexcept;

    void         create_directory_symlink(const path& to, const path& new_symlink);
    void         create_directory_symlink(const path& to, const path& new_symlink,
                                          error_code& ec) noexcept;

    void         create_hard_link(const path& to, const path& new_hard_link);
    void         create_hard_link(const path& to, const path& new_hard_link,
                                  error_code& ec) noexcept;

    void         create_symlink(const path& to, const path& new_symlink);
    void         create_symlink(const path& to, const path& new_symlink,
                                error_code& ec) noexcept;

    path         current_path();
    path         current_path(error_code& ec);
    void         current_path(const path& p);
    void         current_path(const path& p, error_code& ec) noexcept;

    bool         exists(file_status s) noexcept;
    bool         exists(const path& p);
    bool         exists(const path& p, error_code& ec) noexcept;

    bool         equivalent(const path& p1, const path& p2);
    bool         equivalent(const path& p1, const path& p2, error_code& ec) noexcept;

    uintmax_t    file_size(const path& p);
    uintmax_t    file_size(const path& p, error_code& ec) noexcept;

    uintmax_t    hard_link_count(const path& p);
    uintmax_t    hard_link_count(const path& p, error_code& ec) noexcept;

    bool         is_block_file(file_status s) noexcept;
    bool         is_block_file(const path& p);
    bool         is_block_file(const path& p, error_code& ec) noexcept;

    bool         is_character_file(file_status s) noexcept;
    bool         is_character_file(const path& p);
    bool         is_character_file(const path& p, error_code& ec) noexcept;

    bool         is_directory(file_status s) noexcept;
    bool         is_directory(const path& p);
    bool         is_directory(const path& p, error_code& ec) noexcept;

    bool         is_empty(const path& p);
    bool         is_empty(const path& p, error_code& ec) noexcept;

    bool         is_fifo(file_status s) noexcept;
    bool         is_fifo(const path& p);
    bool         is_fifo(const path& p, error_code& ec) noexcept;

    bool         is_other(file_status s) noexcept;
    bool         is_other(const path& p);
    bool         is_other(const path& p, error_code& ec) noexcept;

    bool         is_regular_file(file_status s) noexcept; 
    bool         is_regular_file(const path& p);
    bool         is_regular_file(const path& p, error_code& ec) noexcept;

    bool         is_socket(file_status s) noexcept;
    bool         is_socket(const path& p);
    bool         is_socket(const path& p, error_code& ec) noexcept;

    bool         is_symlink(file_status s) noexcept;
    bool         is_symlink(const path& p);
    bool         is_symlink(const path& p, error_code& ec) noexcept;

    file_time_type  last_write_time(const path& p);
    file_time_type  last_write_time(const path& p, error_code& ec) noexcept;
    void         last_write_time(const path& p, file_time_type new_time);
    void         last_write_time(const path& p, file_time_type new_time,
                                 error_code& ec) noexcept;
                                 
    void         permissions(const path& p, perms prms);
    void         permissions(const path& p, perms prms, error_code& ec) noexcept;

    path         read_symlink(const path& p);
    path         read_symlink(const path& p, error_code& ec);

    bool         remove(const path& p);
    bool         remove(const path& p, error_code& ec) noexcept;

    uintmax_t    remove_all(const path& p);
    uintmax_t    remove_all(const path& p, error_code& ec) noexcept;

    void         rename(const path& from, const path& to);
    void         rename(const path& from, const path& to, error_code& ec) noexcept;

    void         resize_file(const path& p, uintmax_t size);
    void         resize_file(const path& p, uintmax_t size, error_code& ec) noexcept;

    space_info   space(const path& p);
    space_info   space(const path& p, error_code& ec) noexcept;

    file_status  status(const path& p);
    file_status  status(const path& p, error_code& ec) noexcept;

    bool         status_known(file_status s) noexcept;

    file_status  symlink_status(const path& p);
    file_status  symlink_status(const path& p, error_code& ec) noexcept;

    path         system_complete(const path& p);
    path         system_complete(const path& p, error_code& ec);

    path         temp_directory_path();
    path         temp_directory_path(error_code& ec);

} } } }  // namespaces std::experimental::filesystem::v1

trivial-clock is an implementation-defined type that satisfies the TrivialClock requirements (C++14 §20.12.3) and that is capable of representing and measuring file time values. Implementations should ensure that the resolution and range of file_time_type reflect the operating system dependent resolution and range of file time values.

7 Error reporting [fs.err.report]

Filesystem library functions often provide two overloads, one that throws an exception to report file system errors, and another that sets an error_code.

[Note: This supports two common use cases:

—end note]

Functions not having an argument of type error_code& report errors as follows, unless otherwise specified:

Functions having an argument of type error_code& report errors as follows, unless otherwise specified:

8 Class path [class.path]

An object of class path represents a path (4.15) and contains a pathname (4.16). Such an object is concerned only with the lexical and syntactic aspects of a path. The path does not necessarily exist in external storage, and the pathname is not necessarily valid for the current operating system or for a particular file system.

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

      class path
      {
      public:
        typedef see below                      value_type;
        typedef basic_string<value_type>       string_type;
        static constexpr value_type            preferred_separator = see below;

        // constructors and destructor
        path() noexcept;
        path(const path& p);
        path(path&& p) noexcept;
        template <class Source>
          path(Source constconst Source& source);
        template <class InputIterator>
          path(InputIterator first, InputIterator last);
        template <class Source>  
          path(Source constconst Source& source, const locale& loc);
        template <class InputIterator>
          path(InputIterator first, InputIterator last, const locale& loc);
        ~path();

        // assignments
        path& operator=(const path& p);
        path& operator=(path&& p) noexcept;
        template <class Source>
          path& operator=(Source constconst Source& source);
        template <class Source>
          path& assign(Source constconst Source& source)
        template <class InputIterator>
          path& assign(InputIterator first, InputIterator last);

        // appends
        path& operator/=(const path& p);
        template <class Source>
          path& operator/=(Source constconst Source& source);
        template <class Source>
          path& append(Source constconst Source& source);
        template <class InputIterator>
          path& append(InputIterator first, InputIterator last);

        // concatenation
        path& operator+=(const path& x);
        path& operator+=(const string_type& x);
        path& operator+=(const value_type* x);
        path& operator+=(value_type x);
        template <class Source>
          path& operator+=(Source constconst Source& x);
        template <class EcharT>
          path& operator+=(EcharT x);
        template <class Source>
          path& concat(Source constconst Source& x);
        template <class InputIterator>
          path& concat(InputIterator first, InputIterator last);
        
        // modifiers
        void  clear() noexcept;
        path& make_preferred();
        path& remove_filename();
        path& replace_filename(const path& replacement);
        path& replace_extension(const path& replacement = path());
        void  swap(path& rhs) noexcept;

        // native format observers
        const string_type&  native() const noexcept;
        const value_type*   c_str() const noexcept;
        operator string_type() const;

        template <class EcharT, class traits = char_traits<EcharT>,
                  class Allocator = allocator<EcharT> >
        basic_string<EcharT, traits, Allocator>
          string(const Allocator& a = Allocator()) const;
        std::string    string() const;
        std::wstring   wstring() const;
        std::string    u8string() const;
        std::u16string u16string() const;
        std::u32string u32string() const;

        // generic format observers
        template <class EcharT, class traits = char_traits<EcharT>,
                  class Allocator = allocator<EcharT> >
        basic_string<EcharT, traits, Allocator>
          generic_string(const Allocator& a = Allocator()) const;
        std::string    generic_string() const;
        std::wstring   generic_wstring() const;
        std::string    generic_u8string() const;
        std::u16string generic_u16string() const;
        std::u32string generic_u32string() const;

        // compare
        int  compare(const path& p) const noexcept;
        int  compare(const string_type& s) const;
        int  compare(const value_type* s) const;

        // decomposition
        path root_name() const;
        path root_directory() const;
        path root_path() const;
        path relative_path() const;
        path parent_path() const;
        path filename() const;
        path stem() const;
        path extension() const;

        // query
        bool empty() const noexcept;
        bool has_root_name() const;
        bool has_root_directory() const;
        bool has_root_path() const;
        bool has_relative_path() const;
        bool has_parent_path() const;
        bool has_filename() const;
        bool has_stem() const;
        bool has_extension() const;
        bool is_absolute() const;
        bool is_relative() const;

        // iterators
        class iterator;
        typedef iterator const_iterator;

        iterator begin() const;
        iterator end() const;

      private:
        string_type pathname;  // exposition only
      };

} } } }  // namespaces std::experimental::filesystem::v1

value_type is a typedef for the operating system dependent encoded character type used to represent pathnames.

The value of preferred_separator is the operating system dependent preferred-separator character (8.1).

[Example: For POSIX based operating systems, value_type is char and preferred_separator is the slash character (/).  For Windows based operating systems, value_type is wchar_t and preferred_separator is the backslash character (\).  —end example]

8.1 path generic pathname format grammar [path.generic]

pathname:
            root-name root-directoryopt relative-pathopt
              
root-directory relative-pathopt
              
relative-path

root-name:
           
An operating system dependent name that identifies the starting location for absolute paths.

[Note: Many operating systems define a name beginning with two directory-separator characters as a root-name that identifies network or other resource locations. Some operating systems define a single letter followed by a colon as a drive specifier - a root-name identifying a specific device such as a disc drive. —end note]

root-directory:
            directory-separator

relative-path:
            filename
            relative-path directory-separator
            relative-path directory-separator filename

filename:
            name
            dot
            dot-dot

name:
           
A sequence of characters other than directory-separator characters.

[Note: Operating systems often place restrictions on the characters that may be used in a filename. For wide portability, users may wish to limit filename characters to the POSIX Portable Filename Character Set:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 . _ -


—end note
]

dot:
           
The filename consisting solely of a single period character (.).

dot-dot:
           
The filename consisting solely of two period characters (..).

directory-separator:
            slash
            slash directory-separator
            preferred-separator
            preferred-separator directory-separator

preferred-separator:
           
An operating system dependent directory separator character. May be a synonym for slash.

slash:
          
The slash character (/).

Multiple successive directory-separator characters are considered to be the same as one directory-separator character.

The filename dot is treated as a reference to the current directory. The filename dot-dot is treated as a reference to the parent directory. What the filename dot-dot refers to relative to root-directory is implementation-defined. Specific filenames may have special meanings for a particular operating system.

8.2 path conversions [path.cvt]

8.2.1 path argument format conversions [path.fmt.cvt]

[Note: The format conversions described in this section are not applied on POSIX or Windows based operating systems because on these systems:

 —end note]

Functions arguments that take character sequences representing paths may use the generic pathname format grammar (8.1) or the native pathname format (4.11). If and only if such arguments are in the generic format and the generic format is not acceptable to the operating system as a native path, conversion to native format shall be performed during the processing of the argument.

[Note: Some operating systems may have no unambiguous way to distinguish between native format and generic format arguments. This is by design as it simplifies use for operating systems that do not require disambiguation. An implementation for an operating system where disambiguation is required is permitted as an extension to distinguish between the formats. —end note]

If the native format requires paths for regular files to be formatted differently from paths for directories, the path shall be treated as a directory path if last element is directory-separator, otherwise it shall be treated as a regular file path.

8.2.2 path type and encoding conversions [path.type.cvt]

For member function arguments that take character sequences representing paths and for member functions returning strings, value type and encoding conversion is performed if the value type of the argument or return differs from path::value_type. Encoding and method of conversion for the argument or return value to be converted to is determined by its value type:

If the encoding being converted to has no representation for source characters, the resulting converted characters, if any, are unspecified.

8.3 path requirements [path.req]

In addition to the requirements (5), function template parameters named Source shall be one of:

[Note: See path conversions (8.2) for how these value types and their encodings convert to path::value_type and its encoding. —end note]

Arguments of type Source shall not be null pointers.

8.4 path members  [path.member]

8.4.1 path constructors [path.construct]

path() noexcept;

Effects: Constructs an object of class path.

Postconditions: empty().

path(const path& p);
path(path&& p) noexcept;

Effects: Constructs an object of class path with pathname having the original value of p.pathname. In the second form, p is left in a valid but unspecified state.

template <class Source>
  path(Source constconst Source& source);
template <class InputIterator>
  path(InputIterator first, InputIterator last);

Effects: Constructs an object of class path, storing the effective range of source (8.3) or the range [first,last) in pathname, converting format and encoding if required (8.2.1).

template <class Source>
  path(Source constconst Source& source, const locale& loc);
template <class InputIterator>
  path(InputIterator first, InputIterator last, const locale& loc);

Requires: The value type of Source and InputIterator is char.

Effects: Constructs an object of class path, storing the effective range of source or the range [first,last) in pathname, after converting format if required and after converting the encoding as follows:

If value_type is wchar_t, converts to the native wide encoding (4.10) using the codecvt<wchar_t, char, mbstate_t> facet of loc. Otherwise a conversion is performed using the codecvt<wchar_t, char, mbstate_t> facet of loc, and then a second conversion to the current narrow encoding.

[Example:

A string is to be read from a database that is encoded in ISO/IEC 8859-1, and used to create a directory:

namespace fs = std::experimental::filesystem;
std::string latin1_string = read_latin1_data();
codecvt_8859_1<wchar_t> latin1_facet;
std::locale latin1_locale(std::locale(), latin1_facet);
fs::create_directory(fs::path(latin1_string, latin1_locale));

For POSIX based operating systems the path is constructed by first using latin1_facet to convert ISO/IEC 8859-1 encoded latin1_string to a wide character string in the native wide encoding (4.10). The resulting wide string is then converted to a narrow character pathname string in the current native narrow encoding. If the native wide encoding is UTF-16 or UTF-32, and the current native narrow encoding is UTF-8, all of the characters in the ISO/IEC 8859-1 character set will be converted to their Unicode representation, but for other native narrow encodings some characters may have no representation.

For Windows based operating systems the path is constructed by using latin1_facet to convert ISO/IEC 8859-1 encoded latin1_string to a UTF-16 encoded wide character pathname string. All of the characters in the ISO/IEC 8859-1 character set will be converted to their Unicode representation.

—end example]

8.4.2 path assignments [path.assign]

path& operator=(const path& p);

Effects: If *this and p are the same object, has no effect. Otherwise, modifies pathname to have the original value of p.pathname.

Returns: *this

path& operator=(path&& p) noexcept;

Effects: If *this and p are the same object, has no effect. Otherwise, modifies pathname to have the original value of p.pathnamep is left in a valid but unspecified state. [Note: A valid implementation is swap(p). —end note]

Returns: *this

template <class Source>
  path& operator=(Source constconst Source& source);
template <class Source>
  path& assign(Source constconst Source& source);
template <class InputIterator>
  path& assign(InputIterator first, InputIterator last);

Effects: Stores the effective range of source (8.3) or the range [first,last) in pathname, converting format and encoding if required (8.2.1).

Returns: *this

8.4.3 path appends [path.append]

The append operations use operator/= to denote their semantic effect of appending preferred-separator when needed.

path& operator/=(const path& p);

Effects:

Appends path::preferred_separator to pathname unless:

Then appends p.native() to pathname.

Returns: *this

template <class Source>
  path& operator/=(Source constconst Source& source);
template <class Source>
  path& append(Source constconst Source& source);
template <class InputIterator>
  path& append(InputIterator first, InputIterator last);

Effects:

Appends path::preferred_separator to pathname, converting format and encoding if required (8.2.1), unless:

Appends the effective range of source (8.3) or the range [first,last) to pathname, converting format and encoding if required (8.2.1).

Returns: *this

8.4.4 path concatenation [path.concat]

path& operator+=(const path& x);
path& operator+=(const string_type& x);
path& operator+=(const value_type* x);
path& operator+=(value_type x);
template <class Source>
  path& operator+=(Source constconst Source& x);
template <class EcharT>
  path& operator+=(EcharT x);
template <class Source>
  path& concat(Source constconst Source& x);
template <class InputIterator>
  path& concat(InputIterator first, InputIterator last);

Postcondition: native() == prior_native + effective-argument, where prior_native is native() prior to the call to operator+=, and effective-argument is:

If the value type of effective-argument would not be path::value_type, the actual argument or argument range is first converted (8.2.1) so that effective-argument has value type path::value_type.

Returns: *this

8.4.5 path modifiers [path.modifiers]

void clear() noexcept;

Postcondition: empty()

path& make_preferred();

Effects: Each directory-separator is converted to preferred-separator.

Returns: *this

[Example:

path p("foo/bar");
std::cout << p << '\n';
p.make_preferred();
std::cout << p << '\n';

On an operating system where preferred-separator is the same as directory-separator, the output is:

"foo/bar"
"foo/bar"

On an operating system where preferred-separator is a backslash, the output is:

"foo/bar"
"foo\bar"

—end example]

path& remove_filename();

Postcondition: !has_filename().

Returns: *this.

[Example:

std::cout << path("/foo").remove_filename();  // outputs "/"
std::cout << path("/").remove_filename();     // outputs ""

—end example]

path& replace_filename(const path& replacement);

Effects:

remove_filename();
operator/=(replacement);

Returns: *this.

[Example:

std::cout << path("/foo").replace_filename("bar");  // outputs "/bar"
std::cout << path("/").replace_filename("bar");     // outputs "bar"

—end example]

path& replace_extension(const path& replacement = path());

Effects:

Returns: *this

void swap(path& rhs) noexcept;

Effects: Swaps the contents of the two paths.

Complexity: constant time.

8.4.6 path native format observers [path.native.obs]

The string returned by all native format observers is in the native pathname format.

const string_type&  native() const noexcept;

Returns: pathname.

const value_type* c_str() const noexcept;

Returns: pathname.c_str().

operator string_type() const;

Returns: pathname.

[Note: Conversion to string_type is provided so that an object of class path can be given as an argument to existing standard library file stream constructors and open functions. This provides basic interoperability without the need to modify existing standard library classes or headers. —end note]

template <class EcharT, class traits = char_traits<EcharT>,
          class Allocator = allocator<EcharT> >
basic_string<EcharT, traits, Allocator>
  string(const Allocator& a = Allocator()) const;

Returns: pathname.

Remarks: All memory allocation, including for the return value, shall be performed by a. Conversion, if any, is specified by 8.2.

std::string string() const;
std::wstring wstring() const;
std::string u8string() const;
std::u16string u16string() const;
std::u32string u32string() const; 

Returns: pathname.

Remarks: Conversion, if any, is performed as specified by 8.2. The encoding of the string returned by u8string() is always UTF-8.

8.4.7 path generic format observers [path.generic.obs]

Generic format observer functions return strings formatted according to the generic pathname format (8.1). The forward slash ('/') character is used as the directory-separator character.

[Example: On an operating system that uses backslash as its preferred-separator,  path("foo\\bar").generic_string() returns "foo/bar". —end example]

template <class EcharT, class traits = char_traits<EcharT>,
          class Allocator = allocator<EcharT> >
basic_string<EcharT, traits, Allocator>
  generic_string(const Allocator& a = Allocator()) const;

Returns: pathname, reformatted according to the generic pathname format (8.1).

Remarks: All memory allocation, including for the return value, shall be performed by a. Conversion, if any, is specified by 8.2.

std::string generic_string() const;
std::wstring generic_wstring() const;
std::string generic_u8string() const;
std::u16string generic_u16string() const;
std::u32string generic_u32string() const; 

Returns: pathname, reformatted according to the generic pathname format (8.1).

Remarks:  Conversion, if any, is specified by 8.2. The encoding of the string returned by generic_u8string() is always UTF-8.

8.4.8 path compare [path.compare]

int compare(const path& p) const noexcept;

Returns: A value less than 0 if native() for the elements of *this are lexicographically less than native() for the elements of p, otherwise a value greater than 0 if native() for the elements of *this are lexicographically greater than native() for the elements of p, otherwise 0.

Remark: The elements are determined as if by iteration over the half-open range [begin(), end()) for *this and  p.

int compare(const string_type& s) const

Returns: compare(path(s)).

int compare(const value_type* s) const

Returns: compare(path(s)).

8.4.9 path decomposition [path.decompose]

path root_name() const;

Returns: root-name, if pathname includes root-name, otherwise path().

path root_directory() const;

Returns: root-directory, if pathname includes root-directory, otherwise path().

If root-directory is composed of slash name, slash is excluded from the returned string.

path root_path() const;

Returns: root_name() / root_directory()

path relative_path() const;

Returns: A path composed from pathname, if !empty(), beginning with the first filename after root-path. Otherwise, path().

path parent_path() const;

Returns: (empty() || begin() == --end()) ? path() : pp, where pp is constructed as if by starting with an empty path and successively applying operator/= for each element in the range [begin(), --end()).

path filename() const;

Returns: empty() ? path() : *--end()

[Example:

std::cout << path("/foo/bar.txt").filename(); // outputs "bar.txt"
std::cout << path("/").filename();            // outputs "/"
std::cout << path(".").filename();            // outputs "."
std::cout << path("..").filename();           // outputs ".."

—end example]

path stem() const;

Returns: if filename() contains a period but does not consist solely of one or two periods, returns the substring of filename() starting at its beginning and ending with the character before the last period. Otherwise, returns filename().

[Example:

std::cout << path("/foo/bar.txt").stem(); // outputs "bar"
path p = "foo.bar.baz.tar";
for (; !p.extension().empty(); p = p.stem())
  std::cout << p.extension() << '\n';
  // outputs: .tar
  //          .baz
  //          .bar

—end example]

path extension() const;

Returns: if filename() contains a period but does not consist solely of one or two periods, returns the substring of filename() starting at the rightmost period and for the remainder of the path. Otherwise, returns an empty path object.

Remarks: Implementations are permitted to define additional behavior for file systems which append additional elements to extensions, such as alternate data streams or partitioned dataset names.

[Example:

std::cout << path("/foo/bar.txt").extension(); // outputs ".txt"

—end example]

[Note: The period is included in the return value so that it is possible to distinguish between no extension and an empty extension. Also note that for a path p, p.stem()+p.extension() == p.filename(). —end note]

8.4.10 path query [path.query]

bool empty() const noexcept;

Returns: pathname.empty().

bool has_root_path() const;

Returns: !root_path().empty()

bool has_root_name() const;

Returns: !root_name().empty()

bool has_root_directory() const;

Returns: !root_directory().empty()

bool has_relative_path() const;

Returns: !relative_path().empty()

bool has_parent_path() const;

Returns: !parent_path().empty()

bool has_filename() const;

Returns: !filename().empty()

bool has_stem() const;

Returns: !stem().empty()

bool has_extension() const;

Returns: !extension().empty()

bool is_absolute() const;

Returns: true if pathname contains an absolute path (4.1), else false.

[Example: path("/").is_absolute() is true for POSIX based operating systems, and false for Windows based operating systems.  —end example]

bool is_relative() const;

Returns: !is_absolute().

8.5 path iterators [path.itr]

Path iterators iterate over the elements of the stored pathname.

A path::iterator is a constant iterator satisfying all the requirements of a bidirectional iterator (C++14 §24.1.4 Bidirectional iterators). Its value_type is path.

Calling any non-const member function of a path object invalidates all iterators referring to elements of that object.

The forward traversal order is as follows:

The backward traversal order is the reverse of forward traversal.

iterator begin() const;

Returns: An iterator for the first present element in the traversal list above. If no elements are present, the end iterator.

iterator end() const;

Returns: The end iterator.

8.6 path non-member functions [path.non-member]

void swap(path& lhs, path& rhs) noexcept;

Effects: lhs.swap(rhs).

size_t hash_value (const path& p) noexcept;

Returns: A hash value for the path p. If for two paths, p1 == p2 then hash_value(p1) == hash_value(p2).

bool operator< (const path& lhs, const path& rhs) noexcept;

Returns: return lhs.compare(rhs) < 0.

bool operator<=(const path& lhs, const path& rhs) noexcept;

Returns: !(rhs < lhs).

bool operator> (const path& lhs, const path& rhs) noexcept;

Returns: rhs < lhs.

bool operator>=(const path& lhs, const path& rhs) noexcept;

Returns: !(lhs < rhs).

bool operator==(const path& lhs, const path& rhs) noexcept;

Returns: !(lhs < rhs) && !(rhs < lhs).

[Note: Path equality and path equivalence have different semantics.

Equality is determined by the path non-member operator==, which considers the two path's lexical representations only. Thus path("foo") == "bar" is never true.

Equivalence is determined by the equivalent() non-member function, which determines if two paths resolve to the same file system entity. Thus equivalent("foo", "bar") will be true when both paths resolve to the same file.

Programmers wishing to determine if two paths are "the same" must decide if "the same" means "the same representation" or "resolve to the same actual file", and choose the appropriate function accordingly. —end note]

bool operator!=(const path& lhs, const path& rhs) noexcept;

Returns: !(lhs == rhs).

path operator/ (const path& lhs, const path& rhs);

Returns: path(lhs) /= rhs.

8.6.1 path inserter and extractor [path.io]

template <class charT, class traits>
basic_ostream<charT, traits>&
operator<<(basic_ostream<charT, traits>& os, const path& p);

Effects: os << quoted(p.string<charT, traits>()).

[Note: The quoted function is described in ISO 14882:2014 C++14 §27.7.6. — end note]

Returns: os

template <class charT, class traits>
basic_istream<charT, traits>&
operator>>(basic_istream<charT, traits>& is, path& p);

Effects: 

basic_string<charT, traits> tmp;
is >> quoted(tmp);
p = tmp;

Returns: is

8.6.2 path factory functions [path.factory]

template <class Source>  
  path u8path(Source constconst Source& source);
template <class InputIterator>
  path u8path(InputIterator first, InputIterator last);

Requires: The source and [first,last) sequences are UTF-8 encoded. The value type of Source and InputIterator is char.

Returns:

Remarks: Argument format conversion (8.2.1) applies to the arguments for these functions. How Unicode encoding conversions are performed is unspecified.

[Example:

A string is to be read from a database that is encoded in UTF-8, and used to create a directory using the native encoding for filenames:

namespace fs = std::experimental::filesystem;
std::string utf8_string = read_utf8_data();
fs::create_directory(fs::u8path(utf8_string));

For POSIX based operating systems with the native narrow encoding set to UTF-8, no encoding or type conversion occurs.

For POSIX based operating systems with the native narrow encoding not set to UTF-8, a conversion to UTF-32 occurs, followed by a conversion to the current native narrow encoding. Some Unicode characters may have no native character set representation.

For Windows based operating systems a conversion from UTF-8 to UTF-16 occurs.

—end example]

9 Class filesystem_error [class.filesystem_error]

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

      class filesystem_error : public system_error
      {
      public:
        filesystem_error(const string& what_arg, error_code ec);
        filesystem_error(const string& what_arg,
          const path& p1, error_code ec);
        filesystem_error(const string& what_arg,
          const path& p1, const path& p2, error_code ec);

        const path& path1() const noexcept;
        const path& path2() const noexcept;
        const char* what() const noexcept;
      };
} } } }  // namespaces std::experimental::filesystem::v1

The class filesystem_error defines the type of objects thrown as exceptions to report file system errors from functions described in this Technical Specification.

9.1 filesystem_error members [filesystem_error.members]

Constructors are provided that store zero, one, or two paths associated with an error.

filesystem_error(const string& what_arg, error_code ec);

Postcondition:

Expression Value
runtime_error::what() what_arg.c_str()
code() ec
path1().empty() true
path2().empty() true
filesystem_error(const string& what_arg, const path& p1, error_code ec);

Postcondition:

Expression Value
runtime_error::what() what_arg.c_str()
code() ec
path1() Reference to stored copy of p1
path2().empty() true
filesystem_error(const string& what_arg, const path& p1, const path& p2, error_code ec);

Postcondition:

Expression Value
runtime_error::what() what_arg.c_str()
code() ec
path1() Reference to stored copy of p1
path2() Reference to stored copy of p2
const path& path1() const noexcept;

Returns: Reference to copy of p1 stored by the constructor, or, if none, an empty path.

const path& path2() const noexcept;

Returns: Reference to copy of p2 stored by the constructor, or, if none, an empty path.

const char* what() const noexcept;

Returns: A string containing runtime_error::what(). The exact format is unspecified. Implementations are encouraged but not required to include path1.native_string()if not empty, path2.native_string()if not empty, and system_error::what() strings in the returned string.

10 Enumerations  [fs.enum]

10.1 Enum class file_type [enum.file_type]

This enum class specifies constants used to identify file types.

Constant Name Value Meaning
none 0 The type of the file has not been determined or an error occurred while trying to determine the type.
not_found -1 Pseudo-type indicating the file was not found. [Note: The file not being found is not considered an error while determining the type of a file. —end note]
regular 1 Regular file
directory 2 Directory file
symlink 3 Symbolic link file
block 4 Block special file
character 5 Character special file
fifo 6 FIFO or pipe file
socket 7 Socket file
unknown 8 The file does exist, but is of an operating system dependent type not covered by any of the other cases or the process does not have permission to query the file type

10.2 Enum class copy_options [enum.copy_options]

The enum class type copy_options is a bitmask type (C++14 §17.5.2.1.3) that specifies bitmask constants used to control the semantics of copy operations.  The constants are specified in option groups. Constant none is shown in each option group for purposes of exposition; implementations shall provide only a single definition.  Calling a Filesystem library function with more than a single constant for an option group results in undefined behavior.

Option group controlling copy_file function effects for existing target files
Constant Value Meaning
none 0 (Default) Error; file already exists.
skip_existing 1 Do not overwrite existing file, do not report an error.
overwrite_existing 2 Overwrite the existing file.
update_existing 4 Overwrite the existing file if it is older than the replacement file.
Option group controlling copy function effects for sub-directories
Constant Value Meaning
none 0 (Default) Do not copy sub-directories.
recursive 8 Recursively copy sub-directories and their contents.
Option group controlling copy function effects for symbolic links
Constant Value Meaning
none 0 (Default) Follow symbolic links.
copy_symlinks 16 Copy symbolic links as symbolic links rather than copying the files that they point to.
skip_symlinks 32 Ignore symbolic links.
Option group controlling copy function effects for choosing the form of copying
Constant Value Meaning
none 0 (Default) Copy content.
directories_only 64 Copy directory structure only, do not copy non-directory files.
create_symlinks 128 Make symbolic links instead of copies of files. The source path shall be an absolute path unless the destination path is in the current directory.
create_hard_links 256 Make hard links instead of copies of files.

10.3 Enum class perms [enum.perms]

The enum class type perms is a bitmask type (C++14 §17.5.2.1.3) that specifies bitmask constants used to identify file permissions.

Name Value
(octal)
POSIX
macro
Definition or notes
none0 There are no permissions set for the file.
owner_read0400 S_IRUSR Read permission, owner
owner_write0200 S_IWUSR Write permission, owner
owner_exec0100 S_IXUSR Execute/search permission, owner
owner_all0700 S_IRWXU Read, write, execute/search by owner; owner_read | owner_write | owner_exec
group_read040 S_IRGRP Read permission, group
group_write020 S_IWGRP Write permission, group
group_exec010 S_IXGRP Execute/search permission, group
group_all070 S_IRWXG Read, write, execute/search by group; group_read | group_write | group_exec
others_read04 S_IROTH Read permission, others
others_write02 S_IWOTH Write permission, others
others_exec01 S_IXOTH Execute/search permission, others
others_all07 S_IRWXO Read, write, execute/search by others; others_read | others_write | others_exec
all0777 owner_all | group_all | others_all
set_uid04000 S_ISUID Set-user-ID on execution
set_gid02000 S_ISGID Set-group-ID on execution
sticky_bit 01000 S_ISVTX Operating system dependent.
mask07777   all | set_uid | set_gid | sticky_bit
unknown0xFFFF The permissions are not known, such as when a file_status object is created without specifying the permissions
add_perms0x10000  permissions() shall bitwise or the perm argument's permission bits to the file's current permission bits.
remove_perms 0x20000  permissions() shall bitwise and the complement of perm argument's permission bits to the file's current permission bits.
resolve_symlinks 0x40000  permissions() shall resolve symlinks

10.4 Enum class directory_options [enum.directory_options]

The enum class type directory_options is a bitmask type (C++14 §17.5.2.1.3) that specifies bitmask constants used to identify directory traversal options.

Name Value Meaning
none 0 (Default) Skip directory symlinks, permission denied is an error.
follow_directory_symlink 1 Follow rather than skip directory symlinks.
skip_permission_denied 2 Skip directories that would otherwise result in permission denied errors.

11 Class file_status [class.file_status]

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

      class file_status
      {
      public:

        // constructors
        explicit file_status(file_type ft = file_type::none,
                             perms prms = perms::unknown) noexcept;
        file_status(const file_status&) noexcept = default;
        file_status(file_status&&) noexcept = default;
       ~file_status();

        file_status& operator=(const file_status&) noexcept = default;
        file_status& operator=(file_status&&) noexcept = default;

        // observers
        file_type  type() const noexcept;
        perms      permissions() const noexcept;

        // modifiers
        void       type(file_type ft) noexcept;
        void       permissions(perms prms) noexcept;
      };
} } } }  // namespaces std::experimental::filesystem::v1

An object of type file_status stores information about the type and permissions of a file.

11.1 file_status constructors [file_status.cons]

explicit file_status() noexcept;

Postconditions: type() == file_type::none, permissions() == perms::unknown.

explicit file_status(file_type ft, perms prms = perms::unknown) noexcept;

Postconditions: type() == ft, permissions() == prms.

11.2 file_status observers [file_status.obs]

file_type type() const noexcept;

Returns: The value of type() specified by the postconditions of the most recent call to a constructor, operator=, or type(file_type) function.

perms permissions() const noexcept;

Returns: The value of permissions() specified by the postconditions of the most recent call to a constructor, operator=, or permissions(perms) function.

11.3 file_status modifiers [file_status.mods]

void type(file_type ft) noexcept;

Postconditions: type() == ft.

void permissions(perms prms) noexcept;

Postconditions: permissions() == prms.

12 Class directory_entry [class.directory_entry]

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

  class directory_entry
  {
  public:

    // constructors and destructor
    directory_entry() noexcept = default;
    directory_entry(const directory_entry&) = default;
    directory_entry(directory_entry&&) noexcept = default;
    explicit directory_entry(const path& p);
    explicit directory_entry(const path& p, file_status st=file_status(),
      file_status symlink_st=file_status());
    ~directory_entry();

    // modifiers
    directory_entry& operator=(const directory_entry&) = default;
    directory_entry& operator=(directory_entry&&) noexcept = default;
    void assign(const path& p);
    void assign(const path& p, file_status st=file_status(),
      file_status symlink_st=file_status());
    void replace_filename(const path& p);
    void replace_filename(const path& p, file_status st=file_status(),
      file_status symlink_st=file_status());

    // observers
    const path&  path() const noexcept;
    operator const path&() const noexcept;
    file_status  status() const;
    file_status  status(error_code& ec) const noexcept;
    file_status  symlink_status() const;
    file_status  symlink_status(error_code& ec) const noexcept;

    bool operator< (const directory_entry& rhs) const noexcept;
    bool operator==(const directory_entry& rhs) const noexcept;
    bool operator!=(const directory_entry& rhs) const noexcept;
    bool operator<=(const directory_entry& rhs) const noexcept;
    bool operator> (const directory_entry& rhs) const noexcept;
    bool operator>=(const directory_entry& rhs) const noexcept;
    private:
    path                 m_path;           // for exposition only
    mutable file_status  m_status;         // for exposition only; stat()-like
    mutable file_status  m_symlink_status; // for exposition only; lstat()-like
  };

} } } }  // namespaces std::experimental::filesystem::v1  

A directory_entry object stores a path object, a file_status object for non-symbolic link status, and a file_status object for symbolic link status. The file_status objects act as value caches.

[Note: Because status()on a pathname may be a relatively expensive operation, some operating systems provide status information as a byproduct of directory iteration. Caching such status information can result in significant time savings. Cached and non-cached results may differ in the presence of file system races. —end note]

12.1 directory_entry constructors [directory_entry.cons]

explicit directory_entry(const path& p);

Effects: Constructs an object of type directory_entry.

Postcondition: path() == p.

explicit directory_entry(const path& p, file_status st=file_status(),
    file_status symlink_st=file_status());

Postcondition:

Expression Value
path() p
status() st
symlink_status() symlink_st

12.2 directory_entry modifiers [directory_entry.mods]

void assign(const path& p);

Postcondition: path() == p.

void assign(const path& p, file_status st=file_status(),
  file_status symlink_st=file_status());

Postcondition:

Expression Value
path() p
status() st
symlink_status() symlink_st
void replace_filename(const path& p);

Postcondition: path() == x.parent_path() / p where x is the value of path() before the function is called.

void replace_filename(const path& p, file_status st=file_status(),
  file_status symlink_st=file_status());

Postcondition:

Expression Value
path() path().parent_path() / p
status() st
symlink_status() symlink_st

12.3 directory_entry observers [directory_entry.obs]

const path& path() const noexcept;
operator const path&() const noexcept;

Returns: m_path

file_status status() const;
file_status status(error_code& ec) const noexcept;

Effects: As if,

if (!status_known(m_status))
{
  if (status_known(m_symlink_status) && !is_symlink(m_symlink_status))
    { m_status = m_symlink_status; }
  else { m_status = status(m_path[, ec]); }
}

Returns: m_status status(path()[, ec]).

Throws: As specified in Error reporting (7).

file_status  symlink_status() const;
file_status  symlink_status(error_code& ec) const noexcept;

Effects: As if,

        if (!status_known(m_symlink_status))
        {
        m_symlink_status = symlink_status(m_path[, ec]);
        }

Returns: m_symlink_status symlink_status(path()[, ec]).

Throws: As specified in Error reporting (7).

bool operator==(const directory_entry& rhs) const noexcept;

Returns: m_path == rhs.m_path.

[Note: Status members do not participate in determining equality. — end note]

bool operator!=(const directory_entry& rhs) const noexcept;

Returns: m_path != rhs.m_path.

bool operator< (const directory_entry& rhs) const noexcept;

Returns: m_path < rhs.m_path.

bool operator<=(const directory_entry& rhs) const noexcept;

Returns: m_path <= rhs.m_path.

bool operator> (const directory_entry& rhs) const noexcept;

Returns: m_path > rhs.m_path.

bool operator>=(const directory_entry& rhs) const noexcept;

Returns: m_path >= rhs.m_path.

13 Class directory_iterator [class.directory_iterator]

An object of type directory_iterator provides an iterator for a sequence of directory_entry elements representing the files in a directory.  [Note: For iteration into sub-directories,  see class recursive_directory_iterator (14). —end note]

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

      class directory_iterator
      {
      public:
        typedef directory_entry        value_type;
        typedef ptrdiff_t              difference_type;
        typedef const directory_entry* pointer;
        typedef const directory_entry& reference;
        typedef input_iterator_tag     iterator_category;

        // member functions
        directory_iterator() noexcept;
        explicit directory_iterator(const path& p);
        directory_iterator(const path& p, directory_options options);
        directory_iterator(const path& p, error_code& ec) noexcept;
        directory_iterator(const path& p,
          directory_options options, error_code& ec) noexcept;
        directory_iterator(const directory_iterator& rhs) = default;
        directory_iterator(directory_iterator&& rhs) noexcept = default;
       ~directory_iterator();

        directory_iterator& operator=(const directory_iterator& rhs) = default;
        directory_iterator& operator=(directory_iterator&& rhs) noexcept = default;
        
        const directory_entry& operator*() const;
        const directory_entry* operator->() const;
        directory_iterator&    operator++();
        directory_iterator&    increment(error_code& ec) noexcept;

        // other members as required by C++14 §24.1.1 Input iterators 
      };

} } } }  // namespaces std::experimental::filesystem::v1

directory_iterator satisfies the requirements of an input iterator  C++14 §24.2.3).

If an iterator of type directory_iterator is advanced past the last directory element, that iterator shall become equal to the end iterator value. The directory_iterator default constructor shall create an iterator equal to the end iterator value, and this shall be the only valid iterator for the end condition.

The result of operator* on an end iterator is undefined behavior. For any other iterator value a const directory_entry& is returned. The result of operator-> on an end iterator is undefined behavior. For any other iterator value a const directory_entry* is returned.

Two end iterators are always equal. An end iterator shall not be equal to a non-end iterator.

The result of calling the path() member of the directory_entry object obtained by dereferencing a directory_iterator is a reference to a path object composed of the directory argument from which the iterator was constructed with filename of the directory entry appended as if by operator/=.

Directory iteration shall not yield directory entries for the current (dot) and parent (dot-dot) directories.

The order of directory entries obtained by dereferencing successive increments of a directory_iterator is unspecified.

[Note: Programs performing directory iteration may wish to test if the path obtained by dereferencing a directory iterator actually exists. It could be a symbolic link to a non-existent file. Programs recursively walking directory trees for purposes of removing and renaming entries may wish to avoid following symbolic links.

If a file is removed from or added to a directory after the construction of a directory_iterator for the directory, it is unspecified whether or not subsequently incrementing the iterator will ever result in an iterator referencing the removed or added directory entry. See POSIX readdir_r(). —end note]

13.1 directory_iterator members [directory_iterator.members]

directory_iterator() noexcept;

Effects: Constructs the end iterator.

explicit directory_iterator(const path& p);
directory_iterator(const path& p, directory_options options);
directory_iterator(const path& p, error_code& ec) noexcept;
directory_iterator(const path& p,
  directory_options options, error_code& ec) noexcept;

Effects: For the directory that p resolves to, constructs an iterator for the first element in a sequence of directory_entry elements representing the files in the directory, if any; otherwise the end iterator. However, if (options & directory_options::skip_permissions_denied) != directory_options::none and construction encounters an error indicating that permission to access  p is denied, constructs the end iterator and does not report an error.

Throws: As specified in Error reporting (7).

[Note: To iterate over the current directory, use directory_iterator(".") rather than directory_iterator(""). —end note]

directory_iterator(const directory_iterator& rhs);
directory_iterator(directory_iterator&& rhs) noexcept;

Effects: Constructs an object of class directory_iterator.

Postconditions: *this has the original value of rhs.

directory_iterator& operator=(const directory_iterator& rhs);
directory_iterator& operator=(directory_iterator&& rhs) noexcept;

Effects: If *this and rhs are the same object, the member has no effect.

Postconditions: *this has the original value of rhs.

Returns: *this.

directory_iterator& operator++();
directory_iterator& increment(error_code& ec) noexcept;

Effects: As specified by C++14 §24.1.1 Input iterators.

Returns: *this.

Throws: As specified in Error reporting (7).

13.2 directory_iterator non-member functions [directory_iterator.nonmembers]

These functions enable use of directory_iterator with range-based for statements.

directory_iterator begin(directory_iterator iter) noexcept;

Returns: iter.

directory_iterator end(const directory_iterator&) noexcept;

Returns: directory_iterator().

14 Class recursive_directory_iterator [class.rec.dir.itr]

An object of type recursive_directory_iterator provides an iterator for a sequence of directory_entry elements representing the files in a directory and its sub-directories.

namespace std { namespace experimental { namespace filesystem { inline namespace v1 {

      class recursive_directory_iterator 
      {
      public:
        typedef directory_entry        value_type;
        typedef ptrdiff_t              difference_type;
        typedef const directory_entry* pointer;
        typedef const directory_entry& reference;
        typedef input_iterator_tag     iterator_category;

        // constructors and destructor
        recursive_directory_iterator() noexcept;
        explicit recursive_directory_iterator(const path& p,
          directory_options options = directory_options::none);
        recursive_directory_iterator(const path& p, directory_options options);
        recursive_directory_iterator(const path& p,
          directory_options options, error_code& ec) noexcept;
        recursive_directory_iterator(const path& p, error_code& ec) noexcept;
        recursive_directory_iterator(const recursive_directory_iterator& rhs)
          = default;
        recursive_directory_iterator(recursive_directory_iterator&& rhs) noexcept
          = default;
       ~recursive_directory_iterator();

        // observers
        directory_options  options() const;
        int                depth() const;
        bool               recursion_pending() const;

        const directory_entry& operator*() const;
        const directory_entry* operator->() const;

        // modifiers
        recursive_directory_iterator&
          operator=(const recursive_directory_iterator& rhs) = default;
        recursive_directory_iterator&
          operator=(recursive_directory_iterator&& rhs) noexcept = default;

        recursive_directory_iterator& operator++();
        recursive_directory_iterator& increment(error_code& ec) noexcept;

        void pop();
        void disable_recursion_pending();

       // other members as required by C++14 §24.1.1 Input iterators
      
     };

} } } }  // namespaces std::experimental::filesystem::v1

The behavior of a recursive_directory_iterator is the same as a directory_iterator unless otherwise specified.

[Note: If the directory structure being iterated over contains cycles then the end iterator may be unreachable. —end note]

14.1 recursive_directory_iterator members [rec.dir.itr.members]

recursive_directory_iterator() noexcept;

Effects: Constructs the end iterator.

explicit recursive_directory_iterator(const path& p,
  directory_options options = directory_options::none);
recursive_directory_iterator(const path& p, directory_options options);
recursive_directory_iterator(const path& p,
  directory_options options, error_code& ec) noexcept;
recursive_directory_iterator(const path& p, error_code& ec) noexcept;

Effects:  Constructs a iterator representing the first entry in the directory p resolves to, if any; otherwise, the end iterator. However, if (options & directory_options::skip_permissions_denied) != directory_options::none and construction encounters an error indicating that permission to access  p is denied, constructs the end iterator and does not report an error.

Postcondition: options() == options for the signatures with a directory_options argument, otherwise options() == directory_options::none.

Throws: As specified in Error reporting (7).

[Note: To iterate over the current directory, use recursive_directory_iterator(".") rather than recursive_directory_iterator(""). —end note]

[Note: By default, recursive_directory_iterator does not follow directory symlinks. To follow directory symlinks, specify options as directory_options::follow_directory_symlink —end note]

recursive_directory_iterator(const recursive_directory_iterator& rhs);

Effects: Constructs an object of class recursive_directory_iterator.

Postconditions: this->options() == rhs.options() && this->depth() == rhs.depth()
&& this->recursion_pending() == rhs.recursion_pending()
.

recursive_directory_iterator(recursive_directory_iterator&& rhs) noexcept;

Effects: Constructs an object of class recursive_directory_iterator.

Postconditions: this->options(), this->depth(), and this->recursion_pending() return the values that rhs.options(), rhs.depth(), and rhs.recursion_pending(), respectively, had before the function call.

recursive_directory_iterator& operator=(const recursive_directory_iterator& rhs);

Effects: If *this and rhs are the same object, the member has no effect.

Postconditions: this->options() == rhs.options() && this->depth() == rhs.depth()
&& this->recursion_pending() == rhs.recursion_pending()
.

Returns: *this.

recursive_directory_iterator& operator=(recursive_directory_iterator&& rhs) noexcept;

Effects: If *this and rhs are the same object, the member has no effect.

Postconditions: this->options(), this->depth(), and this->recursion_pending() return the values that rhs.options(), rhs.depth(), and rhs.recursion_pending(), respectively, had before the function call.

Returns: *this.

directory_options options() const;

Requires: *this != recursive_directory_iterator().

Returns: The value of the constructor options argument, if present, otherwise directory_options::none.

Throws: Nothing.

int depth() const;

Requires: *this != recursive_directory_iterator().

Returns: The current depth of the directory tree being traversed. [Note: The initial directory is depth 0, its immediate subdirectories are depth 1, and so forth. —end note]

Throws: Nothing.

bool recursion_pending() const;

Requires: *this != recursive_directory_iterator().

Returns: true if disable_recursion_pending() has not been called subsequent to the prior construction or increment operation, otherwise false.

Throws: Nothing.

recursive_directory_iterator& operator++();
recursive_directory_iterator& increment(error_code& ec) noexcept;

Requires: *this != recursive_directory_iterator().

Effects: As specified by C++14 §24.2.3 Input iterators, except that:

Returns: *this.

Throws: As specified in Error reporting (7).

void pop();

Requires: *this != recursive_directory_iterator().

Effects: If depth() == 0, set *this to recursive_directory_iterator(). Otherwise, cease iteration of the directory currently being iterated over, and continue iteration over the parent directory.

void disable_recursion_pending();

Requires: *this != recursive_directory_iterator().

Postcondition: recursion_pending() == false.

[Note: disable_recursion_pending() is used to prevent unwanted recursion into a directory. —end note]

14.2 recursive_directory_iterator non-member functions [rec.dir.itr.nonmembers]

These functions enable use of recursive_directory_iterator with range-based for statements.

recursive_directory_iterator begin(recursive_directory_iterator iter) noexcept;

Returns: iter.

recursive_directory_iterator end(const recursive_directory_iterator&) noexcept;

Returns: recursive_directory_iterator().

15 Operational functions [fs.op.funcs]

Operational functions query or modify files, including directories, in external storage.

[Note: Because hardware failures, network failures, file system races, and many other kinds of errors occur frequently in file system operations, users should be aware that any filesystem operational function, no matter how apparently innocuous, may encounter an error. See Error reporting (7). —end note]

15.1 Absolute  [fs.op.absolute]

path absolute(const path& p, const path& base=current_path());

Returns: An absolute path composed according to the following table

  p.has_root_directory() !p.has_root_directory()
p.has_root_name() return p return p.root_name()
/ absolute(base).root_directory()
/ absolute(base).relative_path()
/ p.relative_path()
!p.has_root_name() return
absolute(base).root_name()
/ p
return
absolute(base) / p

[Note: For the returned path, rp, rp.is_absolute() is true. —end note]

Throws: If base.is_absolute() is true, throws only if memory allocation fails. As specified in Error reporting (7).

15.2 Canonical  [fs.op.canonical]

path canonical(const path& p, const path& base = current_path());
path canonical(const path& p, error_code& ec);
path canonical(const path& p, const path& base, error_code& ec);

Overview: Converts p, which must exist, to an absolute path that has no symbolic link, ".", or ".." elements.

Returns: A path that refers to the same file system object as absolute(p,base). For the overload without a base argument, base is current_path(). Signatures with argument ec return path() if an error occurs.

Throws:  As specified in Error reporting (7).

Remarks: !exists(p) is an error.

[Note: Canonical pathnames allow security checking of a path (e.g. does this path live in /home/goodguy or /home/badguy?)  —end note]

15.3 Copy  [fs.op.copy]

void copy(const path& from, const path& to);
void copy(const path& from, const path& to, error_code& ec) noexcept;

Effects: copy(from, to, copy_options::none[, ec]).

void copy(const path& from, const path& to, copy_options options);
void copy(const path& from, const path& to, copy_options options,
  error_code& ec) noexcept;

Precondition: At most one constant from each option group (10.2) is present in options.

Effects:

Before the first use of f and t:

Report an error as specified in Error reporting (7) if:

If is_symlink(f), then:

Otherwise if is_regular_file(f), then:

Otherwise if is_directory(f) && ((options & copy_options::recursive)
  != copy_options::none
|| !(options == copy_options::none))
then:

Otherwise no effects.

Throws: As specified in Error reporting (7).

Remarks: For the signature with argument ec, any Filesystem library functions called by the implementation shall have an error_code argument if applicable.

[Example: Given this directory structure:

/dir1
  file1
  file2
  dir2
    file3

Calling copy("/dir1", "/dir3") would result in:

/dir1
  file1
  file2
  dir2
    file3
/dir3
  file1
  file2

Alternatively, calling copy("/dir1", "/dir3", copy_options::recursive) would result in:

/dir1
  file1
  file2
  dir2
    file3  
/dir3
  file1
  file2
  dir2
    file3

—end example]

15.4 Copy file  [fs.op.copy_file]

bool copy_file(const path& from, const path& to);
bool copy_file(const path& from, const path& to, error_code& ec) noexcept;

Returns: copy_file(from, to, copy_options::none[, ec]).

Throws: As specified in Error reporting (7).

bool copy_file(const path& from, const path& to, copy_options options);
bool copy_file(const path& from, const path& to, copy_options options,
               error_code& ec) noexcept;

Precondition: At most one constant from each copy_options option group (10.2) is present in options.

Effects:

If  exists(to) && !(options & (copy_options::skip_existing
 | copy_options::overwrite_existing | copy_options::update_existing))
report a file already exists error as specified in Error reporting (7).

If !exists(to) || (options & copy_options::overwrite_existing)

 || ((options & copy_options::update_existing) && last_write_time(from)
   > last_write_time(to)) || !(options & (copy_options::skip_existing
 | copy_options::overwrite_existing | copy_options::update_existing))
copy the contents and attributes of the file from resolves to the file to resolves to.

Report a file already exists error as specified in Error reporting (7) if:

Otherwise copy the contents and attributes of the file from resolves to to the file to resolves to if:

Otherwise no effects.

Returns: true if the from file was copied, otherwise false. The signature with argument ec return false if an error occurs.

Throws: As specified in Error reporting (7).

Complexity: At most one direct or indirect invocation of status(to).

15.5 Copy symlink  [fs.op.copy_symlink]

void copy_symlink(const path& existing_symlink, const path& new_symlink);
void copy_symlink(const path& existing_symlink, const path& new_symlink,
                  error_code& ec) noexcept;

Effects: function(read_symlink(existing_symlink[, ec]), new_symlink[, ec]), where function is create_symlink or create_directory_symlink, as appropriate.

Throws: As specified in Error reporting (7).

15.6 Create directories  [fs.op.create_directories]

bool create_directories(const path& p);
bool create_directories(const path& p, error_code& ec) noexcept;

Effects: Establishes the postcondition by calling create_directory() for any element of p that does not exist.

Postcondition: is_directory(p)

Returns: true if a new directory was created, otherwise false. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

Complexity: O(n+1) where n is the number of elements of p that do not exist.

15.7 Create directory  [fs.op.create_directory]

bool create_directory(const path& p);
bool create_directory(const path& p, error_code& ec) noexcept;

Effects: Establishes the postcondition by attempting to create the directory p resolves to, as if by POSIX mkdir() with a second argument of S_IRWXU|S_IRWXG|S_IRWXO static_cast<int>(perms::all). Creation failure because p resolves to an existing directory shall not be treated as an error.

Postcondition: is_directory(p)

Returns: true if a new directory was created, otherwise false. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

bool create_directory(const path& p, const path& existing_p);
bool create_directory(const path& p, const path& existing_p, error_code& ec) noexcept;

Effects: Establishes the postcondition by attempting to create the directory p resolves to, with attributes copied from directory existing_p. The set of attributes copied is operating system dependent. Creation failure because p resolves to an existing directory shall not be treated as an error.

[Note: For POSIX based operating systems the attributes are those copied by native API stat(existing_p.c_str(), &attributes_stat) followed by mkdir(p.c_str(), attributes_stat.st_mode).  For Windows based operating systems the attributes are those copied by native API CreateDirectoryExW(existing_p.c_str(), p.c_str(), 0) —end note]

Postcondition: is_directory(p)

Returns: true if a new directory was created, otherwise false. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.8 Create directory symlink  [fs.op.create_dir_symlk]

void create_directory_symlink(const path& to, const path& new_symlink);
void create_directory_symlink(const path& to, const path& new_symlink,
                              error_code& ec) noexcept;

Effects: Establishes the postcondition, as if by POSIX symlink().

Postcondition: new_symlink resolves to a symbolic link file that contains an unspecified representation of to.

Throws: As specified in Error reporting (7).

[Note: Some operating systems require symlink creation to identify that the link is to a directory. Portable code should use create_directory_symlink() to create directory symlinks rather than create_symlink() —end note]

[Note: Some operating systems do not support symbolic links at all or support them only for regular files. Some file systems do not support symbolic links regardless of the operating system - the FAT file system used on memory cards and flash drives, for example. —end note]

15.9 Create hard link  [fs.op.create_hard_lk]

void create_hard_link(const path& to, const path& new_hard_link);
void create_hard_link(const path& to, const path& new_hard_link,
                                      error_code& ec) noexcept;

Effects: Establishes the postcondition, as if by POSIX link().

Postcondition:

Throws: As specified in Error reporting (7).

[Note: Some operating systems do not support hard links at all or support them only for regular files. Some file systems do not support hard links regardless of the operating system - the FAT file system used on memory cards and flash drives, for example. Some file systems limit the number of links per file. —end note]

15.10 Create symlink  [fs.op.create_symlink]

void create_symlink(const path& to, const path& new_symlink);
void create_symlink(const path& to, const path& new_symlink,
                    error_code& ec) noexcept;

Effects: Establishes the postcondition, as if by POSIX symlink().

Postcondition: new_symlink resolves to a symbolic link file that contains an unspecified representation of to.

Throws: As specified in Error reporting (7).

[Note: Some operating systems do not support symbolic links at all or support them only for regular files. Some file systems do not support symbolic links regardless of the operating system - the FAT system used on memory cards and flash drives, for example. —end note]

15.11 Current path  [fs.op.current_path]

path current_path();
path current_path(error_code& ec);

Returns: The absolute path of the current working directory, obtained as if by POSIX getcwd(). The signature with argument ec returns path() if an error occurs.

Throws: As specified in Error reporting (7).

Remarks: The current working directory is the directory, associated with the process, that is used as the starting location in pathname resolution for relative paths.

[Note: The current_path() name was chosen to emphasize that the return is a path, not just a single directory name.

The current path as returned by many operating systems is a dangerous global variable. It may be changed unexpectedly by a third-party or system library functions, or by another thread.  —end note]

void current_path(const path& p);
void current_path(const path& p, error_code& ec) noexcept;

Effects: Establishes the postcondition, as if by POSIX chdir().

Postcondition: equivalent(p, current_path()).

Throws: As specified in Error reporting (7).

[Note: The current path for many operating systems is a dangerous global state. It may be changed unexpectedly by a third-party or system library functions, or by another thread.  —end note]

15.12 Exists  [fs.op.exists]

bool exists(file_status s) noexcept;

Returns: status_known(s) && s.type() != file_type::not_found

bool exists(const path& p);
bool exists(const path& p, error_code& ec) noexcept;

Returns: exists(status(p)) or exists(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.13 Equivalent  [fs.op.equivalent]

bool equivalent(const path& p1, const path& p2);
bool equivalent(const path& p1, const path& p2, error_code& ec) noexcept;

Effects: Determines file_status s1 and s2, as if by status(p1) and  status(p2), respectively.

Returns: true, if sf1 s1 == sf2 s2 and p1 and p2 resolve to the same file system entity, else false. The signature with argument ec returns false if an error occurs.

Two paths are considered to resolve to the same file system entity if two candidate entities reside on the same device at the same location. This is determined as if by the values of the POSIX stat structure, obtained as if by stat() for the two paths, having equal st_dev values and equal st_ino values.

Throws: filesystem_error if (!exists(s1) && !exists(s2)) || (is_other(s1) && is_other(s2)), otherwise as specified in Error reporting (7).

15.14 File size  [fs.op.file_size]

uintmax_t file_size(const path& p);
uintmax_t file_size(const path& p, error_code& ec) noexcept;

Returns: If !exists(p) && || !is_regular_file(p) an error is reported (7). Otherwise, the size in bytes of the file p resolves to, determined as if by the value of the POSIX stat structure member st_size obtained as if by POSIX stat(). Otherwise, static_cast<uintmax_t>(-1). The signature with argument ec returns static_cast<uintmax_t>(-1) if an error occurs.

Throws: As specified in Error reporting (7).

15.15 Hard link count  [fs.op.hard_lk_ct]

uintmax_t hard_link_count(const path& p);
uintmax_t hard_link_count(const path& p, error_code& ec) noexcept;

Returns: The number of hard links for p. The signature with argument ec returns static_cast<uintmax_t>(-1) if an error occurs.

Throws: As specified in Error reporting (7).

15.16 Is block file  [fs.op.is_block_file]

bool is_block_file(file_status s) noexcept;

Returns: s.type() == file_type::block

bool is_block_file(const path& p);
bool is_block_file(const path& p, error_code& ec) noexcept;

Returns: is_block_file(status(p)) or is_block_file(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.17 Is character file  [fs.op.is_char_file]

bool is_character_file(file_status s) noexcept;

Returns: s.type() == file_type::character

bool is_character_file(const path& p);
bool is_character_file(const path& p, error_code& ec) noexcept;

Returns: is_character_file(status(p)) or is_character_file(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.18 Is directory  [fs.op.is_directory]

bool is_directory(file_status s) noexcept;

Returns: s.type() == file_type::directory

bool is_directory(const path& p);
bool is_directory(const path& p, error_code& ec) noexcept;

Returns: is_directory(status(p)) or is_directory(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.19 Is empty  [fs.op.is_empty]

bool is_empty(const path& p);
bool is_empty(const path& p, error_code& ec) noexcept;

Effects: Determines file_status s, as if by status(p, ec).

Returns: is_directory(s)
         ? directory_iterator(p) == directory_iterator()
         : file_size(p) == 0;

The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.20 Is fifo  [fs.op.is_fifo]

bool is_fifo(file_status s) noexcept;

Returns: s.type() == file_type::fifo

bool is_fifo(const path& p);
bool is_fifo(const path& p, error_code& ec) noexcept;

Returns: is_fifo(status(p)) or is_fifo(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.21 Is other  [fs.op.is_other]

bool is_other(file_status s) noexcept;

Returns: return exists(s) && !is_regular_file(s) && !is_directory(s) && !is_symlink(s)

bool is_other(const path& p);
bool is_other(const path& p, error_code& ec) noexcept;

Returns: is_other(status(p)) or is_other(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.22 Is regular file  [fs.op.is_regular_file]

bool is_regular_file(file_status s) noexcept;

Returns: s.type() == file_type::regular.

bool is_regular_file(const path& p);

Returns: is_regular_file(status(p)).

Throws: filesystem_error if status(p) would throw filesystem_error.

bool is_regular_file(const path& p, error_code& ec) noexcept;

Effects: Sets ec as if by status(p, ec). [Note: file_type::none, file_type::not_found and file_type::unknown cases set ec to error values. To distinguish between cases, call the status function directly. —end note]

Returns: is_regular_file(status(p, ec)). Returns false if an error occurs.

15.23 Is socket  [fs.op.is_socket]

bool is_socket(file_status s) noexcept;

Returns: s.type() == file_type::socket

bool is_socket(const path& p);
bool is_socket(const path& p, error_code& ec) noexcept;

Returns: is_socket(status(p)) or is_socket(status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.24 Is symlink  [fs.op.is_symlink]

bool is_symlink(file_status s) noexcept;

Returns: s.type() == file_type::symlink

bool is_symlink(const path& p);
bool is_symlink(const path& p, error_code& ec) noexcept;

Returns: is_symlink(symlink_status(p)) or is_symlink(symlink_status(p, ec)), respectively. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.25 Last write time  [fs.op.last_write_time]

file_time_type last_write_time(const path& p);
file_time_type last_write_time(const path& p, error_code& ec) noexcept;

Returns: The time of last data modification of p, determined as if by the value of the POSIX stat structure member st_mtime  obtained as if by POSIX stat(). The signature with argument ec returns file_time_type::min() if an error occurs.

Throws: As specified in Error reporting (7).

void last_write_time(const path& p, file_time_type new_time);
void last_write_time(const path& p, file_time_type new_time,
                     error_code& ec) noexcept;

Effects: Sets the time of last data modification of the file resolved to by p to new_time, as if by POSIX stat() followed by POSIX utime() futimens() .

Throws: As specified in Error reporting (7).

[Note: A postcondition of last_write_time(p) == new_time is not specified since it might not hold for file systems with coarse time granularity. —end note]

15.26 Permissions  [fs.op.permissions]

void permissions(const path& p, perms prms);
void permissions(const path& p, perms prms, error_code& ec) noexcept;

Requires: !((prms & perms::add_perms) != perms::none
 && (prms & perms::remove_perms) != perms::none)
.

Effects: Applies the effective permissions bits from prms to the file p resolves to, as if by POSIX fchmodat(). The effective permission bits are determined as specified by the following table.

bits present in prms Effective bits applied
Neither add_perms nor remove_perms prms & perms::mask
add_perms

status(p).permissions() | (prms & perms::mask)

remove_perms status(p).permissions() & ~(prms & perms::mask)

[Note: Conceptually permissions are viewed as bits, but the actual implementation may use some other mechanism. —end note]

Throws: As specified in Error reporting (7).

15.27 Read symlink  [fs.op.read_symlink]

path read_symlink(const path& p);
path read_symlink(const path& p, error_code& ec);

Returns:  If p resolves to a symbolic link, a path object containing the contents of that symbolic link. The signature with argument ec returns path() if an error occurs.

Throws: As specified in Error reporting (7). [Note: It is an error if p does not resolve to a symbolic link. —end note]

15.28 Remove  [fs.op.remove]

bool remove(const path& p);
bool remove(const path& p, error_code& ec) noexcept;

Effects:  If exists(symlink_status(p,ec)), it is removed as if by POSIX remove().

[Note: A symbolic link is itself removed, rather than the file it resolves to being removed. —end note]

Postcondition: !exists(symlink_status(p)).

Returns:  false if p did not exist in the first place, otherwise true. The signature with argument ec returns false if an error occurs.

Throws: As specified in Error reporting (7).

15.29 Remove all  [fs.op.remove_all]

uintmax_t remove_all(const path& p);
uintmax_t remove_all(const path& p, error_code& ec) noexcept;

Effects:  Recursively deletes the contents of p if it exists, then deletes file p itself, as if by POSIX remove().

[Note: A symbolic link is itself removed, rather than the file it resolves to being removed. —end note]

Postcondition: !exists(p)

Returns: The number of files removed. The signature with argument ec returns static_cast<uintmax_t>(-1) if an error occurs.

Throws: As specified in Error reporting (7).

15.30 Rename  [fs.op.rename]

void rename(const path& old_p, const path& new_p);
void rename(const path& old_p, const path& new_p, error_code& ec) noexcept;

Effects: Renames old_p to new_p, as if by POSIX rename().

[Note: If old_p and new_p resolve to the same existing file, no action is taken. Otherwise, if new_p resolves to an existing non-directory file, it is removed, while if new_p resolves to an existing directory, it is removed if empty on POSIX compliant operating systems but is an error on some other operating systems. A symbolic link is itself renamed, rather than the file it resolves to being renamed. —end note]

Throws: As specified in Error reporting (7).

15.31 Resize file  [fs.op.resize_file]

void resize_file(const path& p, uintmax_t new_size);
void resize_file(const path& p, uintmax_t new_size, error_code& ec) noexcept;

Postcondition: file_size() == new_size.

Throws: As specified in Error reporting (7).

Remarks: Achieves its postconditions as if by POSIX truncate().

15.32 Space  [fs.op.space]

space_info space(const path& p);
space_info space(const path& p, error_code& ec) noexcept;

Returns: An object of type space_info. The value of the space_info object is determined as if by using POSIX statvfs() to obtain a POSIX struct statvfs, and then multiplying its f_blocks, f_bfree, and f_bavail members by its f_frsize member, and assigning the results to the capacity, free, and available members respectively. Any members for which the value cannot be determined shall be set to static_cast<uintmax_t>(-1). For the signature with argument ec, all members are set to static_cast<uintmax_t>(-1) if an error occurs.

Throws: As specified in Error reporting (7).

Remarks: The value of member space_info::available is operating system dependent. [Note: available may be less than free. — end note]

15.33 Status  [fs.op.status]

file_status status(const path& p);

Effects: As if:

error_code ec;
file_status result = status(p, ec);
if (result == file_type::none)
  throw filesystem_error(implementation-supplied-message, p, ec);
return result;

Returns: See above.

Throws: filesystem_error. [Note: result values of file_status(file_type::not_found) and file_status(file_type::unknown) are not considered failures and do not cause an exception to be thrown. —end note]

file_status status(const path& p, error_code& ec) noexcept;

Effects:

If possible, determines the attributes of the file p resolves to, as if by POSIX stat().

If, during attribute determination, the underlying file system API reports an error, sets ec to indicate the specific error reported. Otherwise, ec.clear().

[Note: This allows users to inspect the specifics of underlying API errors even when the value returned by status() is not file_status(file_type::none)—end note]

Returns:

If ec != error_code():

[Note: These semantics distinguish between p being known not to exist, p existing but not being able to determine its attributes, and there being an error that prevents even knowing if p exists. These distinctions are important to some use cases. —end note]

Otherwise,

Remarks: If a symbolic link is encountered during pathname resolution, pathname resolution continues using the contents of the symbolic link.

15.34 Status known  [fs.op.status_known]

bool status_known(file_status s) noexcept;

Returns: s.type() != file_type::none

15.35 Symlink status  [fs.op.symlink_status]

file_status symlink_status(const path& p);
file_status symlink_status(const path& p, error_code& ec) noexcept;

Effects:  Same as status(), above, except that the attributes of p are determined as if by POSIX lstat().

Returns: Same as status(), above, except that if the attributes indicate a symbolic link, as if by POSIX S_ISLNK(), return file_status(file_type::symlink). The signature with argument ec returns file_status(file_type::none) if an error occurs.

Remarks: Pathname resolution terminates if p names a symbolic link.

Throws: As specified in Error reporting (7).

15.36 System complete  [fs.op.system_complete]

path system_complete(const path& p);
path system_complete(const path& p, error_code& ec);

Effects: Composes an absolute path from p, using the same rules used by the operating system to resolve a path passed as the filename argument to standard library open functions.

Returns: The composed path. The signature with argument ec returns path() if an error occurs.

Postcondition: For the returned path, rp, rp.is_absolute() is true.

Throws: As specified in Error reporting (7).

[Example: For POSIX based operating systems, system_complete(p) has the same semantics as absolute(p, current_path()).

For Windows based operating systems, system_complete(p) has the same semantics as absolute(p, current_path()) if p.is_absolute() || !p.has_root_name() or p and base have the same root_name(). Otherwise it acts like absolute(p, kinkycwd), where kinkycwd is the current directory for the p.root_name() drive. This will be the current directory for that drive the last time it was set, and thus may be residue left over from a prior program run by the command processor!. Although these semantics are useful, they are very error-prone may be surprising. —end example]

15.37 Temporary directory path  [fs.op.temp_dir_path]

path temp_directory_path();
path temp_directory_path(error_code& ec);

Returns: An unspecifed directory path suitable for temporary files. An error shall be reported if !exists(p) || !is_directory(p), where p is the path to be returned. The signature with argument ec returns path() if an error occurs.

Throws: As specified in Error reporting (7).

[Example: For POSIX based operating systems, an implementation might return the path supplied by the first environment variable found in the list TMPDIR, TMP, TEMP, TEMPDIR, or if none of these are found, "/tmp".

For Windows based operating systems, an implementation might return the path reported by the Windows GetTempPath API function. —end example]