Committee: ISO/IEC JTC1 SC22 WG21 SG1 Concurrency
Document Number: P0260R1
Date: 2017-02-05
Authors: Lawrence Crowl, Chris Mysen
Reply To: Lawrence Crowl, Lawrence@Crowl.org
Introduction
Conceptual Interface
Basic Operations
Non-Waiting Operations
Non-Blocking Operations
Push Front Operations
Closed Queues
Empty and Full Queues
Queue Names
Element Type Requirements
Exception Handling
Queue Ordering
Lock-Free Implementations
Concrete Queues
Locking Buffer Queue
Lock-Free Buffer Queue
Additional Conceptual Tools
Fronts and Backs
Streaming Iterators
Storage Iterators
Binary Interfaces
Managed Indirection
Implementation
Proposed Wording
?.? Concurrent queues [conqueues]
?.?.1 General [conqueues.general]
?.?.2 Header <conqueue> synopsis [conqueues.syn]
?.?.3 Operation status [conqueues.status]
?.?.4 Concepts [conqueues.concepts]
?.?.4.1 Element requirements [conqueues.concept.elemreq]
?.?.4.2 Element type naming [conqueues.concept.elemtype]
?.?.4.3 Lock-free attribute operations [conqueues.concept.lockfree]
?.?.4.4 State operations [conqueues.concept.state]
?.?.4.5 Waiting operations [conqueues.concept.wait]
?.?.4.6 Non-waiting operations [conqueues.concept.nonwait]
?.?.4.7 Type concepts [conqueues.concept.type]
?.?.5 Concrete queues [conqueues.concrete]
?.?.5.1 Class template buffer_queue
[conqueues.concrete.buffer]
?.?.6 Tools [conqueues.tools]
?.?.6.1 Ends and Iterators [conqueues.tools.ends]
?.?.6.1.1 Class template generic_queue_back
[conqueues.tools.back]
?.?.6.1.2 Class template generic_queue_front
[conqueues.tools.front]
?.?.6.2 Binary interfaces [conqueues.tools.binary]
?.?.6.2.1 Class template queue_base
[conqueues.tools.base]
?.?.6.2.2 Class template queue_wrapper [conqueues.tools.wrap]
?.?.6.2.3 Binary ends [conqueues.tools.binends]
?.?.6.3 Managed Ends [conqueues.tools.managed]
?.?.6.3.1 Class template shared_queue_back
[conqueues.tools.sharedback]
?.?.6.3.2 Class template shared_queue_front
[conqueues.tools.front]
?.?.6.3.3 Function template share_queue_ends
[conqueues.tools.shareendsfront]
Revision History
Queues provide a mechanism for communicating data between components of a system.
The existing deque
in the standard library
is an inherently sequential data structure.
Its reference-returning element access operations
cannot synchronize access to those elements
with other queue operations.
So, concurrent pushes and pops on queues
require a different interface to the queue structure.
Moreover, concurrency adds a new dimension for performance and semantics. Different queue implementation must trade off uncontended operation cost, contended operation cost, and element order guarantees. Some of these trade-offs will necessarily result in semantics weaker than a serial queue.
We provide basic queue operations, and then extend those operations to cover other important issues.
The essential solution to the problem of concurrent queuing is to shift to value-based operations, rather than reference-based operations.
The basic operations are:
void
queue::push(const Element&);
void
queue::push(Element&&);
Push the Element
onto the queue.
Element queue::value_pop();
Pop an Element
from the queue.
The element will be moved out of the queue in preference to being copied.
These operations will wait when the queue is full or empty. (Not all queue implementations can actually be full.) These operations may block for mutual exclusion as well.
Waiting on a full or empty queue can take a while, which has an opportunity cost. Avoiding that wait enables algorithms to avoid queuing speculative work when a queue is full, to do other work rather than wait for a push on a full queue, and to do other work rather than wait for a pop on an empty queue.
queue_op_status
queue::try_push(const Element&);
queue_op_status
queue::try_push(Element&&);
If the queue is full, return queue_op_status::full
.
Otherwise, push the Element
onto the queue.
Return queue_op_status::success
.
queue_op_status
queue::try_pop(Element&);
If the queue is empty, return queue_op_status::empty
.
Otherwise, pop the Element
from the queue.
The element will be moved out of the queue in preference to being copied.
Return queue_op_status::success
.
These operations will not wait when the queue is full or empty. They may block for mutual exclusion.
For cases when blocking for mutual exclusion is undesirable,
one can consider non-blocking operations.
The interface is the same as the try operations
but is allowed to also return queue_op_status::busy
in case the operation is unable to complete without blocking.
queue_op_status
queue::nonblocking_push(const Element&);
queue_op_status
queue::nonblocking_push(Element&&);
If the operation would block, return queue_op_status::busy
.
Otherwise, if the queue is full, return queue_op_status::full
.
Otherwise, push the Element
onto the queue.
Return queue_op_status::success
.
queue_op_status
queue::nonblocking_pop(Element&);
If the operation would block, return queue_op_status::busy
.
Otherwise, if the queue is empty, return queue_op_status::empty
.
Otherwise, pop the Element
from the queue.
The element will be moved out of the queue in preference to being copied.
Return queue_op_status::success
.
These operations will neither wait nor block. However, they may do nothing.
The non-blocking operations highlight a terminology problem.
In terms of synchronization effects,
nonwaiting_push
on queues
is equivalent to try_lock
on mutexes.
And so one could conclude that
the existing try_push
should be renamed nonwaiting_push
and nonblocking_push
should be renamed try_push
.
However, at least Thread Building Blocks uses the existing terminology.
Perhaps better is to not use try_push
and instead use nonwaiting_push
and nonblocking_push
.
In November 2016,
the Concurrency Study Group chose to defer non-blocking operations.
Hence, the proposed wording does not include these functions.
In addition,
as these functions were the only ones that returned busy
,
that enumeration is also not included.
Occasionally, one may wish to return a popped item to the queue.
We can provide for this with push_front
operations.
void
queue::push_front(const Element&);
void
queue::push_front(Element&&);
Push the Element
onto the back of the queue,
i.e. in at the end of the queue that is normally popped.
Return queue_op_status::success
.
queue_op_status
queue::try_push_front(const Element&);
queue_op_status
queue::try_push_front(Element&&);
If the queue was full, return queue_op_status::full
.
Otherwise, push the Element
onto the front of the queue,
i.e. in at the end of the queue that is normally popped.
Return queue_op_status::success
.
queue_op_status
queue::nonblocking_push_front(const Element&);
queue_op_status
queue::nonblocking_push_front(Element&&);
If the operation would block, return queue_op_status::busy
.
Otherwise, if the queue is full, return queue_op_status::full
.
Otherwise, push the Element
onto the front queue.
i.e. in at the end of the queue that is normally popped.
Return queue_op_status::success
.
This feature was requested at the Spring 2012 meeting. However, we do not think the feature works.
The name push_front
is inconsistent
with existing "push back" nomenclature.
The effects of push_front
are only distinguishable from a regular push
when there is a strong ordering of elements.
Highly concurrent queues will likely have no strong ordering.
The push_front
call may fail
due to full queues, closed queues, etc.
In which case the operation will suffer contention,
and may succeed only after interposing push and pop operations.
The consequence is that
the original push order is not preserved in the final pop order.
So, push_front
cannot be directly used as an 'undo'.
The operation implies an ability to reverse internal changes at the front of the queue. This ability implies a loss efficiency in some implementations.
In short, we do not think that in a concurrent environment
push_front
provides sufficient semantic value
to justify its cost.
Consequently, the proposed wording does not provide this feature.
Threads using a queue for communication need some mechanism to signal when the queue is no longer needed. The usual approach is add an additional out-of-band signal. However, this approach suffers from the flaw that threads waiting on either full or empty queues need to be woken up when the queue is no longer needed. To do that, you need access to the condition variables used for full/empty blocking, which considerably increases the complexity and fragility of the interface. It also leads to performance implications with additional mutexes or atomics. Rather than require an out-of-band signal, we chose to directly support such a signal in the queue itself, which considerably simplifies coding.
To achieve this signal, a thread may close a queue.
Once closed, no new elements may be pushed onto the queue.
Push operations on a closed queue
will either return queue_op_status::closed
(when they have a status return)
or throw queue_op_status::closed
(when they do not).
Elements already on the queue may be popped off.
When a queue is empty and closed,
pop operations will either
return queue_op_status::closed
(when they have a status return)
or throw queue_op_status::closed
(when they do not).
The additional operations are as follows. They are essentially equivalent to the basic operations except that they return a status, avoiding an exception when queues are closed.
void queue::close() noexcept;
Close the queue.
bool queue::is_closed() const;
Return true iff the queue is closed.
queue_op_status
queue::wait_push(const Element&);
queue_op_status
queue::wait_push(Element&&);
If the queue was closed, return queue_op_status::closed
.
Otherwise, push the Element
onto the queue.
Return queue_op_status::success
.
queue_op_status
queue::wait_pop(Element&);
If the queue is empty and closed, return queue_op_status::closed
.
Otherwise, if the queue is empty, return queue_op_status::empty
.
Otherwise, pop the Element
from the queue.
The element will be moved out of the queue in preference to being copied.
Return queue_op_status::success
.
The push and pop operations will wait when the queue is full or empty. All these operations may block for mutual exclusion as well.
There are use cases for opening a queue that is closed. While we are not aware of an implementation in which the ability to reopen a queue would be a hardship, we also imagine that such an implementation could exist. Open should generally only be called if the queue is closed and empty, providing a clean synchronization point, though it is possible to call open on a non-empty queue. An open operation following a close operation is guaranteed to be visible after the close operation and the queue is guaranteed to be open upon completion of the open call. (But of course, another close call could occur immediately thereafter.)
void queue::open();
Open the queue.
Note that when is_closed()
returns false,
there is no assurance that
any subsequent operation finds the queue closed
because some other thread may close it concurrently.
If an open operation is not available, there is an assurance that once closed, a queue stays closed. So, unless the programmer takes care to ensure that all other threads will not close the queue, only a return value of true has any meaning.
Given these concerns with reopening queues, we do not propose wording to reopen a queue.
It is sometimes desirable to know if a queue is empty.
bool queue::is_empty() const;
Return true iff the queue is empty.
This operation is useful only during intervals when the queue is known to not be subject to pushes and pops from other threads. Its primary use case is assertions on the state of the queue at the end if its lifetime, or when the system is in quiescent state (where there no outstanding pushes).
We can imagine occasional use for knowing when a queue is full, for instance in system performance polling. The motivation is significantly weaker though.
bool queue::is_full() const;
Return true iff the queue is full.
Not all queues will have a full state, and these would always return false.
It is sometimes desirable for queues to be able to identify themselves. This feature is particularly helpful for run-time diagnotics, particularly when 'ends' become dynamically passed around between threads. See Managed Indirection below.
const char* queue::name();
Return the name string provided as a parameter to queue construction.
There is some debate on this facility, but we see no way to effectively replicate the facility. However, in recognition of that debate, the wording below does not provide the name facility.
The above operations require element types with a default constructor, copy/move constructors, copy/move assignment operators, and destructor. These operations may be trivial. The default constructor and destructor shall not throw. The copy/move constructors and copy/move assignment operators may throw, but must must leave the objects in a valid state for subsequent operations.
Concurrent queues cannot completely hide the effect of exceptions, in part because changes cannot be transparently undone when other threads are observing the queue.
Queues may rethrow exceptions from storage allocation, mutexes, or condition variables.
If the element type operations required do not throw exceptions, then only the exceptions above are rethrown.
When an element copy/move may throw, some queue operations have additional behavior.
Construction shall rethrow, destroying any elements allocated.
A push operation shall rethrow and the state of the queue is unaffected.
A pop operation shall rethrow and the element is popped from the queue. The value popped is effectively lost. (Doing otherwise would likely clog the queue with a bad element.)
The conceptual queue interface makes minimal guarantees.
The queue is not empty if there is an element that has been pushed but not popped.
A push operation synchronizes with the pop operation that obtains that element.
A close operation synchronizes with an operation that observes that the queue is closed.
There is a sequentially consistent order of operations.
In particular, the conceptual interface does not guarantee that the sequentially consistent order of element pushes matches the sequentially consistent order of pops. Concrete queues could specify more specific ordering guarantees.
Lock-free queues will have some trouble
waiting for the queue to be non-empty or non-full.
Therefore, we propose two closely-related concepts.
A full concurrent queue concept as described above,
and a non-waiting concurrent queue concept
that has all the operations except
push
,
wait_push
,
value_pop
and wait_pop
.
That is, it has only non-waiting operations
(presumably emulated with busy wait)
and non-blocking operations,
but no waiting operations.
We propose naming these WaitingConcurrentQueue
and NonWaitingConcurrentQueue
,
respectively.
Note: Adopting this conceptual split requires splitting some of the facilities defined later.
It may be helpful to know if a concurrent queue has a lock free implementation.
static bool queue::is_lock_free() const;
Return true iff the has a lock-free implementation of the non-waiting operations.
In addition to the concept, the standard needs at least one concrete queue. We describe two concrete queues.
We provide a concrete concurrent queue
in the form of a fixed-size buffer_queue
.
It meets the WaitingConcurrentQueue
concept.
It provides for construction of an empty queue,
and construction of a queue from a pair of iterators.
Constructors take a parameter
specifying the maximum number of elements in the buffer.
Constructors may also take a parameter
specifying the name of the queue.
If the name is not present, it defaults to the empty string.
The buffer_queue
deletes the default constructor, the copy constructor,
and the copy assignment operator.
We feel that their benefit might not justify their potential confusion.
We provide a concrete concurrent queue
in the form of a fixed-size lock_free_buffer_queue
.
It meets the NonWaitingConcurrentQueue
concept.
The queue is still under development,
so details may change.
In November 2016, the Concurrency Study Group chose to defer lock-free queues. Hence, the proposed wording does not include a concrete lock-free queue.
There are a number of tools that support use of the conceptual interface. These tools are not part of the queue interface, but provide restricted views or adapters on top of the queue useful in implementing concurrent algorithms.
Restricting an interface to one side of a queue
is a valuable code structuring tool.
This restriction is accomplished with
the classes generic_queue_front
and generic_queue_back
parameterized on the concrete queue implementation.
These act as pointers
with access to only the front or the back of a queue.
The front of the queue is where elements are popped.
The back of the queue is where elements are pushed.
void send( int number, generic_queue_back<buffer_queue<int>> arv );
These fronts and backs
are also able to provide begin
and end
operations
that unambiguously stream data into or out of a queue.
In order to enable the use of existing algorithms streaming through concurrent queues, they need to support iterators. Output iterators will push to a queue and input iterators will pop from a queue. Stronger forms of iterators are in general not possible with concurrent queues.
Iterators implicitly require waiting for the advance,
so iterators are only supportable
with the WaitingConcurrentQueue
concept.
void iterate(
generic_queue_back<buffer_queue<int>>::iterator bitr,
generic_queue_back<buffer_queue<int>>::iterator bend,
generic_queue_front<buffer_queue<int>>::iterator fitr,
generic_queue_front<buffer_queue<int>>::iterator fend,
int (*compute)( int ) )
{
while ( fitr != fend && bitr != bend )
*bitr++ = compute(*fitr++);
}
Note that contrary to existing iterator algorithms, we check both iterators for reaching their end, as either may be closed at any time.
Note that with suitable renaming, the existing standard front insert and back insert iterators could work as is. However, there is nothing like a pop iterator adapter.
In addition to iterators that stream data into and out of a queue, we could provide an iterator over the storage contents of a queue. Such and iterator, even when implementable, would mostly likely be valid only when the queue is otherwise quiecent. We believe such an iterator would be most useful for debugging, which may well require knowledge of the concrete class. Therefore, we do not propose wording for this feature.
The standard library is template based,
but it is often desirable to have a binary interface
that shields client from the concrete implementations.
For example, std::function
is a binary interface
to callable object (of a given signature).
We achieve this capability in queues with type erasure.
We provide a queue_base
class template
parameterized by the value type.
Its operations are virtual.
This class provides the essential independence
from the queue representation.
We also provide queue_front
and queue_back
class templates parameterized by the value types.
These are essentially
generic_queue_front<queue_base<Value>>
and
generic_queue_front<queue_base<Value>>
,
respectively.
To obtain a pointer to queue_base
from an non-virtual concurrent queue,
construct an instance the queue_wrapper
class template,
which is parameterized on the queue
and derived from queue_base
.
Upcasting a pointer to the queue_wrapper
instance
to a queue_base
instance
thus erases the concrete queue type.
extern void seq_fill( int count, queue_back<int> b );
buffer_queue<int> body( 10 /*elements*/, /*named*/ "body" );
queue_wrapper<buffer_queue<int>> wrap( body );
seq_fill( 10, wrap.back() );
Long running servers may have the need to reconfigure the relationship between queues and threads. The ability to pass 'ends' of queues between threads with automatic memory management eases programming.
To this end, we provide
shared_queue_front
and
shared_queue_back
template classes.
These act as reference-counted versions
of the queue_front
and
queue_back
template classes.
These shared versions
act on a queue_counted
class template,
which is a counted version of queue_base
.
The concrete counted queues are
the queue_owner
class template,
which takes ownership of a raw pointer to a queue,
and the queue_object
class template,
which constructs and instance of the implementation queue within itself.
Both class templates are derived from queue_counted
.
queue_owner<buffer_queue<int>> own( new buffer_queue<int>(10, "own") ); seq_fill( 10, own.back() );
queue_object<buffer_queue<int>> obj( 10, "own" ); seq_fill( 10, obj.back() );
The share_queue_ends(Args ... args)
template function
will provide a pair of
shared_queue_front
and shared_queue_back
to a dynamically allocated queue_object
instance
containing an instance of the specified implementation queue.
When the last of these fronts and backs are deleted,
the queue itself will be deleted.
Also, when the last of the fronts or the last of the backs is deleted,
the queue will be closed.
auto x = share_queue_ends<buffer_queue<int>>( 10, "shared" );
shared_queue_front<int> f(x.first);
shared_queue_back<int> b(x.second);
f.push(3);
assert(3 == b.value_pop());
A free, open-source implementation of these interfaces
is avaliable at the Google Concurrency Library project
at
https://github.com/alasdairmackintosh/google-concurrency-library.
The concrete buffer_queue
is in
..../blob/master/include/buffer_queue.h.
The concrete lock_free_buffer_queue
is in
..../blob/master/include/lock_free_buffer_queue.h.
The corresponding implementation of the conceptual tools is in
..../blob/master/include/queue_base.h.
The concurrent queue container definition is as follows. The section, paragraph, and table references are based on those of N4567 Working Draft, Standard for Programming Language C++, Richard Smith, November 2015.
Add a new section.
Add a new section.
This section provides mechanisms for concurrent access to a queue. These mechanisms ease the production of race-free programs (1.10 [intro.multithread]).
To Be Determined.
Add a new section.
Many concurrent queue operations return a status in the form of the following enumeration.
enum class queue_op_status
- Enumerators:
success = 0, empty, full, closed
Add a new section.
This section provides the conceptual operations for concurrent queues of type
queue
ofElement
types.
Add a new section:
The types of the elements of a concurrent queue must provide a default constructor, either or both of a copy constructor or a move constructor, either or both of a copy assignment operator or a move assignment operator, and a destructor.
The default constructor and destructor shall not throw. Any copy/more constructor or copy/move assignment operator that throws shall leave the objects in a valid state for subsequent operations.
None of the above constructors, assignments or destructor may call any operation on a concurrent queue for which their objects may become a member. [Note: Queues may hold an internal lock while performing the above operations, and if they were to call a queue operation, deadlock would result. —end note]
Add a new section:
The queue class shall provide a typedef to its element value type.
typedef implementation-defined value_type;
Add a new section:
A queue type provides lock-free operations (1.10 [intro.multithread], or it does not.
static bool queue::is_lock_free();
- Returns:
If the non-waiting operations of the queue type are lock-free,
true
. Otherwise,false
.- Remark:
The function returns the same result for all instances of the type.
Add a new section:
For synchronization purposes, and unless otherwise stated, all queue operations appear to operate on a single memory location, all non-const queue operations appear to be sequentially consistent atomic read-modify-write operations, and all const queue operations appear to be atomic loads from this location. [Note: In particular, all queue operations appear to execute in a single global order, that is part of the total order S (29.3 [atomics.order]) of sequentially consistent operations. Each non-const queue operation A strongly happens before every operation on the same queue that follows A in S. Whether or not the queue preserves a FIFO order is a property of the concrete class. —end note]
static bool queue::is_lock_free();
- Returns:
If the non-waiting operations of the queue type are lock-free,
true
. Otherwise,false
.- Remark:
The function returns the same result for all instances of the type.
Add a new section:
Upon construction, every queue shall be in an open state. It may move to a closed state, but shall not move back to an open state.
void queue::close() noexcept;
- Effects:
Closes the queue. No pushes subsequent to the close shall succeed.
bool queue::is_closed() const noexcept;
- Returns:
true
if the queue is closed, otherwise,false
bool queue::is_empty() const noexcept;
- Returns:
true
if every element pushed has also been popped. Otherwise,false
- Notes:
This operation is typically useful only when threads are known to be in a state where they will not push.
bool queue::is_full() const noexcept;
- Returns:
true
if a push operation would fail due to unavailable space. Otherwise,false
- Notes:
This operation is typically useful only when threads are known to be in a state where they will not pop.
Add a new section:
void queue::push(const Element&);
void queue::push(Element&&);
- Effects:
If the queue is closed, throws an exception. Otherwise, if space is available on the queue, copies or moves the
element
onto the queue and returns. Otherwise, waits until space is available or the queue is closed.- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the queue is unaffected and the push shall rethrow the exception. If the operation cannot otherwise complete because the queue is closed, throws
queue_op_status::closed
.
Element queue::value_pop();
- Effects:
If an element is available on the queue, moves the element from the queue to the result and returns. Otherwise, if the queue is closed, throws an exception. Otherwise, waits until an element is available or the queue is closed.
- Returns:
The element moved from the queue.
- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the element is popped and the pop shall rethrow the exception. If the operation cannot otherwise complete because the queue is closed, throws
queue_op_status::closed
.
queue_op_status queue::wait_push(const Element&);
queue_op_status queue::wait_push(Element&&);
- Effects:
If the queue is closed, returns. Otherwise, if space is available on the queue, copies or moves the
element
onto the queue and returns. Otherwise, waits until space is available or the queue is closed.- Returns:
If the queue was closed,
queue_op_status::closed
. Otherwise, the push was successful,queue_op_status::success
.- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the queue is unaffected and the push shall rethrow the exception.
queue_op_status queue::wait_pop(Element&);
- Effects:
If an element is available on the queue, moves the element from the queue to the parameter and returns. Otherwise, if the queue is closed, returns. Otherwise, waits until an element is available or the queue is closed.
- Returns:
If the queue was closed,
queue_op_status::closed
. Otherwise, the pop was successful,queue_op_status::success
.- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the element is popped and the pop shall rethrow the exception.
Add a new section:
queue_op_status queue::try_push(const Element&);
queue_op_status queue::try_push(Element&&);
- Effects:
If the queue is closed, returns. Otherwise, if space is available on the queue, copies or moves the
element
onto the queue and returns. Otherwise, returns.- Returns:
If the queue was closed,
queue_op_status::closed
. Otherwise, if the push was successful,queue_op_status::success
. Otherwise, space was unavailable,queue_op_status::full
.- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the queue is unaffected and the push shall rethrow the exception.
queue_op_status queue::try_pop(Element&);
- Effects:
If an element is available on the queue, moves the element from the queue to the parameter and returns. Otherwise, returns.
- Returns:
If the pop was successful,
queue_op_status::success
. Otherwise, if the queue is closed,queue_op_status::closed
. Otherwise, no element was available,queue_op_status::empty
.- Throws:
Any exception from operations on storage allocation, mutexes, or condition variables. If an element copy/move operation throws, the state of the element is popped and the pop shall rethrow the exception.
Add a new section:
The
WaitingConcurrentQueue
concept provides all of the operations specified above.The
NonWaitingConcurrentQueue
concept provides all of the operations specified above, except the waiting operations ([conqueues.concept.wait]). ANonWaitingConcurrentQueue
is lock-free (1.10 [intro.multithread]) when its member functionis_lock_free
reports true.The
WaitingConcurrentQueueBack
concept provides all of the operations specified above except the pop operations.The
WaitingConcurrentQueueFront
concept provides all of the operations specified above except the push operations.The
NonWaitingConcurrentQueueBack
concept provides all of the operations specified above except the pop operations and the waiting push operations. ANonWaitingConcurrentQueueBack
is lock-free (1.10 [intro.multithread]) when its member functionis_lock_free
reports true.The
NonWaitingConcurrentQueueFront
concept provides all of the operations specified above except the push operations and the waiting pop operations. ANonWaitingConcurrentQueueFront
is lock-free (1.10 [intro.multithread]) when its member functionis_lock_free
reports true.
Add a new section:
There is one concrete concurrent queue type.
buffer_queue
[conqueues.concrete.buffer]Add a new section:
template <typename Value> class buffer_queue { buffer_queue() = delete; buffer_queue(const buffer_queue&) = delete; buffer_queue& operator =(const buffer_queue&) = delete; public: typedef Value value_type; explicit buffer_queue(size_t max_elems); template <typename Iter> buffer_queue(size_t max_elems, Iter first, Iter last); ~buffer_queue() noexcept; void close() noexcept; bool is_closed() const noexcept; bool is_empty() const noexcept; bool is_full() const noexcept; static bool is_lock_free() noexcept; Value value_pop(); queue_op_status wait_pop(Value&); queue_op_status try_pop(Value&); void push(const Value& x); queue_op_status wait_push(const Value& x); queue_op_status try_push(const Value& x); void push(Value&& x); queue_op_status wait_push(Value&& x); queue_op_status try_push(Value&& x); };The class template
buffer_queue
implements theWaitingConcurrentQueue
concept. The class templatebuffer_queue
provides a FIFO ordering. That is, the sequentially consistent order of pushes is the same as the sequentially consistet order of pops. (See the synchronization ofpush
[conqueues.concept.wait].)
buffer_queue(size_t max_elems);
- Effects:
Constructs the queue with a buffer capacity of
max_elems
.- Throws:
Any exception thrown by constructing the internal arrays or mutexes.
template <typename Iter> buffer_queue(size_t max_elems, Iter first, Iter last);
- Effects:
Constructs the queue with a buffer capacity of
max_elems
. Initializes the internal array by iterating fromfirst
tolast
.- Throws:
Any exception thrown by constructing the internal arrays or mutexes.
~buffer_queue() noexcept;
- Effects:
Destroys the queue. Any elements remaining within the queue are discarded.
Add a new section:
Additional tools help to use and manage concurrent queues.
Add a new section:
Access to only a single end of a queue is a valuable code structuring tool. A single end can also provide unambiguous
begin
andend
operations that return iterators.
generic_queue_back
[conqueues.tools.back]Add a new section:
template <typename Queue> class generic_queue_back { public: typedef typename Queue::value_type value_type; typedef value_type& reference; typedef const value_type& const_reference; typedef implementation-defined iterator; typedef const iterator const_iterator; generic_queue_back(Queue& queue); generic_queue_back(Queue* queue); generic_queue_back(const generic_queue_back& other) = default; generic_queue_back& operator =(const generic_queue_back& other) = default; void close() noexcept; bool is_closed() const noexcept; bool is_empty() const noexcept; bool is_full() const noexcept; static bool is_lock_free() noexcept; bool has_queue() const noexcept; iterator begin(); iterator end(); const iterator cbegin(); const iterator cend(); void push(const value_type& x); queue_op_status wait_push(const value_type& x); queue_op_status try_push(const value_type& x); void push(value_type&& x); queue_op_status wait_push(value_type&& x); queue_op_status try_push(value_type&& x); };The class template
generic_queue_back
implementsWaitingConcurrentQueueBack
generic_queue_back(Queue& queue);
generic_queue_back(Queue* queue);
- Effects:
Constructs the queue back with a pointer to the queue object given.
~generic_queue_back() noexcept;
- Effects:
Destroys the queue back.
bool has_queue() const noexcept;
- Returns:
true
if the contained pointer is not null.false
otherwise.
generic_queue_front
[conqueues.tools.front]Add a new section:
template <typename Queue> class generic_queue_front { public: typedef typename Queue::value_type value_type; typedef value_type& reference; typedef const value_type& const_reference; typedef implementation-defined iterator; typedef const iterator const_iterator; generic_queue_front(Queue& queue); generic_queue_front(Queue* queue); generic_queue_front(const generic_queue_front& other) = default; generic_queue_front& operator =(const generic_queue_front& other) = default; void close() noexcept; bool is_closed() const noexcept; bool is_empty() const noexcept; bool is_full() const noexcept; static bool is_lock_free() noexcept; bool has_queue() const noexcept; iterator begin(); iterator end(); const iterator cbegin(); const iterator cend(); value_type value_pop(); queue_op_status wait_pop(value_type& x); queue_op_status try_pop(value_type& x); };The class template
generic_queue_front
implementsWaitingConcurrentQueueFront
generic_queue_front(Queue& queue);
generic_queue_front(Queue* queue);
- Effects:
Constructs the queue front with a pointer to the queue object given.
~generic_queue_front() noexcept;
- Effects:
Destroys the queue front.
bool has_queue() const noexcept;
- Returns:
true
if the contained pointer is not null.false
otherwise.
Add a new section:
Occasionally it is best to have a binary interface to any concurrent queue of a given element type. This binary interface is provided by a base class with virtual members and a generic wrapper class that references any queue through that base class.
queue_base
[conqueues.tools.base]Add a new section:
template <typename Value> class queue_base { public: typedef Value value_type; typedef value_type& reference; typedef const value_type& const_reference; virtual ~queue_base noexcept(); virtual void close() noexcept = 0; virtual bool is_closed() const noexcept = 0; virtual bool is_empty() const noexcept = 0; virtual bool is_full() const noexcept = 0; virtual bool is_lock_free() const noexcept = 0; virtual void push(const Value& x) = 0; virtual queue_op_status wait_push(const Value& x) = 0; virtual queue_op_status try_push(const Value& x) = 0; virtual void push(Value&& x) = 0; virtual queue_op_status wait_push(Value&& x) = 0; virtual queue_op_status try_push(Value&& x) = 0; virtual Value value_pop() = 0; virtual queue_op_status wait_pop(Value&) = 0; virtual queue_op_status try_pop(Value&) = 0; };The class template
queue_base
, and all classes derived from it, shall implement theWaitingConcurrentQueue
concept.
~queue_base() noexcept;
- Effects:
Destroys the queue.
Add a new section:
template <typename Queue> class queue_wrapper : public virtual queue_base <typename Queue::value_type> { public: typedef typename Queue::value_type value_type; typedef value_type& reference; typedef const value_type& const_reference; queue_wrapper(Queue* arg); queue_wrapper(Queue& arg); virtual ~queue_wrapper() noexcept; virtual void close() noexcept; virtual bool is_closed() const noexcept; virtual bool is_empty() const noexcept; virtual bool is_full() const noexcept; virtual bool is_lock_free() const noexcept; virtual void push(const value_type& x); virtual queue_op_status wait_push(const value_type& x); virtual queue_op_status try_push(const value_type& x); virtual void push(value_type&& x); virtual queue_op_status wait_push(value_type&& x); virtual queue_op_status try_push(value_type&& x); virtual value_type value_pop(); virtual queue_op_status wait_pop(value_type& x); virtual queue_op_status try_pop(value_type& x); };
Add a new section:
In addition to binary interfaces to queues, binary interfaces to ends are also useful.
template <typename Value> alias queue_back = generic_queue_back< queue_base< Value > >; template <typename Value> alias queue_front = generic_queue_front< queue_base< Value > >;
Add a new section:
Automatically managing references to queues can be helpful when queues are used as a communication medium.
shared_queue_back
[conqueues.tools.sharedback]Add a new section:
template <typename Value> class shared_queue_back { public: typedef typename Value value_type; typedef value_type& reference; typedef const value_type& const_reference; typedef implementation-defined iterator; typedef const iterator const_iterator; shared_queue_back(const shared_queue_back& other); shared_queue_back& operator =(const shared_queue_back& other); void close() noexcept; bool is_closed() const noexcept; bool is_empty() const noexcept; bool is_full() const noexcept; bool is_lock_free() const noexcept; iterator begin(); iterator end(); const iterator cbegin(); const iterator cend(); void push(const value_type& x); queue_op_status wait_push(const value_type& x); queue_op_status try_push(const value_type& x); void push(value_type&& x); queue_op_status wait_push(value_type&& x); queue_op_status try_push(value_type&& x); };The class template
shared_queue_back
implementsWaitingConcurrentQueueBack
shared_queue_back(const shared_queue_back& other);
shared_queue_back& operator =(const shared_queue_back& other) = default;
- Effects:
Copy the pointer to the queue, but keep the back of the queue reference counted.
~shared_queue_back() noexcept;
- Effects:
Destroys the queue back. If this is the last back reference, and there are no front references, destroy the queue. If this is the last back reference, and there are front references, close the queue.
shared_queue_front
[conqueues.tools.front]Add a new section:
template <typename Queue> class shared_queue_front { public: typedef typename Queue::value_type value_type; typedef value_type& reference; typedef const value_type& const_reference; typedef implementation-defined iterator; typedef const iterator const_iterator; shared_queue_front(Queue& queue); shared_queue_front(Queue* queue); shared_queue_front(const shared_queue_front& other) = default; shared_queue_front& operator =(const shared_queue_front& other) = default; void close() noexcept; bool is_closed() const noexcept; bool is_empty() const noexcept; bool is_full() const noexcept; bool is_lock_free() const noexcept; bool has_queue() const noexcept; iterator begin(); iterator end(); const iterator cbegin(); const iterator cend(); value_type value_pop(); queue_op_status wait_pop(value_type& x); queue_op_status try_pop(value_type& x); };The class template
shared_queue_front
implementsWaitingConcurrentQueueFront
shared_queue_front(const shared_queue_front& other);
shared_queue_front& operator =(const shared_queue_front& other) = default;
- Effects:
Copy the pointer to the queue, but keep the front of the queue reference counted.
~shared_queue_front() noexcept;
- Effects:
Destroys the queue front. If this is the last front reference, and there are no back references, destroy the queue. If this is the last front reference, and there are back references, close the queue.
share_queue_ends
[conqueues.tools.shareendsfront]Add a new section:
template <typename Queue, typename ... Args>
std::pair< shared_queue_back<typename Queue::value_type>,
shared_queue_front<typename Queue::value_type> >
share_queue_ends(Args ... args);
- Effects:
Constructs a
Queue
with the givenArgs
. Initializes a set of reference counters for that queue.- Returns:
a pair consisting of one
shared_queue_back
and oneshared_queue_front
.
This paper revises P0260R0 - 2016-02-14 as follows.
Remove pure virtuals from queue_wrapper
.
Correct queue::pop
to value_pop
.
Remove nonblocking operations.
Remove non-locking buffer queue concrete class.
Tighten up push/pop wording on closed queues.
Tighten up push/pop wording on synchronization.
Add note about possible non-FIFO behavior.
Define buffer_queue
to be FIFO.
Make wording consistent across attributes.
Add a restriction on element special methods using the queue.
Make is_lock_free()
for only non-waiting functions.
Make is_lock_free()
static for non-indirect classes.
Make is_lock_free() noexcept
.
Make has_queue() noexcept
.
Make destructors noexcept
.
Replace "throws nothing" with noexcept
.
Make the remarks about the usefulness of is_empty()
and is_full
into notes.
Make the non-static member functions
is_
... and has_
... functions
const
.
P0260R0 revised N3533 - 2013-03-12 as follows.
Update links to source code.
Add wording.
Leave the name facility out of the wording.
Leave the push-front facility out of the wording.
Leave the reopen facility out of the wording.
Leave the storage iterator facility out of the wording.
N3532 revised N3434 = 12-0043 - 2012-01-14 as follows.
Add more exposition.
Provide separate non-blocking operations.
Add a section on the lock-free queues.
Argue against push-back operations.
Add a cautionary note
on the usefulness of is_closed()
.
Expand the cautionary note
on the usefulness of is_empty()
.
Add is_full()
.
Add a subsection on element type requirements.
Add a subsection on exception handling.
Clarify ordering constraints on the interface.
Add a subsection on a lock-free concrete queue.
Add a section on content iterators, distinct from the existing streaming iterators section.
Swap front and back names, as requested.
General expository cleanup.
Add an 'Revision History' section.
N3434 revised N3353 = 12-0043 - 2012-01-14 as follows.
Change the inheritance-based interface to a pure conceptual interface.
Put 'try' operations into a separate subsection.
Add a subsection on non-blocking operations.
Add a subsection on push-back operations.
Add a subsection on queue ordering.
Merge the 'Binary Interface' and 'Managed Indirection' sections into a new 'Conceptual Tools' section. Expand on the topics and their rationale.
Add a subsection to 'Conceptual Tools' that provides for type erasure.
Remove the 'Synopsis' section.
Add an 'Implementation' section.